In this review, we will be comparing Oberon 1 and BW 606, two Passive Bookshelf speakers from DALI and Bowers Wilkins. Let's have a brief look at the main features
of DALI Oberon 1 and B&W 606 first before getting into our more
detailed comparison.
What size room are the DALI Oberon 1 and B&W 606 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the DALI Oberon 1 and B&W 606 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Oberon 1 and BW 606 are 2-way speakers.
| Driver |
DALI Oberon 1 |
B&W 606 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1.125-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.25-inch
|
1 x 6.5-inch
|
Oberon 1 features a 1.125" Soft-Dome Tweeter and 1 x 5.25" Wood Fiber Woofer with a Crossover frequency at 2800Hz. On the other hand, the BW 606 features a 1" Decoupled Carbon Hard-Dome Tweeter and 1 x 6.5" Continuum Woofer .
Frequency Response
Oberon 1 has a frequency range of 51-26k Hz whereas BW 606 has a frequency range of 52-28k Hz. With a minimum frequency of 51Hz, the Oberon 1 can go slightly deeper then the BW 606's min frequency of 52Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Oberon 1 is a 6 ohms speaker compared to the BW 606 which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. Oberon 1 sensitivity is rated at 86 dB and the BW 606's is rated at 88 dB. This 2 dB difference makes the B&W 606 a more sensitive speaker compared to DALI Oberon 1, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Oberon 1 can handle a max power of 120 watts RMS from the amp the whereas Oberon 1 has a max power handling value of 100 watts RMS , 20 watts less than the BW 606.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
BW 606 features Post posts which make bi-amping or bi-wiring possible. Oberon 1 has a Post which doesn't feature bi-amping/bi-wiring.
DALI Oberon 1's Post terminals
B&W 606's Post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both Oberon 1 and BW 606 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare DALI Oberon 1's and B&W 606's external dimensions. DALI Oberon 1 has external dimensions of 275.0 x 164.0 x 228.0mm ( 10-13/16 x 6-7/16 x 8-15/16inch) whereas B&W 606 has external dimensions of 345.0 x 190.0 x 324.0mm ( 13.5 x 7.4 x 12.7inch) .
B&W 606 is clearly the larger of the two speakers. Its body is 26mm wider, 70mm taller and 96mm deeper than DALI Oberon 1.
Below you can see the front view size comparison of DALI Oberon 1 and B&W 606 in scale.
Comparison image of DALI Oberon 1 and B&W 606 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the DALI Oberon 1 is approximately 373.9cm2 / 58.0inch2 and base area of the B&W 606 is approximately 615.6cm2 / 95.4inch2. The Oberon 1 requires 39% less surface area than the BW 606 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of DALI Oberon 1 and B&W 606 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The DALI Oberon 1 weighs 4.18kg / 9.2lbs and the B&W 606 weighs 6.90kg / 15.2lbs. This makes the BW 606 65% heavier than the Oberon 1.
Here is a comparison of how Oberon 1 and BW 606's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of DALI Oberon 1?
Here are the items that are included inside the box of Oberon 1:
2 Bookshelf loudspeakers2 Grilles8 Rubber bumpersManual
What's in the Box of B&W 606?
Here are the items that come with the BW 606:
2 Bookshelf loudspeakers2 Grilles2 Two-piece foam port plugs8 Self-adhesive rubber feet4 Jumper-straps (pre-installed)ManualBowers & Wilkins brochureWarranty Information
 Low Frequency Response |
51 Hz
vs
52 Hz
|
Generates deeper bass |
 Mounting Bracket |
Yes
vs
No
|
Allows mounting on walls |
 Height |
275mm
vs
345mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
373cm2 (164x228mm)
vs
615cm2 (190x324mm)
|
Takes less floor space |
 Price per pair* |
599USD
vs
899USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
120 watts
vs
100 watts
|
Handle more power from your amplifier |
 Sensitivity |
88 dB
vs
86 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
| Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
 High Frequency Response |
28k Hz
vs
26k Hz
|
Generates higher frequency |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
| General |
DALI Oberon 1 |
Bowers & Wilkins 606 |
| Brand |
DALI |
Bowers Wilkins |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
25-100 watts |
30-120 watts |
| Sensitivity |
86 dB |
88 dB |
| Impedance |
6 ohms |
8 ohms |
| Impedance |
n/a |
3.7 ohms |
| Frequency Response |
51-26k Hz |
52-28k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5.25" |
6.5" |
| Woofer Composition |
Wood Fiber |
Continuum |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1.125" |
1" |
| Tweeter Type |
Soft-Dome |
Hard-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2800Hz |
n/a |
| Firing Direction |
rear |
rear |
| Suggested Break-in Period |
n/a |
allow up to a week for the temperature effects to stabilise and 15 hours of average use for the parts to attain their intended design characteristics. |
Physical Specs |
|
|
| Height |
275.0mm (10.8") |
345.0mm (13.6") |
| Width |
164.0mm (6.5") |
190.0mm (7.5") |
| Depth |
228.0mm (9") |
324.0mm (12.8") |
| Weight |
4.18kg (9.2lbs) |
6.90kg (15.2lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
MDF/Vinyl |
| Available Colors |
Black Ash, Light Oak, Dark Walnut, White |
Black, White, Oak |
| Mounting Bracket |
Keyhole |
No |
| Recommended Stand Height |
26-28" |
24-26" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |