In this review, we will be comparing Reference Alpha 1 and Opticon 8 MK2, two Passive Floor-standing speakers from Canton and DALI.
Let's have a brief look at the main features
of Canton Reference Alpha 1 and DALI Opticon 8 II first before getting into our more
detailed comparison.
| Key Specs | Canton Reference Alpha 1 | DALI Opticon 8 II |
|---|
| Brand | Canton Germany · founded 1972 | DALI Denmark · founded 1983 |
|---|
| Design | 2-way | 3-way |
|---|
| Tweeter | — | 17 x 45 mm ribbon + 1.125" Soft-dome + ribbon Hybrid |
|---|
| Midrange | — | 6.5" |
|---|
| Woofer | — | 2 x 8" Wood Fiber |
|---|
| Frequency response | 18-40k Hz | 38-30k Hz |
|---|
| Sensitivity | 89 dB | 88 dB |
|---|
| Impedance | 4 ohms | 4 ohms |
|---|
| Power range | — | 40-300 watts |
|---|
| Weight | 145.00kg / 319lbs | 37.10kg / 81.6lbs |
|---|
| Dimensions (H x W x D) | 64.57" x 18.11" x 28.35" 1640.1 x 460.0 x 720.1mm | 45-1/4" x 9-1/2" x 18-1/16" 1150.0 x 245.0 x 459.0mm |
|---|
What size room are the Canton Reference Alpha 1 and DALI Opticon 8 II speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Canton Reference Alpha 1 |
DALI Opticon 8 II |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
One of the fundamental differences between these two speakers is that Reference Alpha 1 is a 2-way design whereas the Opticon 8 MK2 is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Canton Reference Alpha 1 |
DALI Opticon 8 II |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
-inch
|
17 x 45 mm ribbon + 1.125-inch
|
|
Midrange
|
- |
1 x 6.5-inch |
|
Woofer
|
x -inch
|
2 x 8-inch
|
Reference Alpha 1 features a " Tweeter and x " Woofer with a Crossover frequency at 170/3100 Hz. On the other hand, the Opticon 8 MK2 features a 17 x 45 mm ribbon + 1.125" Soft-dome + ribbon Hybrid Tweeter, a 6.5" Midrange and 2 x 8" Wood Fiber Woofer with a Crossover frequency at 380Hz, 2200Hz and 14,000Hz.
Frequency Response
Reference Alpha 1 has a frequency range of 18-40k Hz whereas Opticon 8 MK2 has a frequency range of 38-30k Hz. With a minimum frequency of 18Hz, the Reference Alpha 1 can go significantly deeper on the low side and provide stronger bass compared to the Opticon 8 MK2's min frequency of 38Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Impedance and Sensitivity
Reference Alpha 1 and Opticon 8 MK2 have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Reference Alpha 1 sensitivity is rated at 89 dB and the Opticon 8 MK2's is at 88 dB. This 1 dB difference makes the Canton Reference Alpha 1 a more sensitive speaker compared to DALI Opticon 8 II, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Reference Alpha 1 and the Reference Alpha 1 can provide this impedance level.
Sensitivity
Floor-standing Speakers
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Opticon 8 MK2 features Post posts which make bi-amping or bi-wiring possible. Reference Alpha 1 has a Binding post which doesn't feature bi-amping/bi-wiring.
DALI Opticon 8 II's Post terminals allows Bi-amping or bi-wiring
DALI Opticon 8 II Port
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Canton Reference Alpha 1's and DALI Opticon 8 II's external dimensions. Canton Reference Alpha 1 has external dimensions of 1640.1 x 460.0 x 720.1mm (64.57 x 18.11 x 28.35inch) whereas DALI Opticon 8 II has external dimensions of 1150.0 x 245.0 x 459.0mm (45-1/4 x 9-1/2 x 18-1/16inch).
Canton Reference Alpha 1 is clearly the larger of the two speakers. Its body is 215mm wider, 490.1mm taller and 261.1mm deeper than DALI Opticon 8 II.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Canton Reference Alpha 1 needs about 195% more floor or shelf area. Canton Reference Alpha 1 is 261mm deeper, so it stands that much further out from the wall. Canton Reference Alpha 1 is 490mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Canton Reference Alpha 1 is approximately 3312.5cm2 / 513.4inch2 and base area of the DALI Opticon 8 II is approximately 1124.6cm2 / 174.3inch2. The Reference Alpha 1 requires 195% more surface area than the Opticon 8 MK2 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Canton Reference Alpha 1 weighs 145.00kg / 319lbs and the DALI Opticon 8 II weighs 37.10kg / 81.6lbs. This makes the Reference Alpha 1 291% heavier than the Opticon 8 MK2.
Here is a comparison of how Reference Alpha 1 and Opticon 8 MK2's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of DALI Opticon 8 II?
Here are the items that come with the Opticon 8 MK2:
- Floorstanding loudspeaker
- Grille
- 2 Binding post jumpers (pre-installed)
- 4 Outrigger feet
- 4 Spikes (with lock nuts)
- 4 Rubber pads
- 4 Screws
- Hex-key
- Wrench
- Quick Start Guide
- Congratulations Card
Sensitivity |
89 dB
vs
88 dB
|
Play louder with same amount of amplification power |
Low Frequency Response |
18 Hz
vs
38 Hz
|
Generates deeper bass |
High Frequency Response |
40k Hz
vs
30k Hz
|
Generates higher frequency |
Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
Woofer Size |
8 inches
vs
inches
|
Larger woofer |
Height |
1150mm
vs
1640mm
|
Easier to fit in smaller spaces |
Base Surface Area |
1124cm2
vs
3312cm2
|
Takes less floor space |
Price per pair* |
4200USD
vs
77000USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Canton Reference Alpha 1 |
DALI Opticon 8 MK2 |
| Brand |
Canton |
DALI |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Sensitivity |
89 dB |
88 dB |
| Impedance |
4 ohms |
4 ohms |
| Frequency Response |
18-40k Hz |
38-30k Hz |
Drivers |
|
|
| Woofer Quantity |
|
2 |
| Woofer Size |
" |
8" |
| Woofer Composition |
|
Wood Fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
17 x 45 mm ribbon + 1.125" |
| Tweeter Type |
n/a |
Soft-dome + ribbon Hybrid |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
6.5" |
| Crossover Frequency |
170/3100 Hz |
380Hz, 2200Hz and 14,000Hz |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
1640.1mm (64.6") |
1150.0mm (45.3") |
| Width |
460.0mm (18.1") |
245.0mm (9.6") |
| Depth |
720.1mm (28.4") |
459.0mm (18.1") |
| Weight |
145.00kg (319lbs) |
37.10kg (81.6lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF/Wood-grain vinyl |
| Available Colors |
n/a |
Satin Black, Tobacco Oak, Satin White |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
n/a |
Yes |
Other |
|
|
| Parts Warranty |
|
5 Years |
| Labor Warranty |
|
5 Years |
These sit in different price classes - Canton Reference Alpha 1 costs roughly 18.3x what DALI Opticon 8 II does. Expect it to lead on paper; the question is whether the gap is audible enough in your room to be worth it.
| Area | Better | Why |
|---|
| Bass | A | Canton Reference Alpha 1 digs deeper - 18Hz against 38Hz. |
| Amplifier needs | evenly matched | Similar sensitivity (89dB vs 88dB) - both want much the same power. |
| Size | depends | DALI Opticon 8 II is easier to place; Canton Reference Alpha 1 is bigger, which usually goes with fuller bass. Your room decides. |
| Expandability | B | DALI Opticon 8 II: bi-amping. |
| Price | B | DALI Opticon 8 II is cheaper - $4,200 against $77,000, about 95% less; arguably a different class. |
A Canton Reference Alpha 1 B DALI Opticon 8 II
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Neither runs away with it - they trade advantages. Let the "depends" rows and your own room settle it. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 38Hz anyway, which makes the cheaper DALI Opticon 8 II much easier to justify. In a large or open-plan room, Canton Reference Alpha 1 has the cabinet volume to fill it more easily; in a small room, near a wall or at desk distance, DALI Opticon 8 II is the easier speaker to get right.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.