In this review, we will be comparing 607 S2 AE and M105, two Passive Bookshelf speakers from Bowers Wilkins and Revel. Let's have a brief look at the main features
of B&W 607 S2 and Revel M105 first before getting into our more
detailed comparison.
What size room are the B&W 607 S2 and Revel M105 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the B&W 607 S2 and Revel M105 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both 607 S2 AE and M105 are 2-way speakers.
| Driver |
B&W 607 S2 |
Revel M105 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5-inch
|
1 x 5.25-inch
|
607 S2 AE features a 1" Aluminum Decoupled Double Dome Tweeter and 1 x 5" Continuum Woofer . On the other hand, the M105 features a 1" aluminum Hard-Dome with Acoustic Lens Waveguide Tweeter and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 2300Hz.
Frequency Response
607 S2 AE has a frequency range of 52-28k Hz whereas M105 has a frequency range of 60Hz- 20kHz. With a minimum frequency of 52Hz, the 607 S2 AE can go significantly deeper on the low side and provide stronger bass compared to the M105's min frequency of 60Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
607 S2 AE and M105 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. 607 S2 AE sensitivity is rated at 84 dB and the M105's is at 86 dB. This 2 dB difference makes the Revel M105 a more sensitive speaker compared to B&W 607 S2, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
607 S2 AE can handle a max power of 120 watts RMS from the amp the whereas 607 S2 AE has a max power handling value of 100 watts RMS , 20 watts less than the M105.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
607 S2 AE features Binding post posts which make bi-amping or bi-wiring possible. M105 has a Binding post which doesn't feature bi-amping/bi-wiring.
B&W 607 S2's Binding post terminals allows Bi-amping or bi-wiring
Revel M105's Binding post terminals
Cabinet Type and Port Position
Both 607 S2 AE and M105 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare B&W 607 S2's and Revel M105's external dimensions. B&W 607 S2 has external dimensions of 301.0 x 166.0 x 232.0mm ( 11-13/16 x 6-1/2 x 9-1/8inch) whereas Revel M105 has external dimensions of 359.0 x 202.0 x 251.0mm ( 14-1/8 x 7-15/16 x 9-7/8inch) .
Revel M105 is clearly the larger of the two speakers. Its body is 36mm wider, 58mm taller and 19mm deeper than B&W 607 S2.
Below you can see the front view size comparison of B&W 607 S2 and Revel M105 in scale.
Comparison image of B&W 607 S2 and Revel M105 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the B&W 607 S2 is approximately 385.1cm2 / 59.7inch2 and base area of the Revel M105 is approximately 507.0cm2 / 78.6inch2. The 607 S2 AE requires 24% less surface area than the M105 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of B&W 607 S2 and Revel M105 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The B&W 607 S2 weighs 4.70kg / 10.3lbs and the Revel M105 weighs 7.14kg / 15.7lbs. This makes the M105 52% heavier than the 607 S2 AE.
Here is a comparison of how 607 S2 AE and M105's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of B&W 607 S2?
Here are the items that are included inside the box of 607 S2 AE:
2 Bookshelf loudspeakers 2 Grilles 2 Two-piece foam port plugs 8 Self-adhesive rubber feet 4 Jumper-straps (pre-installed) Manual Bowers & Wilkins brochure Warranty Information
What's in the Box of Revel M105?
Here are the items that come with the M105:
Bookshelf loudspeakerGrilleFoam port plugOwners Manual
 Low Frequency Response |
52 Hz
vs
60 Hz
|
Generates deeper bass |
 High Frequency Response |
28k Hz
vs
20k Hz
|
Generates higher frequency |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Height |
301mm
vs
359mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
385cm2 (166x232mm)
vs
507cm2 (202x251mm)
|
Takes less floor space |
 Price per pair* |
799USD
vs
1650USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
120 watts
vs
100 watts
|
Handle more power from your amplifier |
 Sensitivity |
86 dB
vs
84 dB
|
Play louder with same amount of amplification power |
| Woofer Size |
5.25 inches
vs
5 inches
|
Larger woofer |
| General |
Bowers & Wilkins 607 S2 Anniversary Edition |
Revel Performa3 M105 |
| Brand |
Bowers Wilkins |
Revel |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
30-100 watts |
50-120 watts |
| Sensitivity |
84 dB |
86 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
3.0 ohms |
n/a |
| Frequency Response |
52-28k Hz |
60Hz- 20kHz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5" |
5.25" |
| Woofer Composition |
Continuum |
Aluminum |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Decoupled Double Dome |
Hard-Dome with Acoustic Lens Waveguide |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
2300Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
301.0mm (11.9") |
359.0mm (14.1") |
| Width |
166.0mm (6.5") |
202.0mm (8") |
| Depth |
232.0mm (9.1") |
251.0mm (9.9") |
| Weight |
4.70kg (10.3lbs) |
7.14kg (15.7lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Vinyl |
Wood/Lacquer |
| Available Colors |
Matte Black, Matte White, Oak, Red Cherry |
Gloss Walnut,Piano Black,Piano White |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
24-26" |
24-25" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |