In this review, we will be comparing two different type of speakers by Acoustic Energy. Acoustic Energy AE107 Mark II is a Center Channel speaker whereas the AE120 MII is a Floor-standing speaker.
Let's have a brief look at the main features
of AE107 Mark II and AE120 Mark II first before getting into our more
detailed comparison.
AE107 MII and AE120 MII are members of Acoustic Energy's AE100 series of speakers. Below you can find the loudspeakers from this series.
What size room are the AE107 Mark II and AE120 Mark II speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the AE107 Mark II and AE120 Mark II compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that AE107 MII is a 2-way design whereas the AE120 MII is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
AE107 Mark II |
AE120 Mark II |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
1 x 5.2-inch |
|
Woofer
|
2 x 5.2-inch
|
2 x 5.2-inch
|
AE107 MII features a 1" fabric soft dome with waveguide Tweeter and 2 x 5.2" paper cone Woofer with a Crossover frequency at 2200Hz. On the other hand, the AE120 MII features a 1" fabric dome with waveguide Tweeter , a 5.2" Midrange and 2 x 5.2" paper cone Woofer with a Crossover frequency at 300Hz and 2.7kHz.
Frequency Response
AE107 MII has a frequency range of 55Hz - 26kHz whereas AE120 MII has a frequency range of 39Hz - 26kHz. With a minimum frequency of 39Hz, the AE120 MII can go significantly deeper on the low side and provide stronger bass compared to the AE107 MII's min frequency of 55Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
AE107 MII and AE120 MII have the same Impedance of 6 ohms and their sensitivity is also same at 90 dB.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
AE107 MII can handle a max power of 200 watts RMS from the amp the whereas AE107 MII has a max power handling value of 175 watts RMS , 25 watts less than the AE120 MII.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Cabinet Type and Port Position
Both AE107 MII and AE120 MII have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare AE107 Mark II's and AE120 Mark II's external dimensions. AE107 Mark II has external dimensions of 175.0 x 380.0 x 250.0mm ( 6.9 x 15 x 9.8inch) whereas AE120 Mark II has external dimensions of 950.0 x 165.0 x 250.0mm ( 37.4 x 6.5 x 9.8inch) .
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the AE107 Mark II is approximately 950.0cm2 / 147.3inch2 and base area of the AE120 Mark II is approximately 412.5cm2 / 63.9inch2. The AE107 MII requires 130% more surface area than the AE120 MII which gives it a small disadvantage on placement in tight spaces.