In this review, we will be comparing Gravis V and ASW610, two Powered Subwoofer speakers from Sonus faber and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Sonus faber Gravis V and B&W ASW610 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Sonus faber Gravis Vand B&W ASW610 have a single woofer setup however the Sonus faber Gravis V's woofer is 12.5-inch whereas the B&W ASW610 features a 10-inch woofer.
Frequency Response
Gravis V has a frequency range of 20-120 Hz whereas ASW610 has a frequency range of 27-140 Hz. With a minimum frequency of 20Hz, the Gravis V can go significantly deeper on the low side and provide stronger bass compared to the ASW610's min frequency of 27Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both Sonus faber Gravis V and B&W ASW610 have Acoustic Suspension type cabinets. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sonus faber Gravis V's and B&W ASW610's external dimensions. Sonus faber Gravis V has external dimensions of 455.0 x 448.0 x 448.0mm (17-15/16 x 17-5/8 x 17-5/8inch) whereas B&W ASW610 has external dimensions of 321.0 x 312.0 x 394.0mm (12-5/8 x 12-1/4 x 15-1/2inch).
Sonus faber Gravis V is clearly the larger of the two speakers. Its body is 136mm wider, 134mm taller and 54mm deeper than B&W ASW610.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Sonus faber Gravis V needs about 63% more floor or shelf area. Sonus faber Gravis V is 54mm deeper, so it stands that much further out from the wall. Sonus faber Gravis V is 134mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sonus faber Gravis V is approximately 2007.0cm2 / 311.1inch2 and base area of the B&W ASW610 is approximately 1229.3cm2 / 190.5inch2. The Gravis V requires 63% more surface area than the ASW610 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Sonus faber Gravis V weighs 32.00kg / 70.4lbs and the B&W ASW610 weighs 12.55kg / 27.6lbs. This makes the Gravis V 155% heavier than the ASW610.
Here is a comparison of how Gravis V and ASW610's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
12.5 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
20 Hz
vs
27 Hz
|
Generates deeper bass |
 High Frequency Response |
140 Hz
vs
120 Hz
|
Generates higher frequency |
 Height |
321mm
vs
455mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1229cm2
vs
2007cm2
|
Takes less floor space |
 Price per pair* |
899USD
vs
5000USD
|
costs less (*prices may change depending on the seller, location and time) |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Sonus faber Gravis V needs about 63% more floor area. Sonus faber Gravis V stands 54mm further into the room. Sonus faber Gravis V is 134mm taller.
| General |
Sonus faber Gravis V |
Bowers & Wilkins ASW610 |
| Brand |
Sonus faber |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
850 watts |
200 watts |
| Frequency Response |
20-120 Hz |
27-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
850-watt RMS |
200-watt RMS |
| Watts Peak (Max) |
1200-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12.5" |
10" |
| Woofer Composition |
Honeycomb sandwich |
Paper/Aramid Fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
Continuously adjustable |
n/a |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
455.0mm (17.9") |
321.0mm (12.6") |
| Width |
448.0mm (17.6") |
312.0mm (12.3") |
| Depth |
448.0mm (17.6") |
394.0mm (15.5") |
| Weight |
32.00kg (70.4lbs) |
12.55kg (27.6lbs) |
| Enclosure |
Acoustic Suspension |
Acoustic Suspension |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
2 Years |
| Labor Warranty |
|
2 Years |
Different price classes - Sonus faber Gravis V costs roughly 5.6x what B&W ASW610 does. Before paying it, read the note below about two smaller subwoofers.
| Area | Better | Why |
|---|
| Bass depth | A | Sonus faber Gravis V goes deeper - 20Hz against 27Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | A | Sonus faber Gravis V has the bigger amplifier - 850W against 200W RMS, about 6.3dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | Sonus faber Gravis V moves more air: 12.5" against 10" is 1.56x the cone area, not the 1.25x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | evenly matched | Both are sealed designs, so they roll off in much the same way. |
| Cabinet size | depends | B&W ASW610 is about 57% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Price | B | B&W ASW610 costs less - $899 against $5,000, about 82% less. |
A Sonus faber Gravis V B B&W ASW610
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: Sonus faber Gravis V measures better, B&W ASW610 costs about 82% less. In a normal room, placement will make a bigger difference than the gap between these two. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $899 each, two B&W ASW610 cost about $1,798 against $5,000 for one of the other, which is worth a thought. If placement is the constraint - a corner, behind a sofa, under a desk - B&W ASW610 is the one that will actually go there, and a well-placed small subwoofer beats a badly-placed big one every time.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.