In this review, we will be comparing HD5 and R-41PM, two Powered Bookshelf speakers from Audioengine and Klipsch. Being Powered speakers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features
of Audioengine HD5 and Klipsch R-41PM first before getting into our more
detailed comparison.
Audioengine HD5 Key Specs
- 2-way Design
- 100-watt RMS( 150-watt Peak) Integrated Amplifier
- 0.75" Soft-Dome Tweeter
- 5" Aramid Woofer
- 55-22k Hz Frequency Response
- 24-bit Max Depth / 192 kHz Max Sample Rate
- Built-in 5.0 Bluetooth
- Weight:5.70kg
- Dimensions (H x W x D): 283.0" x 7.1875" x 10.4375"( 283.0 x 183.0 x 266.0mm )
Klipsch R-41PM Key Specs
- 2-way Design
- 70-watt RMS( 140-watt Peak) Integrated Amplifier
- 1.0" Tractrix Horn Tweeter
- 4.0" Copper-spun IMG Woofer
- 76-21k Hz Frequency Response
- 24-bit Max Depth / 96 kHz Max Sample Rate
- Built-in 3.0 Bluetooth
- Weight:3.70kg
- Dimensions (H x W x D): 281.0" x 5.8125" x 9.5"( 281.0 x 147.6 x 241.3mm )
In the following sections, we will get into more detail in order to better understand how the Audioengine HD5 and Klipsch R-41PM compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both HD5 and R-41PM are 2-way speakers.
| Driver |
Audioengine HD5 |
Klipsch R-41PM |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
0.75-inch
|
1.0-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5-inch
|
1 x 4.0-inch
|
HD5 features a 0.75" Silk Soft-Dome Tweeter and 1 x 5" Aramid Woofer . On the other hand, the R-41PM features a 1.0" Aluminum LTS Tractrix Horn Tweeter and 1 x 4.0" Copper-spun IMG Woofer with a Crossover frequency at 1770Hz.
Frequency Response
HD5 has a frequency range of 55-22k Hz whereas R-41PM has a frequency range of 76-21k Hz. With a minimum frequency of 55Hz, the HD5 can go significantly deeper on the low side and provide stronger bass compared to the R-41PM's min frequency of 76Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Cabinet Type and Port Position
Both HD5 and R-41PM have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Audioengine HD5's and Klipsch R-41PM's external dimensions. Audioengine HD5 has external dimensions of 283.0 x 183.0 x 266.0mm ( 11.125inch x 7.1875inch x 10.4375inch ) whereas Klipsch R-41PM has external dimensions of 281.0 x 147.6 x 241.3mm ( 11.0625 x 5.8125 x 9.5inch) .
Audioengine HD5 is clearly the larger of the two speakers. Its body is 35.4mm wider, 2mm taller and 24.7mm deeper than Klipsch R-41PM.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Audioengine HD5 is approximately 486.8cm2 / 75.5inch2 and base area of the Klipsch R-41PM is approximately 356.2cm2 / 55.2inch2. The HD5 requires 37% more surface area than the R-41PM which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Audioengine HD5 weighs 5.70kg / 12.5lbs and the Klipsch R-41PM weighs 3.70kg / 8.1lbs. This makes the HD5 54% heavier than the R-41PM.
Here is a comparison of how HD5 and R-41PM's weights compare with the average, max and min weights in Powered Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Audioengine HD5?
Here are the items that are included inside the box of HD5:
Powered speakerPassive speaker2 Grilles (pre-installed)6-feet AC power cordRemote control (CR2025 battery installed)Bluetooth antenna13-feet Speaker cable (banana connectors on each end)5-feet Stereo minijack cable6-feet Stereo RCA cable2 Microfiber speaker bagsMIcrofiber cable bagQuickstart GuideBrochure
What's in the Box of Klipsch R-41PM?
Here are the items that come with the R-41PM:
Powered speaker (right)Passive speaker (left)2 Grilles68-inch AC power cordRemote control2