In this review, we will be comparing two different type of speakers by Buchardt. Buchardt A700 is a Floor-standing speaker whereas the A10 is a Bookshelf speaker.
Let's have a brief look at the main features
of Buchardt A700 and Buchardt A10 first before getting into our more
detailed comparison.
A700 and A10 are members of Buchardt's Active series of speakers. Below you can find the loudspeakers from this series.
In the following sections, we will get into more detail in order to better understand how the Buchardt A700 and Buchardt A10 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that A700 is a 3-way design whereas the A10 is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Buchardt A700 |
Buchardt A10 |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
0.74-inch
|
0.74-inch
|
|
Midrange
|
1 x 6-inch |
- |
|
Woofer
|
4 x 6-inch
|
1 x 6.5-inch
|
A700 features a 0.74" fine weave soft fabric textile aluminum waveguide Tweeter , a 6" Midrange and 4 x 6" paper Woofer with a Crossover frequency at 100-250Hz and 2800Hz. On the other hand, the A10 features a 0.74" Aluminum Dome with waveguide Tweeter and 1 x 6.5" paper Woofer with a Crossover frequency at 2800Hz.
Frequency Response
A700 has a frequency range of 17-40k Hz whereas A10 has a frequency range of 28-40k Hz. With a minimum frequency of 17Hz, the A700 can go significantly deeper on the low side and provide stronger bass compared to the A10's min frequency of 28Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Buchardt A700's and Buchardt A10's external dimensions. Buchardt A700 has external dimensions of 1000.0 x 180.0 x 280.0mm ( 40.0 x 7 x 11inch) whereas Buchardt A10 has external dimensions of 370 x 180.0 x 245.0mm ( 14.6 x 7 x 11inch) .
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Buchardt A700 is approximately 504.0cm2 / 78.1inch2 and base area of the Buchardt A10 is approximately 441.0cm2 / 68.4inch2. The A700 requires 14% more surface area than the A10 which gives it a small disadvantage on placement in tight spaces.