In this review, we will be comparing SCM100PSLT SE and Silver 500 7G, two Passive Floor-standing speakers from ATC and Monitor Audio.
Let's have a brief look at the main features
of ATC SCM100PSLT SE and Monitor Audio Silver 500 7G first before getting into our more
detailed comparison.
| Key Specs | ATC SCM100PSLT SE | Monitor Audio Silver 500 7G |
|---|
| Design | 3-way | 3-way |
|---|
| Tweeter | 0.98" | 1" gold dome C-CAM with Uniform Dispersion (UD) Waveguide II |
|---|
| Midrange | 2.95" | 3" |
|---|
| Woofer | 12.36" | 2 x 8" C-CAM RST II |
|---|
| Frequency response | 65-17k Hz | 27-35k Hz |
|---|
| Sensitivity | 88 dB | 90.5 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Power range | 100 to 1500 Watts watts | 80-250 watts |
|---|
| Weight | — | 22.53kg / 49.6lbs |
|---|
| Dimensions (H x W x D) | — | 42-11/16" x 12-11/16" x 15-7/16"
1085.0 x 323.0 x 393.0mm |
|---|
What size room are the ATC SCM100PSLT SE and Monitor Audio Silver 500 7G speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
ATC SCM100PSLT SE |
Monitor Audio Silver 500 7G |
| Near-field |
Poor |
Bad |
| Small Room |
Average |
Poor |
| Mid-size Room |
Good |
Average |
| Large Room |
Average |
Good |
| Very Large Room |
Poor |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking
through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both SCM100PSLT SE and Silver 500 7G are 3-way speakers.
ATC SCM100PSLT SEMonitor Audio Silver 500 7G
TweeterMidrangeWoofer
Drivers drawn to scale and directly comparable. Cabinet outlines are indicative: full dimensions are not published for both. Hover a driver for its size.
| Driver |
ATC SCM100PSLT SE |
Monitor Audio Silver 500 7G |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
0.98-inch
|
1-inch
|
|
Midrange
|
1 x 2.95-inch |
1 x 3-inch |
|
Woofer
|
1 x 12.36-inch
|
2 x 8-inch
|
SCM100PSLT SE features a 0.98" Tweeter, a 2.95" Midrange and 1 x 12.36" Woofer with a Crossover frequency at 380Hz & 3.5kHz. On the other hand, the Silver 500 7G features a 1" gold dome C-CAM with Uniform Dispersion (UD) Waveguide II Tweeter, a 3" Midrange and 2 x 8" C-CAM RST II Woofer.
Frequency Response
SCM100PSLT SE has a frequency range of 65-17k Hz whereas Silver 500 7G has a frequency range of 27-35k Hz. With a minimum frequency of 27Hz, the Silver 500 7G can go significantly deeper on the low side and provide stronger bass compared to the SCM100PSLT SE's min frequency of 65Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
SCM100PSLT SE and Silver 500 7G have the same Impedance of 8 ohms but where they differ is the sensitivity levels. SCM100PSLT SE sensitivity is rated at 88 dB and the Silver 500 7G's is at 90.5 dB. This 3 dB difference makes the Monitor Audio Silver 500 7G a more sensitive speaker compared to ATC SCM100PSLT SE, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Silver 500 7G can handle a max power of 250 watts RMS, whereas SCM100PSLT SE has a max power handling value of watts RMS, 250 watts less than the Silver 500 7G.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier — change it to the one you own, or any you are
considering, and watch both numbers move.
Monitor Audio Silver 500 7G
Input Type and Bi-Amping / Bi-Wiring
Silver 500 7G features Binding post posts which make bi-amping or bi-wiring possible. SCM100PSLT SE has a XLR which doesn't feature bi-amping/bi-wiring.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare ATC SCM100PSLT SE's and Monitor Audio Silver 500 7G's external dimensions. ATC SCM100PSLT SE has external dimensions of () whereas Monitor Audio Silver 500 7G has external dimensions of 1085.0 x 323.0 x 393.0mm (42-11/16 x 12-11/16 x 15-7/16inch).
Monitor Audio Silver 500 7G is clearly the larger of the two speakers. Its body is 323mm wider, 1085mm taller and 393mm deeper than ATC SCM100PSLT SE.
What's in the Box of Monitor Audio Silver 500 7G?
Here are the items that come with the Silver 500 7G:
- Floorstanding loudspeaker
- Grille
- 4 Outrigger feet
- 4 Rubber feet (pre-installed on outrigger feet)
- 4 Spikes
- 4 Bolts
- 4 Machine screws
- 2 Foam port plugs
- 2 Hex-keys
- Owners Manual
- Important Safety Instructions