In this review, we will be comparing 603 S2 AE and BW 603, two Passive Floor-standing speakers by Bowers Wilkins Let's have a brief look at the main features
of B&W 603 S2 and B&W 603 first before getting into our more
detailed comparison.
B&W 603 S2 Key Specs
- 3-way Design
- 1" Tweeter
- 6" Midrange
- 2 x 6.5" Paper Woofer
- 48-28k Hz Frequency Response
- 88.5 dB Sensitivity
- Impedance: 8ohms
- Power Range:30-200watts
- Weight:24.10kg
- Dimensions (H x W x D): 1055.0" x 7-1/2" x 14-5/8"( 1055.0 x 190.0 x 372.0mm )
B&W 603 Key Specs
- 3-way Design
- 1" Tweeter
- 6" Midrange
- 2 x 6.5" Paper Woofer
- 6" Midrange
- 48-28k Hz Frequency Response
- 88.5 dB Sensitivity
- Impedance: 8ohms
- Power Range:30-200watts
- Weight:24.14kg
- Dimensions (H x W x D): 985.0" x 7.4" x 13.3"( 985.0 x 190.0 x 340.0mm )
What size room are the B&W 603 S2 and B&W 603 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
B&W 603 S2 |
B&W 603 |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Good |
Good |
| Large Room |
Good |
Good |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the B&W 603 S2 and B&W 603 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both 603 S2 AE and BW 603 are 3-way speakers.
| Driver |
B&W 603 S2 |
B&W 603 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 6-inch |
1 x 6-inch |
|
Woofer
|
2 x 6.5-inch
|
2 x 6.5-inch
|
603 S2 AE features a 1" Tweeter , a 6" Midrange and 2 x 6.5" Paper Woofer . On the other hand, the BW 603 features a 1" Tweeter , a 6" Midrange and 2 x 6.5" Paper Woofer .
Frequency Response
603 S2 AE and BW 603 has exactly the same frequency range of 48-28k Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
603 S2 AE and BW 603 have the same Impedance of 8 ohms and their sensitivity is also same at 89 dB.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
603 S2 AE and BW 603 has the same power range of 30-200 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both 603 S2 AE and BW 603 features dual binding post speaker terminals for bi-amping or bi-wiring.
B&W 603 S2's Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both 603 S2 AE and BW 603 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare B&W 603 S2's and B&W 603's external dimensions. B&W 603 S2 has external dimensions of 1055.0 x 190.0 x 372.0mm ( 41-1/2 x 12-5/8 x 14-5/8inch) whereas B&W 603 has external dimensions of 985.0 x 190.0 x 340.0mm ( 38.7 x 7.4 x 13.3inch) .
Below you can see the front view size comparison of B&W 603 S2 and B&W 603 in scale.
Comparison image of B&W 603 S2 and B&W 603 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the B&W 603 S2 is approximately 706.8cm2 / 109.6inch2 and base area of the B&W 603 is approximately 646.0cm2 / 100.1inch2. The 603 S2 AE requires 9% more surface area than the BW 603 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The B&W 603 S2 weighs 24.10kg / 53lbs and the B&W 603 weighs 24.14kg / 53.1lbs. This makes the BW 603 0% heavier than the 603 S2 AE.
Here is a comparison of how 603 S2 AE and BW 603's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of B&W 603 S2?
Here are the items that are included inside the box of 603 S2 AE:
Floorstanding loudspeakerGrillePlinith (base)2 Jumper-straps (pre-installed)4 Rubber feet4 Spike feet4 Hex-nuts4 Screws4 Washers4 Lock-washersTwo-piece foam port plugHex-keyManualBowers & Wilkins brochureWarranty Information
What's in the Box of B&W 603?
Here are the items that come with the BW 603:
Floorstanding loudspeaker Grille Plinith (base) 2 Jumper-straps (pre-installed) 4 Rubber feet 4 Spike feet 4 Hex-nuts 4 Screws 4 Washers 4 Lock-washers Two-piece foam port plug Hex-key Manual Bowers & Wilkins brochure Warranty Information