In this review, we will be comparing 702 S3 and Aria 936, two Passive Floor-standing speakers from Bowers Wilkins and Focal.
Let's have a brief look at the main features
of B&W 702 S3 and Focal Aria 936 first before getting into our more
detailed comparison.
| Key Specs | B&W 702 S3 | Focal Aria 936 |
|---|
| Brand | Bowers Wilkins
United Kingdom · founded 1966 | Focal
France · founded 1979 |
|---|
| Design | 3-way | 3-way |
|---|
| Tweeter | 1" | 1" inverted dome |
|---|
| Midrange | 6" | 6.5" |
|---|
| Woofer | 3 x 6.5" Aerofoil | 3 x 6.5" Flax |
|---|
| Frequency response | 46-28k Hz | 39-28k Hz |
|---|
| Sensitivity | 90 dB | 92 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Power range | 30-300 watts | 50-300 watts |
|---|
| Weight | 33.46kg / 73.6lbs | 29.09kg / 64lbs |
|---|
| Dimensions (H x W x D) | 44.8" x 7.6" x 15.4"
1138.0 x 192.0 x 391.0mm | 45-3/16" x 11-9/16" x 14-11/16"
1148.0 x 294.0 x 374.0mm |
|---|
What size room are the B&W 702 S3 and Focal Aria 936 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
B&W 702 S3 |
Focal Aria 936 |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both 702 S3 and Aria 936 are 3-way speakers.
B&W 702 S3Focal Aria 936
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
B&W 702 S3 |
Focal Aria 936 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 6-inch |
1 x 6.5-inch |
|
Woofer
|
3 x 6.5-inch
|
3 x 6.5-inch
|
702 S3 features a 1" Tweeter, a 6" Midrange and 3 x 6.5" Aerofoil Woofer. On the other hand, the Aria 936 features a 1" TNF Al/Mg inverted dome Tweeter, a 6.5" Midrange and 3 x 6.5" Flax Woofer with a Crossover frequency at 260Hz and 3,100Hz.
Frequency Response
702 S3 has a frequency range of 46-28k Hz whereas Aria 936 has a frequency range of 39-28k Hz. With a minimum frequency of 39Hz, the Aria 936 can go significantly deeper on the low side and provide stronger bass compared to the 702 S3's min frequency of 46Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
702 S3 and Aria 936 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. 702 S3 sensitivity is rated at 90 dB and the Aria 936's is at 92 dB. This 4 dB difference makes the Focal Aria 936 a more sensitive speaker compared to B&W 702 S3, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Both handle the same maximum of 300 watts RMS, though 702 S3 is rated 30-300 watts and Aria 936 50-300 watts.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
702 S3 features Binding post posts which make bi-amping or bi-wiring possible. Aria 936 has a Binding post which doesn't feature bi-amping/bi-wiring.
B&W 702 S3's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare B&W 702 S3's and Focal Aria 936's external dimensions. B&W 702 S3 has external dimensions of 1138.0 x 192.0 x 391.0mm (44.8-inch x 7.6-inch x 15.4-inch) whereas Focal Aria 936 has external dimensions of 1148.0 x 294.0 x 374.0mm (45-3/16 x 11-9/16 x 14-11/16inch).
B&W 702 S3 is 102mm narrower and 10mm shorter than Focal Aria 936 but it is also 17mm deeper.
Below you can see the front view size comparison of B&W 702 S3 and Focal Aria 936 in scale.
Comparison image of B&W 702 S3 and Focal Aria 936 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the B&W 702 S3 is approximately 750.7cm2 / 116.4inch2 and base area of the Focal Aria 936 is approximately 1099.6cm2 / 170.4inch2. The 702 S3 requires 32% less surface area than the Aria 936 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The B&W 702 S3 weighs 33.46kg / 73.6lbs and the Focal Aria 936 weighs 29.09kg / 64lbs. This makes the 702 S3 15% heavier than the Aria 936.
Here is a comparison of how 702 S3 and Aria 936's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of B&W 702 S3?
Here are the items that are included inside the box of 702 S3:
- Floorstanding loudspeaker
- Grille
- Plinth (base)
- 2 Jumper-straps (pre-installed)
- Two-piece foam port plug
- 4 Rubber feet
- 4 Spike feet
- 4 Lock-nuts
- 4 Screws
- 4 Washers
- 4 Lock washers
- Hex-key
- Manual
- Bowers & Wilkins brochure
- Warranty Information
What's in the Box of Focal Aria 936?
Here are the items that come with the Aria 936:
- Floorstanding loudspeaker
- Grille
- Base
- 4 Spike feet (pre-installed in base)
- 4 Plastic feet
- 4 Screws
- Allen-key
- Hex-tool
- User Manual
 Minimum Impedance |
3.1 ohms
vs
2.8 ohms
|
Very low impedance levels puts more pressure on amplifier |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Height |
1138mm
vs
1148mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
750cm2
vs
1099cm2
|
Takes less floor space |
 Sensitivity |
92 dB
vs
88 dB
|
Play louder with same amount of amplification power |
 Low Frequency Response |
39 Hz
vs
46 Hz
|
Generates deeper bass |
 Price per pair* |
5998USD
vs
6998USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Bowers & Wilkins 702 S3 |
Focal Aria 936 |
| Brand |
Bowers Wilkins |
Focal |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
30-300 watts |
50-300 watts |
| Sensitivity |
90 dB |
92 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
3.1 ohms |
2.8 ohms |
| Frequency Response |
46-28k Hz |
39-28k Hz |
Drivers |
|
|
| Woofer Quantity |
3 |
3 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
Aerofoil |
Flax |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
n/a |
inverted dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
6" |
6.5" |
| Crossover Frequency |
n/a |
260Hz and 3,100Hz |
| Firing Direction |
rear |
n/a |
Physical Specs |
|
|
| Height |
1138.0mm (44.8") |
1148.0mm (45.2") |
| Width |
192.0mm (7.6") |
294.0mm (11.6") |
| Depth |
391.0mm (15.4") |
374.0mm (14.7") |
| Weight |
33.46kg (73.6lbs) |
29.09kg (64lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Lacquer |
MDF/Glass/Leather |
| Available Colors |
Gloss Black,Satin White,Mocha,Rosenut |
Gloss Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |
A generation apart: B&W 702 S3 is the newer design, against a 2013 model. Newer is not automatically better, but the older one is more likely to be discounted or near run-out.
| Area | Better | Why |
|---|
| Bass | B | Focal Aria 936 digs deeper - 39Hz against 46Hz. A subwoofer would even that out. |
| Amplifier needs | B | Focal Aria 936 is more sensitive (92dB vs 88dB), so it goes louder on the same amplifier. |
| Headroom | evenly matched | Similar power handling (300W vs 300W). |
| Size | depends | B&W 702 S3 is easier to place; Focal Aria 936 is bigger, which usually goes with fuller bass. Your room decides. |
| Expandability | A | B&W 702 S3: bi-amping. |
| Price | B | Focal Aria 936 is cheaper - $5,998 against $6,998, about 14% less. |
A B&W 702 S3 B Focal Aria 936
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Focal Aria 936 has the edge on paper, though the margin is not large. The rows marked "depends" may matter more to you than the score does. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 46Hz anyway, so judge these on the other rows instead. In a large or open-plan room, Focal Aria 936 has the cabinet volume to fill it more easily; in a small room, near a wall or at desk distance, B&W 702 S3 is the easier speaker to get right.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.