In this review, we will be comparing MiniVee X and Monitor XT12, two Powered Subwoofer speakers from Velodyne and Polk Audio. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Velodyne MiniVee X and Polk Monitor XT12 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Velodyne MiniVee Xand Polk Monitor XT12 have a single woofer setup however the Velodyne MiniVee X's woofer is 8-inch whereas the Polk Monitor XT12 features a 12-inch woofer.
Frequency Response
MiniVee X has a frequency range of 32-180 Hz whereas Monitor XT12 has a frequency range of 24-160 Hz. With a minimum frequency of 24Hz, the Monitor XT12 can go significantly deeper on the low side and provide stronger bass compared to the MiniVee X's min frequency of 32Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Velodyne MiniVee X's and Polk Monitor XT12's external dimensions. Velodyne MiniVee X has external dimensions of 300 x 290 x 290 mm () whereas Polk Monitor XT12 has external dimensions of 418.0 x 408.0 x 485.0mm (16-7/16inch x 16-1/16inch x 19-1/16inch).
Polk Monitor XT12 is clearly the larger of the two speakers. Its body is 118mm wider, 118mm taller and 195mm deeper than Velodyne MiniVee X.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Polk Monitor XT12 needs about 135% more floor or shelf area. Polk Monitor XT12 is 195mm deeper, so it stands that much further out from the wall. Polk Monitor XT12 is 118mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Velodyne MiniVee X is approximately 841.0cm2 / 130.4inch2 and base area of the Polk Monitor XT12 is approximately 1978.8cm2 / 306.7inch2. The MiniVee X requires 57% less surface area than the Monitor XT12 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Velodyne MiniVee X weighs 15.00kg / 33lbs and the Polk Monitor XT12 weighs 17.73kg / 39lbs. This makes the Monitor XT12 18% heavier than the MiniVee X.
Here is a comparison of how MiniVee X and Monitor XT12's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 High Frequency Response |
180 Hz
vs
160 Hz
|
Generates higher frequency |
 Passive Radiator |
8" passive radiator, force-cancelling
vs
None
|
Increases the bass performance |
| App-Based Control |
Auto EQ SUB (iOS, Android)
vs
None
|
Control the speaker via an app |
 Height |
300mm
vs
418mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
841cm2
vs
1978cm2
|
Takes less floor space |
 Woofer Size |
12 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
24 Hz
vs
32 Hz
|
Generates deeper bass |
 Price per pair* |
399USD
vs
1299USD
|
costs less (*prices may change depending on the seller, location and time) |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Polk Monitor XT12 needs about 135% more floor area. Polk Monitor XT12 stands 195mm further into the room. Polk Monitor XT12 is 118mm taller.
| General |
Velodyne MiniVee X |
Polk Monitor XT12 |
| Brand |
Velodyne |
Polk Audio |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Frequency Response |
32-180 Hz |
24-160 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
350-watt RMS |
50-watt RMS |
| Watts Peak (Max) |
800-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
8" |
12" |
| Woofer Composition |
|
Bi-laminate paper |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
300.0mm (11.8") |
418.0mm (16.5") |
| Width |
290.0mm (11.4") |
408.0mm (16.1") |
| Depth |
290.0mm (11.4") |
485.0mm (19.1") |
| Weight |
15.00kg (33lbs) |
17.73kg (39lbs) |
| Enclosure |
|
Bass Reflex |
| Finish |
High-gloss black, high-gloss white, or transparent acrylic |
n/a |
| Available Colors |
High-gloss black, high-gloss white, transparent acrylic (limited edition) |
n/a |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| USB Port |
5V/1A, powers the Wi-Connect II receiver only |
n/a |
Other |
|
|
| Parts Warranty |
|
3 Years |
| Labor Warranty |
|
3 Years |
A sealed subwoofer against a ported one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | B | Polk Monitor XT12 goes deeper - 24Hz against 32Hz. That gap covers the lowest notes of a five-string bass and a concert bass drum. |
| Amplifier power | A | Velodyne MiniVee X has the bigger amplifier - 350W against 50W RMS, about 8.5dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | B | Polk Monitor XT12 moves more air: 12" against 8" is 2.25x the cone area, not the 1.5x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | Velodyne MiniVee X is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room; Polk Monitor XT12 is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Cabinet size | depends | Velodyne MiniVee X is about 69% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Price | B | Polk Monitor XT12 costs less - $399 against $1,299, about 69% less. |
A Velodyne MiniVee X B Polk Monitor XT12
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Polk Monitor XT12 has the edge on paper, though not by much. The "depends" rows are more likely to decide this than the score is. Films or music? If this is mainly a home cinema, Polk Monitor XT12 will hit harder for the money; if it is mainly for music in a normal-sized room, Velodyne MiniVee X is usually the easier one to make sound right. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $399 each, two Polk Monitor XT12 cost about $798 against $1,299 for one of the other, which is worth a thought.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.