SpeakerDecision
  • SPEAKERS
    • By Type
      Passive Bookshelf Speakers Passive Floor-standing Speakers Passive Center Channel Speakers Passive In-wall Speakers All Passive Speakers Powered Subwoofers Powered Stereo Speakers
      By Feature
      HDMI Input Room Correction Subwoofer Output Front Firing Port Handheld Remote Roon Ready
      By Brand
      Acoustic Energy Aperion Arendal Sound ATC Audio-Technica Audioengine Bluesound Bowers Wilkins Buchardt Cambridge Audio Canton Castle DALI Definitive Technology Dynaudio Edifier ELAC Emotiva Fluance Focal Fyne Audio Genelec GoldenEar Harbeth Jamo JBL Kanto KEF KLH Klipsch Leak Mackie Magico Magnepan MartinLogan McIntosh Mission MoFi Monitor Audio Nuvo Onkyo OSD Paradigm Perlisten Polk Audio PS Audio PSB Q Acoustics REL Revel Russound Sennheiser Sonos Sonus faber Sony Spendor SVS Tannoy Technics Triangle Velodyne Victrola Wharfedale Wilson Audio Yamaha
  • AMPLIFIERS
    • By Type
      All Amplifiers Integrated Amplifiers Stereo Receivers Streaming Amplifiers Power Amplifiers Compact Amplifiers
      By Power
      Up to 60 watts 61 to 90 watts 91 to 120 watts 121 to 180 watts Over 180 watts
      By Feature
      HDMI Input Room Correction Subwoofer Output Handheld Remote Roon Ready
      Home Theater
      All Home Theater Receivers Anthem ARCAM Denon Integra JBL Marantz MartinLogan McIntosh NAD Onkyo Sony Yamaha
      Headphone Amps
      All Headphone Amplifiers Cambridge Audio Eversolo iFi Audio McIntosh Naim Pro-Ject Rotel Schiit Audio Sennheiser Yamaha
      Multi-Zone
      All Multi-Zone Amplifiers JBL McIntosh OSD Rotel Russound Sonos
      By Brand
      Accuphase Advance Paris Anthem Arcam Audio Research AudioControl Audioengine Audiolab Bluesound Bose Buchardt Cambridge Audio Cayin Denon Devialet ELAC Emotiva Esoteric Eversolo FiiO Fosi Audio Hegel HiFi Rose Integra JBL Layer Audio Design LEAK Luxman Marantz Mark Levinson McIntosh Michi MISSION MOON Musical Fidelity NAD Naim Onkyo OSD Parasound Pass Labs Peachtree PrimaLuna Primare PS Audio Rega Rogue Audio Roksan Rotel Schiit Audio Sonos Sony SVS T+A TEAC Technics Vincent WiiM Yamaha
  • SOUNDBARS
    • Soundbars
      Soundbars Home All Soundbars (filter + sort) Size Simulator
      By TV Size
      43-50 inch TVs 55 inch TVs 65 inch and larger
      By Feature
      Dolby Atmos height channels Subwoofer included Can add rear speakers Compact (30 in or narrower) Under $500
      By Brand
      Bluesound Bose Denon Devialet Dual Focal Furrion Harman Kardon JBL KEF Klipsch Marshall Naim Polk Audio Samsung Sennheiser Sonos Sony WiiM Yamaha
  • SMART FIND
  • TOOLS
  • BLOG
  1. Home
  2. Buchardt S400 MK3 vs Dynaudio Evoke 30

Buchardt S400 MK3 vs Dynaudio Evoke 30 Comparison

x
Speaker to replace
Change

Buchardt S400 MK3

Passive Bookshelf | 33-20k Hz

Buchardt S400 MK3
Check price atAmazon›
Change
    
Dynaudio Evoke 30

Passive Floor-standing | 40-23k Hz

Dynaudio Evoke 30
Check price atAmazon›
Buchardt S400 MK3 Buchardt S400 MK3
Check price atAmazon›
Dynaudio Evoke 30 Dynaudio Evoke 30
Check price atAmazon›
Buchardt S400 MK3
See at AMAZON
Dynaudio Evoke 30
See at AMAZON

Buchardt S400 MK3 vs Dynaudio Evoke 30 Speaker Comparison

In this review, we will be comparing two different types of speakers. Buchardt S400 MK3 is a Bookshelf speaker whereas the Evoke 30 is a Floor-standing speaker.

Let's have a brief look at the main features of Buchardt S400 MK3 and Dynaudio Evoke 30 first before getting into our more detailed comparison.

Key SpecsBuchardt S400 MK3Dynaudio Evoke 30
BrandBuchardt
Denmark · founded 2014
Dynaudio
Denmark · founded 1977
Design2-way2-way
Tweeter1" waveguide1.1"
Woofer7.5" SB Acoustics Satori Egyptian Papyrus papercone2 x 5.5" Magnesium Silicate Polymer
Frequency response33-20k Hz40-23k Hz
Sensitivity87 dB88 dB
Impedance4 ohms4 ohms
Power range30+ wattsup to 200 watts
Weight8.50kg / 18.7lbs15.50kg / 34.1lbs
Dimensions (H x W x D)15.4" x 7.8" x 11"
392 x 198 x 280 mm
36-1/4" x 10-1/2" x 13-1/2"
920.0 x 268.0 x 342.0mm

What size room are the Buchardt S400 MK3 and Dynaudio Evoke 30 speakers good for?

The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:

Listening Environment* Buchardt S400 MK3 Dynaudio Evoke 30
Near-field Poor Bad
Small Room Average Poor
Mid-size Room Good Good
Large Room Average Good
Very Large Room Poor Poor

(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2. Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)

The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.


Drivers

Both S400 MK3 and Evoke 30 are 2-way speakers.

Tweeter - 1 inchWoofer - 7.5 inch
Buchardt S400 MK3
Tweeter - 1.1 inchWoofer - 5.5 inchWoofer - 5.5 inch
Dynaudio Evoke 30

TweeterWoofer

Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.

Driver Buchardt S400 MK3 Dynaudio Evoke 30
Driver Setup 2-way 2-way
Tweeter 1-inch 1.1-inch
Midrange - -
Woofer 1 x 7.5-inch 2 x 5.5-inch

S400 MK3 features a 1" Custom aluminum dome with neodymium motor waveguide Tweeter and 1 x 7.5" SB Acoustics Satori Egyptian Papyrus papercone Woofer with a Crossover frequency at 2200Hz. On the other hand, the Evoke 30 features a 1.1" Tweeter and 2 x 5.5" Magnesium Silicate Polymer Woofer with a Crossover frequency at 1200Hz and 2300Hz.

Buchardt S400 MK3 driver frequency bandsBuchardt S400 MK3Dynaudio Evoke 3033-2.2k40-1.2kWooferMidrange2.2k-20k2.3k-23kTweeter20501002005001k2k5k10k20k40kHz, log scale

Frequency Response

S400 MK3 has a frequency range of 33-20k Hz whereas Evoke 30 has a frequency range of 40-23k Hz. With a minimum frequency of 33Hz, the S400 MK3 can go significantly deeper on the low side and provide stronger bass compared to the Evoke 30's min frequency of 40Hz.

The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.

Low Frequency

Bookshelf Speakers

S400 MK3
Evoke 30
Min
Average
Median

Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.

Impedance and Sensitivity

S400 MK3 and Evoke 30 have the same Impedance of 4 ohms but where they differ is the sensitivity levels. S400 MK3 sensitivity is rated at 87 dB and the Evoke 30's is at 88 dB. This 1 dB difference makes the Dynaudio Evoke 30 a more sensitive speaker compared to Buchardt S400 MK3, hence will play louder with the same amount of watts.

One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the S400 MK3 and the S400 MK3 can provide this impedance level.

Sensitivity

Bookshelf Speakers

S400 MK3
Evoke 30
Min
Average
Median

Power Range

Power range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.

Evoke 30 can handle a max power of 200 watts RMS, whereas S400 MK3 has a max power handling value of watts RMS, 200 watts less than the Evoke 30.

Note that higher power handling does not make a speaker louder: that depends mainly on sensitivity and impedance. The calculator below shows how loud each of these actually plays on a real amplifier.

Which plays louder on your amplifier?

Starting with a popular amplifier - change it to the one you own, or any you are considering, and watch both numbers move.

Buchardt S400 MK3
 
Dynaudio Evoke 30
 

Physical Specs

The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Buchardt S400 MK3's and Dynaudio Evoke 30's external dimensions. Buchardt S400 MK3 has external dimensions of 392 x 198 x 280 mm (15.4 x 7.8 x 11 inch) whereas Dynaudio Evoke 30 has external dimensions of 920.0 x 268.0 x 342.0mm (36-1/2 x 10-5/8 x 13-1/2inch).

Dynaudio Evoke 30 is clearly the larger of the two speakers. Its body is 70mm wider, 528mm taller and 62mm deeper than Buchardt S400 MK3.

Size, drawn to scale

FRONTBuchardt S400 MK3 front: 198 x 392 mm (7.8 x 15.4 in)Dynaudio Evoke 30 front: 268 x 920 mm (10.6 x 36.2 in)Buchardt S400 MK3198 × 392 mmDynaudio Evoke 30268 × 920 mmTOP / FOOTPRINTBuchardt S400 MK3 footprint: 198 x 280 mm (7.8 x 11 in)Dynaudio Evoke 30 footprint: 268 x 342 mm (10.6 x 13.5 in)Buchardt S400 MK3198 × 280 mmDynaudio Evoke 30268 × 342 mm
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.

One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.

Dynaudio Evoke 30 needs about 65% more floor or shelf area. Dynaudio Evoke 30 is 62mm deeper, so it stands that much further out from the wall. Dynaudio Evoke 30 is 528mm taller.

Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited. The base surface area of the Buchardt S400 MK3 is approximately 554.4cm2 / 85.9inch2 and base area of the Dynaudio Evoke 30 is approximately 916.6cm2 / 142.1inch2. The S400 MK3 requires 40% less surface area than the Evoke 30 which gives it a small advantage on placement in tight spaces.

What's in the Box of Dynaudio Evoke 30?

Here are the items that come with the Evoke 30:
  • Floorstanding loudspeaker
  • Grille
  • 4 Outrigger feet
  • 4 Spikes
  • 4 Locking nuts
  • 8 Washers
  • 8 Screws
  • Foam port plug
  • Hex-key
  • Tweeter protection cover (pre-installed)
  • Instructions for Use
  • Important Safety Instructions
  • Warranty Card


Reasons to choose Buchardt S400 MK3 over Dynaudio Evoke 30

Woofer Size 7.5 inches vs 5.5 inches Larger woofer
Low Frequency Response 33 Hz vs 40 Hz Generates deeper bass
Height 392mm vs 920mm Easier to fit in smaller spaces
Base Surface Area 554cm2 vs 916cm2 Takes less floor space
Price per pair* 2300USD vs 3500USD costs less (*prices may change depending on the seller, location and time)

Reasons to choose Dynaudio Evoke 30 over Buchardt S400 MK3

Sensitivity 88 dB vs 87 dB Play louder with same amount of amplification power
Number of Woofers 2 vs 1 More woofers
High Frequency Response 23k Hz vs 20k Hz Generates higher frequency

Buchardt S400 MK3 vs Dynaudio Evoke 30 Specs Table

Detailed comparison of specifications
General Buchardt S400 MK3 Dynaudio Evoke 30
Brand Buchardt Dynaudio
Speaker Type Bookshelf speakers Floor-standing speaker
Power Range 30+ watts up to 200 watts
Sensitivity 87 dB 88 dB
Impedance 4 ohms 4 ohms
Frequency Response 33-20k Hz 40-23k Hz
Drivers
Woofer Quantity 1 2
Woofer Size 7.5" 5.5"
Woofer Composition SB Acoustics Satori Egyptian Papyrus papercone Magnesium Silicate Polymer
Woofer Surround Material n/a Rubber
Tweeter Size 1" 1.1"
Tweeter Type waveguide n/a
Aimable Tweeter No No
Midrange Driver No No
Crossover Frequency 2200Hz 1200Hz and 2300Hz
Firing Direction n/a rear
Physical Specs
Height 392.0mm (15.4") 920.0mm (36.2")
Width 198.0mm (7.8") 268.0mm (10.6")
Depth 280.0mm (11") 342.0mm (13.5")
Weight 8.50kg (18.7lbs) 15.50kg (34.1lbs)
Enclosure Bass Reflex Bass Reflex
Finish 15mm HMR.E2 moisture-proof fiberboard MDF/Wood veneer
Available Colors Black, White, Walnut, Natural oak Oak (blonde)
Mounting Bracket No No
Grille Yes Yes
Moisture Resistancy No No
Connections
Biamp Inputs n/a No
Other
Parts Warranty 10 years 5 Years (8 Years registered)
Labor Warranty 10 years 5 Years (8 Years registered)

Verdict

A bookshelf against a floor-standing. They are built for different places in a room, so start with where these have to go rather than which looks better on paper.

AreaBetterWhy
BassABuchardt S400 MK3 digs deeper - 33Hz against 40Hz. A subwoofer would even that out.
Amplifier needsevenly matchedSimilar sensitivity (87dB vs 88dB) - both want much the same power.
SizedependsBuchardt S400 MK3 is easier to place; Dynaudio Evoke 30 is bigger, which usually goes with fuller bass. Your room decides.
TypedependsA Passive Bookshelf against a Passive Floor-standing - a different job rather than a better one.
CabinetdependsBass Reflex vs Ported.
PriceABuchardt S400 MK3 is cheaper - $2,300 against $3,500, about 34% less.

A Buchardt S400 MK3  B Dynaudio Evoke 30
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.

Which should you choose?

Buchardt S400 MK3 has the edge on paper, though the margin is not large. The rows marked "depends" may matter more to you than the score does. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 40Hz anyway, so judge these on the other rows instead. Match it to your room: we rate Buchardt S400 MK3 the better fit for a small room, and Dynaudio Evoke 30 for a large room.

And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.


Most Popular Speakers
Klipsch Reference R-51M
Klipsch R-51M
2-way | 93 dB | 8 ohms
ELAC Debut 2.0 B6.2
ELAC Debut 2.0 B6.2
2-way | 87 dB | 6 ohms
Wharfedale Elysian 2
Wharfedale Elysian 2
3-way | 89 dB | 4 ohms
KEF Q150
KEF Q150
2-way | 86 dB | 8 ohms
Bowers & Wilkins 606 S2 Anniversary Edition
B&W 606 S2
2-way | 88 dB | 8 ohms
Klipsch Reference Premiere RP-500M
Klipsch RP-500M
2-way | 93 dB | 8 ohms
Wharfedale EVO5.1
Wharfedale EVO5.1
2-way | 87 dB | 4 ohms
Wharfedale EVO4.1
Wharfedale EVO4.1
2-way | 87 dB | 8 ohms
This site contains affiliate links. We may be compensated if you make a purchase after clicking through one of them. As an Amazon Associate we earn from qualifying purchases.
Copyright © 2026 by SpeakerDecision
About Privacy Contact US Camera Decision

Report a Correction