In this review, we will be comparing SA-CS9 and SUB8 v2, two Powered Subwoofer speakers from Sony and Kanto. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Sony SA-CS9 and Kanto SUB8 v2 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Sony SA-CS9 and Kanto SUB8 v2 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Sony SA-CS9and Kanto SUB8 v2 have a single woofer setup however the Sony SA-CS9's woofer is 10-inch whereas the Kanto SUB8 v2 features a 8-inch woofer.
Frequency Response
SA-CS9 has a frequency range of 28-200 HZ whereas SUB8 v2 has a frequency range of 35-175 Hz. With a minimum frequency of 28Hz, the SA-CS9 can go significantly deeper on the low side and provide stronger bass compared to the SUB8 v2's min frequency of 35Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Sony SA-CS9 has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the Kanto SUB8 v2 have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sony SA-CS9's and Kanto SUB8 v2's external dimensions. Sony SA-CS9 has external dimensions of 295 x 345 x 400 mm ( 11.6 x 13.6 x 15.7 inch) whereas Kanto SUB8 v2 has external dimensions of 302.0 x 281.0 x 326.0mm ( 11-7/8inch x 11-1/16inch x 12-13/16inch ) .
Sony SA-CS9 is clearly the larger of the two speakers. Its body is 14mm wider, 43mm taller and 74mm deeper than Kanto SUB8 v2.
Below you can see the front view size comparison of Sony SA-CS9 and Kanto SUB8 v2 in scale.
Comparison image of Sony SA-CS9 and Kanto SUB8 v2 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sony SA-CS9 is approximately 1180.0cm2 / 182.9inch2 and base area of the Kanto SUB8 v2 is approximately 916.1cm2 / 142.0inch2. The SA-CS9 requires 29% more surface area than the SUB8 v2 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Sony SA-CS9 weighs 11.50kg / 25.3lbs and the Kanto SUB8 v2 weighs 7.82kg / 17.2lbs. This makes the SA-CS9 47% heavier than the SUB8 v2.
Here is a comparison of how SA-CS9 and SUB8 v2's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Sony SA-CS9?
Here are the items that are included inside the box of SA-CS9:
Sony SA-CS9 10-inch 115W Subwoofer 6.5-feet Phono Cord 4 x Foot Pads Grille Limited 90-Day Manufacturer Warranty
What's in the Box of Kanto SUB8 v2?
Here are the items that come with the SUB8 v2:
Powered subwoofer6-feet AC power cord10-feet mono-RCA cableUser ManualUser Manual Language Update Note
 Woofer Size |
10 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
28 Hz
vs
35 Hz
|
Generates deeper bass |
 High Frequency Response |
200k Hz
vs
175k Hz
|
Generates higher frequency |
 Height |
302mm
vs
345mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
916cm2 (281x326mm)
vs
1180cm2 (295x400mm)
|
Takes less floor space |
 Price per pair* |
240USD
vs
248USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Sony SA-CS9 |
Kanto SUB8 v2 |
| Brand |
Sony |
Kanto |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
115 watts |
150 watts |
| Frequency Response |
28-200 HZ |
35-175 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
115-watt RMS |
150-watt RMS |
| Watts Peak (Max) |
n/a |
300-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
8" |
| Woofer Composition |
foamed-mica cellular reinforced |
Paper |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
345.0mm (13.6") |
302.0mm (11.9") |
| Width |
295.0mm (11.6") |
281.0mm (11.1") |
| Depth |
400.0mm (15.7") |
326.0mm (12.8") |
| Weight |
11.50kg (25.3lbs) |
7.82kg (17.2lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Available Colors |
Black |
n/a |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
2 Years |
| Labor Warranty |
|
2 Years |