In this review, we will be comparing two different type of speakers by Acoustic Energy. Acoustic Energy AE520 is a Floor-standing speaker whereas the AE500 is a Bookshelf speaker.
Let's have a brief look at the main features
of AE520 and AE500 first before getting into our more
detailed comparison.
AE520 Key Specs
- 3-way Design
- 1" dome with waveguide Tweeter
- 5.2" Midrange
- 4 x 5" carbon fibre cone Woofer
- 30Hz - 28kHz Frequency Response
- 90 dB Sensitivity
- Impedance: 6ohms
- Power Range:up to 300watts
- Weight:30.00kg
- Dimensions (H x W x D): 1130.0" x 7.3" x 12.6"( 1130.0 x 185.0 x 320.0mm )
AE500 Key Specs
- 2-way Design
- 1" dome with waveguide Tweeter
- 5" carbon fibre cone Woofer
- 45Hz - 28kHz Frequency Response
- 87 dB Sensitivity
- Impedance: 6ohms
- Power Range:up to 120watts
- Weight:8.00kg
- Dimensions (H x W x D): 310.0" x 7.3" x 10.2"( 310.0 x 185.0 x 260.0mm )
AE520 and AE500 are members of Acoustic Energy's AE500 series of speakers. Below you can find the loudspeakers from this series.
What size room are the AE520 and AE500 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
AE520 |
AE500 |
| Near-field |
Bad |
Average |
| Small Room |
Poor |
Good |
| Mid-size Room |
Average |
Average |
| Large Room |
Good |
Poor |
| Very Large Room |
Average |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the AE520 and AE500 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that AE520 is a 3-way design whereas the AE500 is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
AE520 |
AE500 |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 5.2-inch |
- |
|
Woofer
|
4 x 5-inch
|
1 x 5-inch
|
AE520 features a 1" carbon fibre dome with waveguide Tweeter , a 5.2" Midrange and 4 x 5" carbon fibre cone Woofer with a Crossover frequency at 373Hz and 2.8kHz. On the other hand, the AE500 features a 1" carbon fibre dome with waveguide Tweeter and 1 x 5" carbon fibre cone Woofer with a Crossover frequency at 2800Hz.
Frequency Response
AE520 has a frequency range of 30Hz - 28kHz whereas AE500 has a frequency range of 45Hz - 28kHz. With a minimum frequency of 30Hz, the AE520 can go significantly deeper on the low side and provide stronger bass compared to the AE500's min frequency of 45Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
AE520 and AE500 have the same Impedance of 6 ohms but where they differ is the sensitivity levels. AE520 sensitivity is rated at 90 dB and the AE500's is at 87 dB. This 3 dB difference makes the AE520 a more sensitive speaker compared to AE500, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
AE520 can handle a max power of 300 watts RMS from the amp the whereas AE500 has a max power handling value of 100 watts RMS, 200 watts less than the AE520.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Cabinet Type and Port Position
Both AE520 and AE500 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare AE520's and AE500's external dimensions. AE520 has external dimensions of 1130.0 x 185.0 x 320.0mm ( 44.5 x 7.3 x 12.6inch) whereas AE500 has external dimensions of 310.0 x 185.0 x 260.0mm ( 12.2 x 7.3 x 10.2inch) .
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the AE520 is approximately 592.0cm2 / 91.8inch2 and base area of the AE500 is approximately 481.0cm2 / 74.6inch2. The AE520 requires 23% more surface area than the AE500 which gives it a small disadvantage on placement in tight spaces.
Max Input Power 
Driver Setup 
Sensitivity 
Number of Woofers 
Height 
Base Surface Area 
Price per pair*