In this review, we will be comparing Velodyne MiniVee X and RP-1200SW, two Powered Subwoofer speakers from Velodyne and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Velodyne MiniVee X and Klipsch RP-1200SW first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Velodyne MiniVee X and Klipsch RP-1200SW compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Velodyne MiniVee Xand Klipsch RP-1200SW have a single woofer setup however the Velodyne MiniVee X's woofer is 8-inch whereas the Klipsch RP-1200SW features a 12-inch woofer.
Frequency Response
Velodyne MiniVee X has a frequency range of 32-180 Hz whereas RP-1200SW has a frequency range of 16.5-138 Hz. With a minimum frequency of 17Hz, the RP-1200SW can go significantly deeper on the low side and provide stronger bass compared to the Velodyne MiniVee X's min frequency of 32Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Velodyne MiniVee X's and Klipsch RP-1200SW's external dimensions. Velodyne MiniVee X has external dimensions of 300 x 290 x 290 mm ( ) whereas Klipsch RP-1200SW has external dimensions of 482.0 x 432.0 x 659.0mm ( 18-15/16inch x 17inch x 25-15/16inch ) .
Klipsch RP-1200SW is clearly the larger of the two speakers. Its body is 142mm wider, 182mm taller and 369mm deeper than Velodyne MiniVee X.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Velodyne MiniVee X is approximately 841.0cm2 / 130.4inch2 and base area of the Klipsch RP-1200SW is approximately 2846.9cm2 / 441.3inch2. The Velodyne MiniVee X requires 70% less surface area than the RP-1200SW which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Velodyne MiniVee X weighs 15.00kg / 33lbs and the Klipsch RP-1200SW weighs 31.18kg / 68.6lbs. This makes the RP-1200SW 108% heavier than the Velodyne MiniVee X.
Here is a comparison of how Velodyne MiniVee X and RP-1200SW's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 High Frequency Response |
180k Hz
vs
138k Hz
|
Generates higher frequency |
 Passive Radiator |
8" passive radiator, force-cancelling
vs
None
|
Increases the bass performance |
| App-Based Control |
Auto EQ SUB (iOS, Android)
vs
None
|
Control the speaker via an app |
 Height |
300mm
vs
482mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
841cm2
vs
2846cm2
|
Takes less floor space |
 Woofer Size |
12 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
17 Hz
vs
32 Hz
|
Generates deeper bass |
 Price per pair* |
999USD
vs
1299USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Velodyne MiniVee X |
Klipsch Reference Premiere RP-1200SW |
| Brand |
Velodyne |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Frequency Response |
32-180 Hz |
16.5-138 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
350-watt RMS |
400-watt RMS |
| Watts Peak (Max) |
800-watt RMS |
800-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
8" |
12" |
| Woofer Composition |
|
Cerametallic |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
300.0mm (11.8") |
482.0mm (19") |
| Width |
290.0mm (11.4") |
432.0mm (17") |
| Depth |
290.0mm (11.4") |
659.0mm (25.9") |
| Weight |
15.00kg (33lbs) |
31.18kg (68.6lbs) |
| Enclosure |
|
Bass Reflex |
| Finish |
High-gloss black, high-gloss white, or transparent acrylic |
MDF with Vinyl |
| Available Colors |
High-gloss black, high-gloss white, transparent acrylic (limited edition) |
Ebony |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| USB Port |
5V/1A, powers the Wi-Connect II receiver only |
n/a |
Other |
|
|
| Parts Warranty |
|
5 years |
| Labor Warranty |
|
5 years |