In this review, we will be comparing Reference Alpha 1 and Reference 5 Meta, two Passive Floor-standing speakers from Canton and KEF.
Let's have a brief look at the main features
of Canton Reference Alpha 1 and KEF Reference 5 Meta first before getting into our more
detailed comparison.
| Key Specs | Canton Reference Alpha 1 | KEF Reference 5 Meta |
|---|
| Brand | Canton Germany · founded 1972 | KEF United Kingdom · founded 1961 |
|---|
| Design | 2-way | 3-way |
|---|
| Uni-Q driver | — | 12th Generation Uni-Q |
|---|
| Tweeter | — | 1" aluminium dome with MAT |
|---|
| Midrange | — | 5" |
|---|
| Woofer | — | 4 x 6.5" aluminium cone |
|---|
| Frequency response | 18-40k Hz | 40-35k Hz |
|---|
| Sensitivity | 89 dB | 88 dB |
|---|
| Impedance | 4 ohms | 4 ohms |
|---|
| Power range | — | 50-400 watts |
|---|
| Weight | 145.00kg / 319lbs | 60.20kg / 132.4lbs |
|---|
| Dimensions (H x W x D) | 64.57" x 18.11" x 28.35" 1640.1 x 460.0 x 720.1mm | 55.2" x 12.7" x 18.4" 1402 x 323 x 467 mm |
|---|
What size room are the Canton Reference Alpha 1 and KEF Reference 5 Meta speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Canton Reference Alpha 1 |
KEF Reference 5 Meta |
| Near-field |
Bad |
Are you nuts? |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Good |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
One of the fundamental differences between these two speakers is that Reference Alpha 1 is a 2-way design whereas the Reference 5 Meta is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Canton Reference Alpha 1 |
KEF Reference 5 Meta |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
-inch
|
1-inch
|
|
Midrange
|
- |
1 x 5-inch |
|
Woofer
|
x -inch
|
4 x 6.5-inch
|
Reference Alpha 1 features a " Tweeter and x " Woofer with a Crossover frequency at 170/3100 Hz. On the other hand, the Reference 5 Meta features a 1" aluminium dome with MAT Tweeter, a 5" Midrange and 4 x 6.5" aluminium cone Woofer with a Crossover frequency at 450Hz and 2100Hz.
Frequency Response
Reference Alpha 1 has a frequency range of 18-40k Hz whereas Reference 5 Meta has a frequency range of 40-35k Hz. With a minimum frequency of 18Hz, the Reference Alpha 1 can go significantly deeper on the low side and provide stronger bass compared to the Reference 5 Meta's min frequency of 40Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Impedance and Sensitivity
Reference Alpha 1 and Reference 5 Meta have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Reference Alpha 1 sensitivity is rated at 89 dB and the Reference 5 Meta's is at 88 dB. This 1 dB difference makes the Canton Reference Alpha 1 a more sensitive speaker compared to KEF Reference 5 Meta, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Reference Alpha 1 and the Reference Alpha 1 can provide this impedance level.
Sensitivity
Floor-standing Speakers
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Reference 5 Meta features Custom 5-way bi-wire tool-less binding posts posts which make bi-amping or bi-wiring possible. Reference Alpha 1 has a Binding post which doesn't feature bi-amping/bi-wiring.
KEF Reference 5 Meta's Custom 5-way bi-wire tool-less binding posts terminals allows Bi-amping or bi-wiring
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Canton Reference Alpha 1's and KEF Reference 5 Meta's external dimensions. Canton Reference Alpha 1 has external dimensions of 1640.1 x 460.0 x 720.1mm (64.57 x 18.11 x 28.35inch) whereas KEF Reference 5 Meta has external dimensions of 1402 x 323 x 467 mm (55.2 x 12.7 x 18.4 in.).
Canton Reference Alpha 1 is clearly the larger of the two speakers. Its body is 137mm wider, 238.1mm taller and 253.1mm deeper than KEF Reference 5 Meta.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Canton Reference Alpha 1 needs about 120% more floor or shelf area. Canton Reference Alpha 1 is 253mm deeper, so it stands that much further out from the wall. Canton Reference Alpha 1 is 238mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Canton Reference Alpha 1 is approximately 3312.5cm2 / 513.4inch2 and base area of the KEF Reference 5 Meta is approximately 1508.4cm2 / 233.8inch2. The Reference Alpha 1 requires 120% more surface area than the Reference 5 Meta which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Canton Reference Alpha 1 weighs 145.00kg / 319lbs and the KEF Reference 5 Meta weighs 60.20kg / 132.4lbs. This makes the Reference Alpha 1 141% heavier than the Reference 5 Meta.
Here is a comparison of how Reference Alpha 1 and Reference 5 Meta's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
Sensitivity |
89 dB
vs
88 dB
|
Play louder with same amount of amplification power |
Low Frequency Response |
18 Hz
vs
40 Hz
|
Generates deeper bass |
High Frequency Response |
40k Hz
vs
35k Hz
|
Generates higher frequency |
Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
Woofer Size |
6.5 inches
vs
inches
|
Larger woofer |
Height |
1402mm
vs
1640mm
|
Easier to fit in smaller spaces |
Base Surface Area |
1508cm2
vs
3312cm2
|
Takes less floor space |
Price per pair* |
22000USD
vs
77000USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Canton Reference Alpha 1 |
KEF Reference 5 Meta |
| Brand |
Canton |
KEF |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Sensitivity |
89 dB |
88 dB |
| Impedance |
4 ohms |
4 ohms |
| Impedance |
n/a |
3.2 ohms |
| Frequency Response |
18-40k Hz |
40-35k Hz |
Drivers |
|
|
| Woofer Quantity |
|
4 |
| Woofer Size |
" |
6.5" |
| Woofer Composition |
|
aluminium cone |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
1" |
| Tweeter Type |
n/a |
aluminium dome with MAT |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
5" |
| Crossover Frequency |
170/3100 Hz |
450Hz and 2100Hz |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
1640.1mm (64.6") |
1402.0mm (55.2") |
| Width |
460.0mm (18.1") |
323.0mm (12.7") |
| Depth |
720.1mm (28.4") |
467.0mm (18.4") |
| Weight |
145.00kg (319lbs) |
60.20kg (132.4lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Available Colors |
n/a |
High-Gloss White/Blue, High-Gloss White/Champagne, High-Gloss Black/Grey, High-Gloss Black/Copper, Satin Walnut/Silver |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
n/a |
Yes |
Other |
|
|
| Parts Warranty |
|
5 years |
| Labor Warranty |
|
5 years |
These sit in different price classes - Canton Reference Alpha 1 costs roughly 3.5x what KEF Reference 5 Meta does. Expect it to lead on paper; the question is whether the gap is audible enough in your room to be worth it.
| Area | Better | Why |
|---|
| Bass | A | Canton Reference Alpha 1 digs deeper - 18Hz against 40Hz. |
| Amplifier needs | evenly matched | Similar sensitivity (89dB vs 88dB) - both want much the same power. |
| Size | depends | KEF Reference 5 Meta is easier to place; Canton Reference Alpha 1 is bigger, which usually goes with fuller bass. Your room decides. |
| Expandability | B | KEF Reference 5 Meta: bi-amping. |
| Price | B | KEF Reference 5 Meta is cheaper - $22,000 against $77,000, about 71% less; arguably a different class. |
A Canton Reference Alpha 1 B KEF Reference 5 Meta
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Neither runs away with it - they trade advantages. Let the "depends" rows and your own room settle it. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 40Hz anyway, which makes the cheaper KEF Reference 5 Meta much easier to justify. Match it to your room: we rate KEF Reference 5 Meta the better fit for a very large room; elsewhere the two are rated the same.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.