In this review, we will be comparing Gravis VI and ASW608, two Powered Subwoofer speakers from Sonus faber and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Sonus faber Gravis VI and B&W ASW608 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Sonus faber Gravis VI and B&W ASW608 have a totally different setup: the Sonus faber Gravis VI features 2 x 12.5-inch drivers whereas the ASW608 features 1 x 8-inch drivers.
Frequency Response
Gravis VI has a frequency range of 18-120 Hz whereas ASW608 has a frequency range of 32-140 Hz. With a minimum frequency of 18Hz, the Gravis VI can go significantly deeper on the low side and provide stronger bass compared to the ASW608's min frequency of 32Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both Sonus faber Gravis VI and B&W ASW608 have Acoustic Suspension type cabinets. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sonus faber Gravis VI's and B&W ASW608's external dimensions. Sonus faber Gravis VI has external dimensions of 616.0 x 448.0 x 585.0mm (24-1/4 x 17-5/8 x 23-1/16inch) whereas B&W ASW608 has external dimensions of 272.0 x 261.0 x 350.0mm (10-11/16 x 10-1/4 x 13-3/4inch).
Sonus faber Gravis VI is clearly the larger of the two speakers. Its body is 187mm wider, 344mm taller and 235mm deeper than B&W ASW608.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Sonus faber Gravis VI needs about 187% more floor or shelf area. Sonus faber Gravis VI is 235mm deeper, so it stands that much further out from the wall. Sonus faber Gravis VI is 344mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sonus faber Gravis VI is approximately 2620.8cm2 / 406.2inch2 and base area of the B&W ASW608 is approximately 913.5cm2 / 141.6inch2. The Gravis VI requires 187% more surface area than the ASW608 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Sonus faber Gravis VI weighs 52.00kg / 114.4lbs and the B&W ASW608 weighs 8.86kg / 19.5lbs. This makes the Gravis VI 487% heavier than the ASW608.
Here is a comparison of how Gravis VI and ASW608's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
12.5 inches
vs
8 inches
|
Larger woofer |
| Number of Woofers |
2
vs
1
|
More woofers |
| Low Frequency Response |
18 Hz
vs
32 Hz
|
Generates deeper bass |
 High Frequency Response |
140 Hz
vs
120 Hz
|
Generates higher frequency |
 Height |
272mm
vs
616mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
913cm2
vs
2620cm2
|
Takes less floor space |
 Price per pair* |
599USD
vs
6500USD
|
costs less (*prices may change depending on the seller, location and time) |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Sonus faber Gravis VI needs about 187% more floor area. Sonus faber Gravis VI stands 235mm further into the room. Sonus faber Gravis VI is 344mm taller.
| General |
Sonus faber Gravis VI |
Bowers & Wilkins ASW608 |
| Brand |
Sonus faber |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
1700 watts |
200 watts |
| Frequency Response |
18-120 Hz |
32-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
1700-watt RMS |
200-watt RMS |
| Watts Peak (Max) |
2400-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
2 |
1 |
| Woofer Size |
12.5" |
8" |
| Woofer Composition |
Honeycomb sandwich |
Paper/Aramid Fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
Continuously adjustable |
n/a |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
616.0mm (24.3") |
272.0mm (10.7") |
| Width |
448.0mm (17.6") |
261.0mm (10.3") |
| Depth |
585.0mm (23") |
350.0mm (13.8") |
| Weight |
52.00kg (114.4lbs) |
8.86kg (19.5lbs) |
| Enclosure |
Acoustic Suspension |
Acoustic Suspension |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
2 Years |
| Labor Warranty |
|
2 Years |
Two quite different sizes of subwoofer. Room volume decides this more than anything else on the page: a big driver in a small room is wasted, and a small one in a large room is worked to death.
| Area | Better | Why |
|---|
| Bass depth | A | Sonus faber Gravis VI goes deeper - 18Hz against 32Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | A | Sonus faber Gravis VI has the bigger amplifier - 1700W against 200W RMS, about 9.3dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | Sonus faber Gravis VI moves more air: 2 x 12.5" against 8" is 4.88x the cone area, not the 2.21x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | evenly matched | Both are sealed designs, so they roll off in much the same way. |
| Cabinet size | depends | B&W ASW608 is about 85% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Price | B | B&W ASW608 costs less - $599 against $6,500, about 91% less. |
A Sonus faber Gravis VI B B&W ASW608
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: Sonus faber Gravis VI measures better, B&W ASW608 costs about 91% less. In a normal room, placement will make a bigger difference than the gap between these two. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $599 each, two B&W ASW608 cost about $1,198 against $6,500 for one of the other, which is worth a thought. If placement is the constraint - a corner, behind a sofa, under a desk - B&W ASW608 is the one that will actually go there, and a well-placed small subwoofer beats a badly-placed big one every time.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.