In this review, we will be comparing SA-CS9 and R-10SWi, two Powered Subwoofer speakers from Sony and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Sony SA-CS9 and Klipsch R-10SWi first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Sony SA-CS9and Klipsch R-10SWi have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
SA-CS9 has a frequency range of 28-200 Hz whereas R-10SWi has a frequency range of 32-120 Hz. With a minimum frequency of 28Hz, the SA-CS9 can go slightly deeper then the R-10SWi's min frequency of 32Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both Sony SA-CS9 and Klipsch R-10SWi have Bass Reflex type cabinets. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Klipsch R-10SWi Port
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sony SA-CS9's and Klipsch R-10SWi's external dimensions. Sony SA-CS9 has external dimensions of 345.0 x 295.0 x 400.0mm (11.6 x 13.6 x 15.7 inch) whereas Klipsch R-10SWi has external dimensions of 370.0 x 318.0 x 462.0mm (14-9/16 x 12-1/2 x 18-3/16inch).
Klipsch R-10SWi is clearly the larger of the two speakers. Its body is 23mm wider, 25mm taller and 62mm deeper than Sony SA-CS9.
Below you can see the front view size comparison of Sony SA-CS9 and Klipsch R-10SWi in scale.
Comparison image of Sony SA-CS9 and Klipsch R-10SWi Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sony SA-CS9 is approximately 1180.0cm2 / 182.9inch2 and base area of the Klipsch R-10SWi is approximately 1469.2cm2 / 227.7inch2. The SA-CS9 requires 20% less surface area than the R-10SWi which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Sony SA-CS9 weighs 11.50kg / 25.3lbs and the Klipsch R-10SWi weighs 11.59kg / 25.5lbs. This makes the R-10SWi 1% heavier than the SA-CS9.
Here is a comparison of how SA-CS9 and R-10SWi's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Sony SA-CS9?
Here are the items that are included inside the box of SA-CS9:
- Sony SA-CS9 10-inch 115W Subwoofer
- 6.5-feet Phono Cord
- 4 x Foot Pads
- Grille
- Limited 90-Day Manufacturer Warranty
What's in the Box of Klipsch R-10SWi?
Here are the items that come with the R-10SWi:
- Powered sub
- Wireless transmitter (attached 12
 Low Frequency Response |
28 Hz
vs
32 Hz
|
Generates deeper bass |
 High Frequency Response |
200k Hz
vs
120k Hz
|
Generates higher frequency |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 Height |
345mm
vs
370mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1180cm2
vs
1469cm2
|
Takes less floor space |
 Price per pair* |
248USD
vs
274USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Sony SA-CS9 |
Klipsch Reference R-10SWi |
| Brand |
Sony |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
115 watts |
150 watts |
| Frequency Response |
28-200 Hz |
32-120 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
115-watt RMS |
150-watt RMS |
| Watts Peak (Max) |
n/a |
300-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
foamed-mica cellular reinforced |
Copper IMG |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
rear |
Physical Specs |
|
|
| Height |
345.0mm (13.6") |
370.0mm (14.6") |
| Width |
295.0mm (11.6") |
318.0mm (12.5") |
| Depth |
400.0mm (15.7") |
462.0mm (18.2") |
| Weight |
11.50kg (25.3lbs) |
11.59kg (25.5lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Available Colors |
Black |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
2 Years |
| Labor Warranty |
|
2 Years |