In this review, we will be comparing two different types of speakers. Bowers & Wilkins 802 D5 is a Floor-standing speaker whereas the LINTON Heritage is a Bookshelf speaker.
Let's have a brief look at the main features
of Bowers & Wilkins 802 D5 and Wharfedale LINTON first before getting into our more
detailed comparison.
| Key Specs | Bowers & Wilkins 802 D5 | Wharfedale LINTON |
|---|
| Brand | Bowers Wilkins United Kingdom · founded 1966 | Wharfedale United Kingdom · founded 1932 |
|---|
| Design | 3-way | 3-way |
|---|
| Tweeter | 1" Diamond dome | 1" Soft-dome |
|---|
| Midrange | 6" | 5" |
|---|
| Woofer | 2 x 8" Aerofoil | 8" Woven Kevlar |
|---|
| Frequency response | 17-28k Hz | 40-20k Hz |
|---|
| Sensitivity | 90 dB | 90 dB |
|---|
| Impedance | 8 ohms | 6 ohms |
|---|
| Power range | 50-1000 watts | 25-200 watts |
|---|
| Weight | 91.40kg / 201.1lbs | 18.40kg / 40.5lbs |
|---|
| Dimensions (H x W x D) | 47-15/16" x 16-1/4" x 23-3/16" 1218.0 x 413.0 x 589.0mm | 22.2" x 11.8" x 14.2" 565.0 x 300.0 x 360.0mm |
|---|
What size room are the Bowers & Wilkins 802 D5 and Wharfedale LINTON speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Bowers & Wilkins 802 D5 |
Wharfedale LINTON |
| Near-field |
Are you nuts? |
Poor |
| Small Room |
Poor |
Average |
| Mid-size Room |
Average |
Good |
| Large Room |
Good |
Average |
| Very Large Room |
Good |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both 802 D5 and LINTON Heritage are 3-way speakers.
Bowers & Wilkins 802 D5Wharfedale LINTON
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Bowers & Wilkins 802 D5 |
Wharfedale LINTON |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 6-inch |
1 x 5-inch |
|
Woofer
|
2 x 8-inch
|
1 x 8-inch
|
802 D5 features a 1" Diamond Diamond dome Tweeter, a 6" Midrange and 2 x 8" Aerofoil Woofer. On the other hand, the LINTON Heritage features a 1" woven textile Soft-dome Tweeter, a 5" Midrange and 1 x 8" Woven Kevlar Woofer with a Crossover frequency at 630Hz and 2400Hz.
Frequency Response
802 D5 has a frequency range of 17-28k Hz whereas LINTON Heritage has a frequency range of 40-20k Hz. With a minimum frequency of 17Hz, the 802 D5 can go significantly deeper on the low side and provide stronger bass compared to the LINTON Heritage's min frequency of 40Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Impedance and Sensitivity
802 D5 is a 8 ohms speaker compared to the LINTON Heritage which has a nominal impedance of 6 ohms.
On the other hand, they have the same sensitivity of 90 dBdB.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
802 D5 can handle a max power of 1000 watts RMS, whereas LINTON Heritage has a max power handling value of 200 watts RMS, 800 watts less than the 802 D5.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Both 802 D5 and LINTON Heritage features dual binding post speaker terminals for bi-amping or bi-wiring.
Wharfedale LINTON's Post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both 802 D5 and LINTON Heritage have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Bowers & Wilkins 802 D5's and Wharfedale LINTON's external dimensions. Bowers & Wilkins 802 D5 has external dimensions of 1218.0 x 413.0 x 589.0mm (47-15/16 x 16-1/4 x 23-3/16inch) whereas Wharfedale LINTON has external dimensions of 565.0 x 300.0 x 360.0mm (22.2 x 11.8 x 12.9inch).
Bowers & Wilkins 802 D5 is clearly the larger of the two speakers. Its body is 113mm wider, 653mm taller and 229mm deeper than Wharfedale LINTON.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Bowers & Wilkins 802 D5 needs about 125% more floor or shelf area. Bowers & Wilkins 802 D5 is 229mm deeper, so it stands that much further out from the wall. Bowers & Wilkins 802 D5 is 653mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Bowers & Wilkins 802 D5 is approximately 2432.6cm2 / 377.1inch2 and base area of the Wharfedale LINTON is approximately 1080.0cm2 / 167.4inch2. The 802 D5 requires 125% more surface area than the LINTON Heritage which gives it a small disadvantage on placement in tight spaces.
What's in the Box of Wharfedale LINTON?
Here are the items that come with the LINTON Heritage:
- Bookshelf loudspeaker
- Grille (pre-installed)
- 4 Self-adhesive rubber feet
- Pair of white gloves
- User's Manual