In this review, we will be comparing SCM19 and 607 S2 AE, two Passive Bookshelf speakers from ATC and Bowers Wilkins.
Let's have a brief look at the main features
of ATC SCM19 and B&W 607 S2 first before getting into our more
detailed comparison.
| Key Specs | ATC SCM19 | B&W 607 S2 |
|---|
| Design | 2-way | 2-way |
|---|
| Tweeter | 0.98" | 1" Decoupled Double Dome |
|---|
| Woofer | 5.91" | 5" Continuum |
|---|
| Frequency response | 54-22k Hz | 52-28k Hz |
|---|
| Sensitivity | 85 dB | 84 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Power range | 75 to 300 Watts watts | 30-100 watts |
|---|
| Weight | 17.80kg / 39.2lbs | 4.70kg / 10.3lbs |
|---|
| Dimensions (H x W x D) | 17.24" x 10.43" x 11.81"
438.0 x 265.0 x 300.0mm | 11-13/16" x 6-1/2" x 9-1/8"
301.0 x 166.0 x 232.0mm |
|---|
What size room are the ATC SCM19 and B&W 607 S2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
ATC SCM19 |
B&W 607 S2 |
| Near-field |
Good |
Average |
| Small Room |
Good |
Good |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Poor |
| Very Large Room |
No way |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking
through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both SCM19 and 607 S2 AE are 2-way speakers.
ATC SCM19B&W 607 S2
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
ATC SCM19 |
B&W 607 S2 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
0.98-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.91-inch
|
1 x 5-inch
|
SCM19 features a 0.98" Tweeter and 1 x 5.91" Woofer with a Crossover frequency at 2.5kHz. On the other hand, the 607 S2 AE features a 1" Aluminum Decoupled Double Dome Tweeter and 1 x 5" Continuum Woofer.
Frequency Response
SCM19 has a frequency range of 54-22k Hz whereas 607 S2 AE has a frequency range of 52-28k Hz. With a minimum frequency of 52Hz, the 607 S2 AE can go slightly deeper then the SCM19's min frequency of 54Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
SCM19 and 607 S2 AE have the same Impedance of 8 ohms but where they differ is the sensitivity levels. SCM19 sensitivity is rated at 85 dB and the 607 S2 AE's is at 84 dB. This 1 dB difference makes the ATC SCM19 a more sensitive speaker compared to B&W 607 S2, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
607 S2 AE can handle a max power of 100 watts RMS, whereas SCM19 has a max power handling value of watts RMS, 100 watts less than the 607 S2 AE.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier — change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
607 S2 AE features Binding post posts which make bi-amping or bi-wiring possible. SCM19 has a Binding Posts/4mm Plugs, bi-wire which doesn't feature bi-amping/bi-wiring.
B&W 607 S2's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ATC SCM19's and B&W 607 S2's external dimensions. ATC SCM19 has external dimensions of 438.0 x 265.0 x 300.0mm (17.24 x 10.43 x 11.81inch) whereas B&W 607 S2 has external dimensions of 301.0 x 166.0 x 232.0mm (11-13/16 x 6-1/2 x 9-1/8inch).
ATC SCM19 is clearly the larger of the two speakers. Its body is 99mm wider, 137mm taller and 68mm deeper than B&W 607 S2.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the ATC SCM19 is approximately 795.0cm2 / 123.2inch2 and base area of the B&W 607 S2 is approximately 385.1cm2 / 59.7inch2. The SCM19 requires 106% more surface area than the 607 S2 AE which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The ATC SCM19 weighs 17.80kg / 39.2lbs and the B&W 607 S2 weighs 4.70kg / 10.3lbs. This makes the SCM19 279% heavier than the 607 S2 AE.
Here is a comparison of how SCM19 and 607 S2 AE's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of B&W 607 S2?
Here are the items that come with the 607 S2 AE:
- 2 Bookshelf loudspeakers
- 2 Grilles
- 2 Two-piece foam port plugs
- 8 Self-adhesive rubber feet
- 4 Jumper-straps (pre-installed)
- Manual
- Bowers & Wilkins brochure
- Warranty Information
 Sensitivity |
85 dB
vs
84 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
5.91 inches
vs
5 inches
|
Larger woofer |
|
Low Frequency Response |
52 Hz
vs
54 Hz
|
Generates deeper bass |
 High Frequency Response |
28k Hz
vs
22k Hz
|
Generates higher frequency |
 Height |
301mm
vs
438mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
385cm2
vs
795cm2
|
Takes less floor space |
 Price per pair* |
799USD
vs
3749USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
ATC SCM19 |
Bowers & Wilkins 607 S2 Anniversary Edition |
| Brand |
ATC |
Bowers Wilkins |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
75 to 300 Watts watts |
30-100 watts |
| Sensitivity |
85 dB |
84 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
n/a |
3.0 ohms |
| Frequency Response |
54-22k Hz |
52-28k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5.91" |
5" |
| Woofer Composition |
|
Continuum |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
0.98" |
1" |
| Tweeter Type |
n/a |
Decoupled Double Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2.5kHz |
n/a |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
438.0mm (17.2") |
301.0mm (11.9") |
| Width |
265.0mm (10.4") |
166.0mm (6.5") |
| Depth |
300.0mm (11.8") |
232.0mm (9.1") |
| Weight |
17.80kg (39.2lbs) |
4.70kg (10.3lbs) |
| Enclosure |
Sealed |
Bass Reflex |
| Finish |
n/a |
MDF/Vinyl |
| Available Colors |
n/a |
Matte Black, Matte White, Oak, Red Cherry |
| Mounting Bracket |
|
No |
| Recommended Stand Height |
n/a |
24-26" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
n/a |
Yes |
Other |
|
|
| Parts Warranty |
|
5 Years |
| Labor Warranty |
|
5 Years |
These sit in different price classes - ATC SCM19 costs roughly 4.7x what B&W 607 S2 does. Expect it to lead on paper; the question is whether the gap is audible enough in your room to be worth it.
| Area | Better | Why |
|---|
| Bass |
evenly matched |
Much the same reach (54Hz vs 52Hz). |
| Amplifier needs |
evenly matched |
Similar sensitivity (85dB vs 84dB) - both want much the same power. |
| Size |
depends |
B&W 607 S2 is easier to place; ATC SCM19 is bigger, which usually goes with fuller bass. Your room decides. |
| Cabinet |
depends |
Sealed vs Ported. Sealed is tighter and happier near a wall; ported digs lower but wants space behind it. |
| Expandability |
B |
B&W 607 S2: bi-amping. |
| Price |
B |
B&W 607 S2 is cheaper - $799 against $3,749, about 79% less; arguably a different class. |
A ATC SCM19
B B&W 607 S2
depends neither is better in the abstract - it turns on your room, placement or how you will use them.
Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
B&W 607 S2 has the edge on paper, though the margin is not large. The rows marked "depends" may matter more to you than the score does. Match it to your room: we rate ATC SCM19 the better fit for near-field listening; elsewhere the two are rated the same. In a large or open-plan room, ATC SCM19 has the cabinet volume to fill it more easily; in a small room, near a wall or at desk distance, B&W 607 S2 is the easier speaker to get right.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.