In this review, we will be comparing AE320 and AE309, two Passive Floor-standing speakers by Acoustic Energy
Let's have a brief look at the main features
of AE320 and AE309 first before getting into our more
detailed comparison.
AE320 Key Specs
- 3-way Design
- 1.1" dome with waveguide Tweeter
- 5.2" Midrange
- 2 x 5.2" ceramic aluminium sandwich Woofer
- 35Hz - 30kHz Frequency Response
- 90 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 200watts
- Weight:26.00kg
- Dimensions (H x W x D): 1000.0" x 6.9" x 10.2"( 1000.0 x 175.0 x 260.0mm )
AE309 Key Specs
- 3-way Design
- 1.1" dome with waveguide Tweeter
- 5.2" Midrange
- 5.2" ceramic aluminium sandwich Woofer
- 5.2" Midrange
- 38Hz - 30kHz Frequency Response
- 89 dB Sensitivity
- Impedance: 6ohms
- Power Range:up to 175watts
- Weight:22.00kg
- Dimensions (H x W x D): 900.0" x 6.9" x 10.2"( 900.0 x 175.0 x 260.0mm )
AE320 and AE309 are members of Acoustic Energy's AE300 series of speakers. Below you can find the loudspeakers from this series.
What size room are the AE320 and AE309 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
AE320 |
AE309 |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Good |
Good |
| Large Room |
Good |
Good |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the AE320 and AE309 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both AE320 and AE309 are 3-way speakers.
| Driver |
AE320 |
AE309 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1.1-inch
|
1.1-inch
|
|
Midrange
|
1 x 5.2-inch |
1 x 5.2-inch |
|
Woofer
|
2 x 5.2-inch
|
1 x 5.2-inch
|
AE320 features a 1.1" aluminium dome with waveguide Tweeter , a 5.2" Midrange and 2 x 5.2" ceramic aluminium sandwich Woofer with a Crossover frequency at 380Hz and 3400Hz. On the other hand, the AE309 features a 1.1" aluminium dome with waveguide Tweeter , a 5.2" Midrange and 1 x 5.2" ceramic aluminium sandwich Woofer with a Crossover frequency at 296Hz and 2560Hz.
Frequency Response
AE320 has a frequency range of 35Hz - 30kHz whereas AE309 has a frequency range of 38Hz - 30kHz. With a minimum frequency of 35Hz, the AE320 can go slightly deeper then the AE309's min frequency of 38Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
AE320 is a 8 ohms speaker compared to the AE309 which has a nominal impedance of 6 ohms.
These two speakers also have different sensitivity levels. AE320 sensitivity is rated at 90 dB and the AE309's is rated at 89 dB. This 1 dB difference makes the AE320 a more sensitive speaker compared to AE309, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
AE320 can handle a max power of 200 watts RMS from the amp the whereas AE309 has a max power handling value of 175 watts RMS, 25 watts less than the AE320.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Cabinet Type and Port Position
Both AE320 and AE309 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare AE320's and AE309's external dimensions. AE320 has external dimensions of 1000.0 x 175.0 x 260.0mm ( 39.4 x 6.9 x 10.2inch) whereas AE309 has external dimensions of 900.0 x 175.0 x 260.0mm ( 35.4 x 6.9 x 10.2inch) .
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the AE320 is approximately 455.0cm2 / 70.5inch2 and base area of the AE309 is approximately 455.0cm2 / 70.5inch2.