In this review, we will be comparing P300 and LS50 Meta, two Passive Bookshelf speakers from Buchardt and KEF.
Let's have a brief look at the main features
of Buchardt P300 and KEF LS50 Meta first before getting into our more
detailed comparison.
| Key Specs | Buchardt P300 | KEF LS50 Meta |
|---|
| Brand | Buchardt Denmark · founded 2014 | KEF United Kingdom · founded 1961 |
|---|
| Design | 2-way | 2-way |
|---|
| Uni-Q driver | — | 12th Generation Uni-Q |
|---|
| Tweeter | 0.74" aluminum waveguide | 1" Hard-Dome |
|---|
| Woofer | 6" paper | 5.25" Aluminum |
|---|
| Frequency response | 37-40k Hz | 79-28k Hz |
|---|
| Sensitivity | 86 dB | 85 dB |
|---|
| Impedance | 4 ohms | 8 ohms |
|---|
| Power range | 50 - 200 watts | 40-100 watts |
|---|
| Weight | 6.30kg / 13.9lbs | 7.82kg / 17.2lbs |
|---|
| Dimensions (H x W x D) | 14.4" x 7" x 11" 365.0 x 180.0 x 280.0mm | 11-15/16" x 7.875" x 11-1/16" 303.0 x 201.0 x 281.0mm |
|---|
What size room are the Buchardt P300 and KEF LS50 Meta speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Buchardt P300 |
KEF LS50 Meta |
| Near-field |
Poor |
Average |
| Small Room |
Average |
Good |
| Mid-size Room |
Good |
Average |
| Large Room |
Average |
Poor |
| Very Large Room |
Poor |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both P300 and LS50 Meta are 2-way speakers.
Buchardt P300KEF LS50 Meta
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Buchardt P300 |
KEF LS50 Meta |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
0.74-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6-inch
|
1 x 5.25-inch
|
P300 features a 0.74" Custom fine weave soft fabric textile with CDC aluminum waveguide aluminum waveguide Tweeter and 1 x 6" paper Woofer with a Crossover frequency at 2900Hz. On the other hand, the LS50 Meta features a 1" Aluminum Hard-Dome Tweeter and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 2100Hz.
Frequency Response
P300 has a frequency range of 37-40k Hz whereas LS50 Meta has a frequency range of 79-28k Hz. With a minimum frequency of 37Hz, the P300 can go significantly deeper on the low side and provide stronger bass compared to the LS50 Meta's min frequency of 79Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
P300 is a 4 ohms speaker compared to the LS50 Meta which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the P300 can provide this impedance level.
These two speakers also have different sensitivity levels. P300 sensitivity is rated at 86 dB and the LS50 Meta's is rated at 85 dB. This 1 dB difference makes the Buchardt P300 a more sensitive speaker compared to KEF LS50 Meta, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
P300 can handle a max power of 200 watts RMS, whereas LS50 Meta has a max power handling value of 100 watts RMS, 100 watts less than the P300.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Buchardt P300's and KEF LS50 Meta's external dimensions. Buchardt P300 has external dimensions of 365.0 x 180.0 x 280.0mm (14.4 x 7 x 11inch) whereas KEF LS50 Meta has external dimensions of 303.0 x 201.0 x 281.0mm (11-15/16 x 7.875 x 11-1/16inch).
Buchardt P300 is 21mm narrower and 1mm less deeper than KEF LS50 Meta but it is also 62mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Buchardt P300 is approximately 504.0cm2 / 78.1inch2 and base area of the KEF LS50 Meta is approximately 564.8cm2 / 87.5inch2. The P300 requires 11% less surface area than the LS50 Meta which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Buchardt P300 weighs 6.30kg / 13.9lbs and the KEF LS50 Meta weighs 7.82kg / 17.2lbs. This makes the LS50 Meta 24% heavier than the P300.
Here is a comparison of how P300 and LS50 Meta's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of KEF LS50 Meta?
Here are the items that come with the LS50 Meta:
- 2 Bookshelf loudspeakers
- 2 Foam port plugs
- 8 Self-adhesive rubber feet
- Owners Manual
- Warranty Registration Card
Max Input Power |
200 watts
vs
100 watts
|
Handle more power from your amplifier |
Sensitivity |
86 dB
vs
85 dB
|
Play louder with same amount of amplification power |
Woofer Size |
6 inches
vs
5.25 inches
|
Larger woofer |
Low Frequency Response |
37 Hz
vs
79 Hz
|
Generates deeper bass |
High Frequency Response |
40k Hz
vs
28k Hz
|
Generates higher frequency |
Passive Radiator |
one 5x8-inch
vs
None
|
Increases the bass performance |
Base Surface Area |
504cm2
vs
564cm2
|
Takes less floor space |
Price per pair* |
1450USD
vs
1600USD
|
costs less (*prices may change depending on the seller, location and time) |
Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
Height |
303mm
vs
365mm
|
Easier to fit in smaller spaces |
| General |
Buchardt P300 |
KEF LS50 Meta |
| Brand |
Buchardt |
KEF |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
50 - 200 watts |
40-100 watts |
| Sensitivity |
86 dB |
85 dB |
| Impedance |
4 ohms |
8 ohms |
| Impedance |
n/a |
3.5 ohms |
| Frequency Response |
37-40k Hz |
79-28k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6" |
5.25" |
| Woofer Composition |
paper |
Aluminum |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
0.74" |
1" |
| Tweeter Type |
aluminum waveguide |
Hard-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2900Hz |
2100Hz |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
365.0mm (14.4") |
303.0mm (11.9") |
| Width |
180.0mm (7.1") |
201.0mm (7.9") |
| Depth |
280.0mm (11") |
281.0mm (11.1") |
| Weight |
6.30kg (13.9lbs) |
7.82kg (17.2lbs) |
| Enclosure |
Passive Radiator |
Bass Reflex |
| Finish |
15mm Fiberboard HMR.E2 Moisture-proof with internal bracing |
MDF/Polymer |
| Available Colors |
Black, White, Peach, Ocean, Olive |
Carbon Black,Titanium Grey,Royal Blue,Mineral White |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
n/a |
25-30" |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
n/a |
No |
Other |
|
|
| Parts Warranty |
10 years on speakers / 2 years on electronics (4 years if registered) |
5 Years |
| Labor Warranty |
10 years on speakers / 2 years on electronics (4 years if registered) |
5 Years |
No single best speaker here - they are built to different priorities, and the right one depends on your room, your amplifier and what you listen to.
| Area | Better | Why |
|---|
| Bass | A | Buchardt P300 digs deeper - 37Hz against 79Hz. |
| Amplifier needs | evenly matched | Similar sensitivity (86dB vs 85dB) - both want much the same power. |
| Amplifier match | B | KEF LS50 Meta is the easier load at 8 ohms; the other is 4 ohms and wants an amplifier rated for it. |
| Headroom | A | Buchardt P300 takes more power (200W vs 100W) - more in hand in a big room. |
| Size | depends | Similar cabinet size - neither is easier to fit. |
| Cabinet | depends | Passive Radiator vs Ported. |
| Expandability | depends | Neither adds bi-amping, a sub output or height drivers. KEF LS50 Meta sits in a wider range (10 models), so a matched surround system is easier later. |
| Price | evenly matched | Much the same money ($1,450 vs $1,600 a pair). |
A Buchardt P300 B KEF LS50 Meta
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Buchardt P300 has the edge on paper, though the margin is not large. The rows marked "depends" may matter more to you than the score does. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 79Hz anyway, so judge these on the other rows instead. Match it to your room: we rate Buchardt P300 the better fit for a mid-size room and a large room, and KEF LS50 Meta for near-field listening and a small room.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.