In this review, we will be comparing 607 S2 AE and LS50 Meta, two Passive Bookshelf speakers from Bowers Wilkins and KEF. Let's have a brief look at the main features
of B&W 607 S2 and KEF LS50 Meta first before getting into our more
detailed comparison.
What size room are the B&W 607 S2 and KEF LS50 Meta speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the B&W 607 S2 and KEF LS50 Meta compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both 607 S2 AE and LS50 Meta are 2-way speakers.
| Driver |
B&W 607 S2 |
KEF LS50 Meta |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5-inch
|
1 x 5.25-inch
|
607 S2 AE features a 1" Aluminum Decoupled Double Dome Tweeter and 1 x 5" Continuum Woofer . On the other hand, the LS50 Meta features a 1" Aluminum Hard-Dome Tweeter and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 2100Hz.
Frequency Response
607 S2 AE has a frequency range of 52-28k Hz whereas LS50 Meta has a frequency range of 79-28k Hz. With a minimum frequency of 52Hz, the 607 S2 AE can go significantly deeper on the low side and provide stronger bass compared to the LS50 Meta's min frequency of 79Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
607 S2 AE and LS50 Meta have the same Impedance of 8 ohms but where they differ is the sensitivity levels. 607 S2 AE sensitivity is rated at 84 dB and the LS50 Meta's is at 85 dB. This 1 dB difference makes the KEF LS50 Meta a more sensitive speaker compared to B&W 607 S2, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
607 S2 AE features Binding post posts which make bi-amping or bi-wiring possible. LS50 Meta has a Post which doesn't feature bi-amping/bi-wiring.
B&W 607 S2's Binding post terminals allows Bi-amping or bi-wiring
KEF LS50 Meta's Post terminals
Cabinet Type and Port Position
Both 607 S2 AE and LS50 Meta have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare B&W 607 S2's and KEF LS50 Meta's external dimensions. B&W 607 S2 has external dimensions of 301.0 x 166.0 x 232.0mm ( 11-13/16 x 6-1/2 x 9-1/8inch) whereas KEF LS50 Meta has external dimensions of 303.0 x 201.0 x 281.0mm ( 11-15/16 x 7.875 x 11-1/16inch) .
KEF LS50 Meta is clearly the larger of the two speakers. Its body is 35mm wider, 2mm taller and 49mm deeper than B&W 607 S2.
Below you can see the front view size comparison of B&W 607 S2 and KEF LS50 Meta in scale.
Comparison image of B&W 607 S2 and KEF LS50 Meta Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the B&W 607 S2 is approximately 385.1cm2 / 59.7inch2 and base area of the KEF LS50 Meta is approximately 564.8cm2 / 87.5inch2. The 607 S2 AE requires 32% less surface area than the LS50 Meta which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of B&W 607 S2 and KEF LS50 Meta on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The B&W 607 S2 weighs 4.70kg / 10.3lbs and the KEF LS50 Meta weighs 7.82kg / 17.2lbs. This makes the LS50 Meta 66% heavier than the 607 S2 AE.
Here is a comparison of how 607 S2 AE and LS50 Meta's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of B&W 607 S2?
Here are the items that are included inside the box of 607 S2 AE:
2 Bookshelf loudspeakers 2 Grilles 2 Two-piece foam port plugs 8 Self-adhesive rubber feet 4 Jumper-straps (pre-installed) Manual Bowers & Wilkins brochure Warranty Information
What's in the Box of KEF LS50 Meta?
Here are the items that come with the LS50 Meta:
2 Bookshelf loudspeakers2 Foam port plugs8 Self-adhesive rubber feetOwners ManualWarranty Registration Card
 Low Frequency Response |
52 Hz
vs
79 Hz
|
Generates deeper bass |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Height |
301mm
vs
303mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
385cm2 (166x232mm)
vs
564cm2 (201x281mm)
|
Takes less floor space |
 Price per pair* |
799USD
vs
1600USD
|
costs less (*prices may change depending on the seller, location and time) |
 Sensitivity |
85 dB
vs
84 dB
|
Play louder with same amount of amplification power |
 Minimum Impedance |
3.5 ohms
vs
3.0 ohms
|
Very low impedance levels puts more pressure on amplifier |
| Woofer Size |
5.25 inches
vs
5 inches
|
Larger woofer |
| General |
Bowers & Wilkins 607 S2 Anniversary Edition |
KEF LS50 Meta |
| Brand |
Bowers Wilkins |
KEF |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
30-100 watts |
40-100 watts |
| Sensitivity |
84 dB |
85 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
3.0 ohms |
3.5 ohms |
| Frequency Response |
52-28k Hz |
79-28k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5" |
5.25" |
| Woofer Composition |
Continuum |
Aluminum |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Decoupled Double Dome |
Hard-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
2100Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
301.0mm (11.9") |
303.0mm (11.9") |
| Width |
166.0mm (6.5") |
201.0mm (7.9") |
| Depth |
232.0mm (9.1") |
281.0mm (11.1") |
| Weight |
4.70kg (10.3lbs) |
7.82kg (17.2lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Vinyl |
MDF/Polymer |
| Available Colors |
Matte Black, Matte White, Oak, Red Cherry |
Carbon Black,Titanium Grey,Royal Blue,Mineral White |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
24-26" |
25-30" |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |