In this review, we will be comparing A500 and Focus 20 XD, two Powered Bookshelf speakers from Buchardt and Dynaudio. Being Powered speakers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features
of Buchardt A500 and Dynaudio Focus 20 XD first before getting into our more
detailed comparison.
Buchardt A500 Key Specs
- 3-way Design
- 450-watt RMS( 1320-watt Peak) Integrated Amplifier
- 0.74" aluminum waveguide Tweeter
- 6" Midrange
- 6" paper Woofer
- 25-40k Hz Frequency Response
- 24-bit Max Depth / 192kHZ Max Sample Rate
- Weight:9.00kg
- Dimensions (H x W x D): 365.0" x 7" x 11"( 365.0 x 180.0 x 280.0mm )
Dynaudio Focus 20 XD Key Specs
- 2-way Design
- 300-watt RMS Integrated Amplifier
- 1.1" Soft-Dome Tweeter
- 6.7" Magnesium Silicate Polymer Woofer
- 39-24k Hz Frequency Response
- 24-bit Max Depth / 192 kHz Max Sample Rate
- Dimensions (H x W x D): 362.0" x 7.8125" x 12.125"( 362.0 x 198.4 x 308.0mm )
In the following sections, we will get into more detail in order to better understand how the Buchardt A500 and Dynaudio Focus 20 XD compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that A500 is a 3-way design whereas the Focus 20 XD is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Buchardt A500 |
Dynaudio Focus 20 XD |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
0.74-inch
|
1.1-inch
|
|
Midrange
|
1 x 6-inch |
- |
|
Woofer
|
1 x 6-inch
|
1 x 6.7-inch
|
A500 features a 0.74" fine weave soft fabric textile aluminum waveguide Tweeter , a 6" Midrange and 1 x 6" paper Woofer with a Crossover frequency at 150Hz and 1800Hz. On the other hand, the Focus 20 XD features a 1.1" Coated-Silk Soft-Dome Tweeter and 1 x 6.7" Magnesium Silicate Polymer Woofer .
Frequency Response
A500 has a frequency range of 25-40k Hz whereas Focus 20 XD has a frequency range of 39-24k Hz. With a minimum frequency of 25Hz, the A500 can go significantly deeper on the low side and provide stronger bass compared to the Focus 20 XD's min frequency of 39Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Buchardt A500's and Dynaudio Focus 20 XD's external dimensions. Buchardt A500 has external dimensions of 365.0 x 180.0 x 280.0mm ( 14.4 x 7 x 11inch) whereas Dynaudio Focus 20 XD has external dimensions of 362.0 x 198.4 x 308.0mm ( 14.25 x 7.8125 x 12.125inch) .
Buchardt A500 is 18.4mm narrower and 28mm less deeper than Dynaudio Focus 20 XD but it is also 3mm taller.
Below you can see the front view size comparison of Buchardt A500 and Dynaudio Focus 20 XD in scale.
Comparison image of Buchardt A500 and Dynaudio Focus 20 XD Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Buchardt A500 is approximately 504.0cm2 / 78.1inch2 and base area of the Dynaudio Focus 20 XD is approximately 611.1cm2 / 94.7inch2. The A500 requires 18% less surface area than the Focus 20 XD which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Buchardt A500 and Dynaudio Focus 20 XD on a Media Console
What's in the Box of Dynaudio Focus 20 XD?
Here are the items that come with the Focus 20 XD:
2 Powered loudspeakers2 AC power cordsRemote controlSetup Manual
Driver Setup 
Low Frequency Response 
High Frequency Response 
Base Surface Area 
Price per pair* 
USB Port 
XLR Connection 
Subwoofer Output 
Handheld Remote 
Height 
RCA Connection 
Digital Input