In this review, we will be comparing 606 S3 and Opticon 2 MK2, two Passive Bookshelf speakers from Bowers Wilkins and DALI. Let's have a brief look at the main features
of B&W 606 S3 and DALI Opticon 2 II first before getting into our more
detailed comparison.
What size room are the B&W 606 S3 and DALI Opticon 2 II speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the B&W 606 S3 and DALI Opticon 2 II compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both 606 S3 and Opticon 2 MK2 are 2-way speakers.
| Driver |
B&W 606 S3 |
DALI Opticon 2 II |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1.125-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 6.5-inch
|
606 S3 features a 1" Titanium Decoupled Double Dome Titanium Tweeter and 1 x 6.5" Continuum Woofer . On the other hand, the Opticon 2 MK2 features a 1.125" Soft-Dome Tweeter and 1 x 6.5" Wood Fiber Woofer with a Crossover frequency at 2000Hz.
Frequency Response
606 S3 has a frequency range of 52-28k Hz whereas Opticon 2 MK2 has a frequency range of 59-25k Hz. With a minimum frequency of 52Hz, the 606 S3 can go significantly deeper on the low side and provide stronger bass compared to the Opticon 2 MK2's min frequency of 59Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
606 S3 is a 8 ohms speaker compared to the Opticon 2 MK2 which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Opticon 2 MK2 can provide this impedance level.
These two speakers also have different sensitivity levels. 606 S3 sensitivity is rated at 88 dB and the Opticon 2 MK2's is rated at 86.5 dB. This 1 dB difference makes the B&W 606 S3 a more sensitive speaker compared to DALI Opticon 2 II, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
606 S3 can handle a max power of 150 watts RMS from the amp the whereas 606 S3 has a max power handling value of 120 watts RMS , 30 watts less than the Opticon 2 MK2.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
606 S3 features Binding post posts which make bi-amping or bi-wiring possible. Opticon 2 MK2 has a Post which doesn't feature bi-amping/bi-wiring.
B&W 606 S3's Binding post terminals allows Bi-amping or bi-wiring
DALI Opticon 2 II's Post terminals
Cabinet Type and Port Position
Both 606 S3 and Opticon 2 MK2 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
DALI Opticon 2 II Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare B&W 606 S3's and DALI Opticon 2 II's external dimensions. B&W 606 S3 has external dimensions of 344.0 x 189.0 x 328.0mm ( 13.6 x 7.4 x 12.9inch) whereas DALI Opticon 2 II has external dimensions of 351.0 x 196.0 x 297.0mm ( 13-13/16 x 7-11/16 x 11-11/16inch) .
B&W 606 S3 is 7mm narrower and 7mm shorter than DALI Opticon 2 II but it is also 31mm deeper.
Below you can see the front view size comparison of B&W 606 S3 and DALI Opticon 2 II in scale.
Comparison image of B&W 606 S3 and DALI Opticon 2 II Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the B&W 606 S3 is approximately 619.9cm2 / 96.1inch2 and base area of the DALI Opticon 2 II is approximately 582.1cm2 / 90.2inch2. The 606 S3 requires 6% more surface area than the Opticon 2 MK2 which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of B&W 606 S3 and DALI Opticon 2 II on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The B&W 606 S3 weighs 7.05kg / 15.5lbs and the DALI Opticon 2 II weighs 7.73kg / 17lbs. This makes the Opticon 2 MK2 10% heavier than the 606 S3.
Here is a comparison of how 606 S3 and Opticon 2 MK2's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of B&W 606 S3?
Here are the items that are included inside the box of 606 S3:
2 Bookshelf loudspeakers 2 Grilles 2 Two-piece foam port plugs 8 Self-adhesive rubber feet 4 Jumper-straps (pre-installed) Manual Bowers & Wilkins brochure Warranty Information
What's in the Box of DALI Opticon 2 II?
Here are the items that come with the Opticon 2 MK2:
Bookshelf loudspeakerGrille4 Rubber feetQuick Start GuideCongratulations Card
 Sensitivity |
88 dB
vs
87 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
4 ohms
|
Less selective with amplifiers |
 Low Frequency Response |
52 Hz
vs
59 Hz
|
Generates deeper bass |
 High Frequency Response |
28k Hz
vs
25k Hz
|
Generates higher frequency |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Height |
344mm
vs
351mm
|
Easier to fit in smaller spaces |
 Price per pair* |
1100USD
vs
1500USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
150 watts
vs
120 watts
|
Handle more power from your amplifier |
 Base Surface Area |
582cm2 (196x297mm)
vs
619cm2 (189x328mm)
|
Takes less floor space |
| General |
Bowers & Wilkins 606 S3 |
DALI Opticon 2 MK2 |
| Brand |
Bowers Wilkins |
DALI |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
30-120 watts |
30-150 watts |
| Sensitivity |
88 dB |
86.5 dB |
| Impedance |
8 ohms |
4 ohms |
| Impedance |
3.7 ohms |
n/a |
| Frequency Response |
52-28k Hz |
59-25k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6.5" |
6.5" |
| Woofer Composition |
Continuum |
Wood Fiber |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1.125" |
| Tweeter Type |
Decoupled Double Dome Titanium |
Soft-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
2000Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
344.0mm (13.5") |
351.0mm (13.8") |
| Width |
189.0mm (7.4") |
196.0mm (7.7") |
| Depth |
328.0mm (12.9") |
297.0mm (11.7") |
| Weight |
7.05kg (15.5lbs) |
7.73kg (17lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Matte Black, Matte White, Oak, Red Cherry |
Satin Black, Tobacco Oak, Satin White |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
24-26" |
24-26" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |