In this review, we will be comparing A10 and Focus 20 XD, two Powered Bookshelf speakers from Buchardt and Dynaudio. Being Powered speakers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features
of Buchardt A10 and Dynaudio Focus 20 XD first before getting into our more
detailed comparison.
In the following sections, we will get into more detail in order to better understand how the Buchardt A10 and Dynaudio Focus 20 XD compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both A10 and Focus 20 XD are 2-way speakers.
| Driver |
Buchardt A10 |
Dynaudio Focus 20 XD |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
0.74-inch
|
1.1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 6.7-inch
|
A10 features a 0.74" Aluminum Dome with waveguide Tweeter and 1 x 6.5" paper Woofer with a Crossover frequency at 2800Hz. On the other hand, the Focus 20 XD features a 1.1" Coated-Silk Soft-Dome Tweeter and 1 x 6.7" Magnesium Silicate Polymer Woofer .
Frequency Response
A10 has a frequency range of 28-40k Hz whereas Focus 20 XD has a frequency range of 39-24k Hz. With a minimum frequency of 28Hz, the A10 can go significantly deeper on the low side and provide stronger bass compared to the Focus 20 XD's min frequency of 39Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Cabinet Type and Port Position
A10 has a front firing port whereas Focus 20 XD has a rear firing ports. Buchardt A10's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Dynaudio Focus 20 XD with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Buchardt A10's and Dynaudio Focus 20 XD's external dimensions. Buchardt A10 has external dimensions of 370 x 180.0 x 245.0mm ( 14.6 x 7 x 11inch) whereas Dynaudio Focus 20 XD has external dimensions of 362.0 x 198.4 x 308.0mm ( 14.25 x 7.8125 x 12.125inch) .
Buchardt A10 is 18.4mm narrower and 63mm less deeper than Dynaudio Focus 20 XD but it is also 8mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Buchardt A10 is approximately 441.0cm2 / 68.4inch2 and base area of the Dynaudio Focus 20 XD is approximately 611.1cm2 / 94.7inch2. The A10 requires 28% less surface area than the Focus 20 XD which gives it a small advantage on placement in tight spaces.
What's in the Box of Dynaudio Focus 20 XD?
Here are the items that come with the Focus 20 XD:
2 Powered loudspeakers2 AC power cordsRemote controlSetup Manual