In this review, we will be comparing E50 and R3, two Passive Bookshelf speakers from Buchardt and KEF. Let's have a brief look at the main features
of Buchardt E50 and KEF R3 first before getting into our more
detailed comparison.
What size room are the Buchardt E50 and KEF R3 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Buchardt E50 and KEF R3 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that E50 is a 2-way design whereas the R3 is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Buchardt E50 |
KEF R3 |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
1 x 5-inch |
|
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
E50 features a 1" Custom Scanspeak textile dome waveguide Tweeter and 1 x 6.5" PURIFI Extended Stroke Woofer with a Crossover frequency at 2000Hz. On the other hand, the R3 features a 1" aluminum Dome Tweeter , a 5" Midrange and 1 x 6.5" Hybrid aluminum Woofer with a Crossover frequency at 400Hz and 2900Hz.
Frequency Response
E50 has a frequency range of 36-30k HZ whereas R3 has a frequency range of 52-28k Hz. With a minimum frequency of 36Hz, the E50 can go significantly deeper on the low side and provide stronger bass compared to the R3's min frequency of 52Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
E50 is a 4 ohms speaker compared to the R3 which has a nominal impedance of 8 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the E50 can provide this impedance level.
These two speakers also have different sensitivity levels. E50 sensitivity is rated at 85 dB and the R3's is rated at 87 dB. This 2 dB difference makes the KEF R3 a more sensitive speaker compared to Buchardt E50, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
E50 can handle a max power of 200 watts RMS from the amp the whereas R3 has a max power handling value of 180 watts RMS, 20 watts less than the E50.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
KEF R3 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Buchardt E50's and KEF R3's external dimensions. Buchardt E50 has external dimensions of 395 x 190 x 284 mm ( 15.5 x 7.5 x 11.1 inch) whereas KEF R3 has external dimensions of 423.0 x 199.0 x 337.0mm ( 16-5/8 x 7-13/16 x 13-1/4inch) .
KEF R3 is clearly the larger of the two speakers. Its body is 9mm wider, 28mm taller and 53mm deeper than Buchardt E50.
Below you can see the front view size comparison of Buchardt E50 and KEF R3 in scale.
Comparison image of Buchardt E50 and KEF R3 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Buchardt E50 is approximately 539.6cm2 / 83.6inch2 and base area of the KEF R3 is approximately 670.6cm2 / 103.9inch2. The E50 requires 20% less surface area than the R3 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Buchardt E50 and KEF R3 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Buchardt E50 weighs 8.60kg / 18.9lbs and the KEF R3 weighs 13.55kg / 29.8lbs. This makes the R3 58% heavier than the E50.
Here is a comparison of how E50 and R3's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of KEF R3?
Here are the items that come with the R3:
2 Bookshelf loudspeakers2 Grilles2 Foam port plugs8 Self-adhesive rubber feetUser ManualWarranty Information
 Max Input Power |
200 watts
vs
180 watts
|
Handle more power from your amplifier |
 Low Frequency Response |
36 Hz
vs
52 Hz
|
Generates deeper bass |
 High Frequency Response |
30k Hz
vs
28k Hz
|
Generates higher frequency |
 Passive Radiator |
two 6-inch
vs
None
|
Increases the bass performance |
 Height |
395mm
vs
423mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
539cm2 (190x284mm)
vs
670cm2 (199x337mm)
|
Takes less floor space |
 Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
 Sensitivity |
87 dB
vs
85 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
 Price per pair* |
2200USD
vs
3950USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Buchardt E50 |
KEF R3 |
| Brand |
Buchardt |
KEF |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
60-200 watts |
15-180 watts |
| Sensitivity |
85 dB |
87 dB |
| Impedance |
4 ohms |
8 ohms |
| Impedance |
n/a |
3.2 ohms |
| Frequency Response |
36-30k HZ |
52-28k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
PURIFI Extended Stroke |
Hybrid aluminum |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
waveguide |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
5" |
| Crossover Frequency |
2000Hz |
400Hz and 2900Hz |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
395.0mm (15.6") |
423.0mm (16.7") |
| Width |
190.0mm (7.5") |
199.0mm (7.8") |
| Depth |
284.0mm (11.2") |
337.0mm (13.3") |
| Weight |
8.60kg (18.9lbs) |
13.55kg (29.8lbs) |
| Enclosure |
Passive Radiator |
Bass Reflex |
| Finish |
19 & 28mm (front baffle) solid european wood |
MDF/Lacquer |
| Available Colors |
Stained Black, Rounded Natural Oak, Smoked Natural Oak, Rounded Charcoal, Smoked Oak, Natural Oak |
Black Gloss, White Gloss, Walnut |
| Mounting Bracket |
No |
No |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
n/a |
Yes |
Other |
|
|
| Parts Warranty |
10 years |
5 Years |
| Labor Warranty |
10 years |
5 Years |