In this review, we will be comparing Gravis II and SB-1000 Pro, two Powered Subwoofer speakers from Sonus Faber and SVS. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Sonus faber Gravis II and SVS SB-1000 Pro first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Sonus faber Gravis II and SVS SB-1000 Pro compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Sonus faber Gravis IIand SVS SB-1000 Pro have a single woofer setup however the Sonus faber Gravis II's woofer is 10-inch whereas the SVS SB-1000 Pro features a 12-inch woofer.
Frequency Response
Gravis II has a frequency range of 25-120 Hz whereas SB-1000 Pro has a frequency range of 20-270 Hz. With a minimum frequency of 20Hz, the SB-1000 Pro can go significantly deeper on the low side and provide stronger bass compared to the Gravis II's min frequency of 25Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Sonus faber Gravis II has a Passive Radiator type cabinet. Passive Radiator type subwoofers sports a non-powered cone that moves in response to the main woofer to move air out in order to generate stronger bass in a smaller body compared to ported or sealed designs. On the other hand the SVS SB-1000 Pro have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sonus faber Gravis II's and SVS SB-1000 Pro's external dimensions. Sonus faber Gravis II has external dimensions of 407.0 x 358.0 x 435.0mm ( 16inch x 14-1/16inch x 17-1/8inch ) whereas SVS SB-1000 Pro has external dimensions of 343.0 x 331.0 x 402.0mm ( 13-1/2inch x 13inch x 15-13/16inch ) .
Sonus faber Gravis II is clearly the larger of the two speakers. Its body is 27mm wider, 64mm taller and 33mm deeper than SVS SB-1000 Pro.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sonus faber Gravis II is approximately 1557.3cm2 / 241.4inch2 and base area of the SVS SB-1000 Pro is approximately 1330.6cm2 / 206.2inch2. The Gravis II requires 17% more surface area than the SB-1000 Pro which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Sonus faber Gravis II weighs 21.50kg / 47.3lbs and the SVS SB-1000 Pro weighs 11.82kg / 26lbs. This makes the Gravis II 82% heavier than the SB-1000 Pro.
Here is a comparison of how Gravis II and SB-1000 Pro's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Sonus faber Gravis II?
Here are the items that are included inside the box of Gravis II:
Powered subwooferGrille6-feet AC power cord33-feet Speakon cableOwners ManualEnvironmental Information
What's in the Box of SVS SB-1000 Pro?
Here are the items that come with the SB-1000 Pro:
Powered subwooferGrille6-feet AC power cordQuick Start GuideBrochureSVS Support Information
 Passive Radiator |
2 x 10-inch
vs
None
|
Increases the bass performance |
 Driver Setup |
1-way
vs
-way
|
Have a dedicated mid-range driver |
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
20 Hz
vs
25 Hz
|
Generates deeper bass |
 High Frequency Response |
270k Hz
vs
120k Hz
|
Generates higher frequency |
| App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Height |
343mm
vs
407mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1330cm2
vs
1557cm2
|
Takes less floor space |
 Price per pair* |
600USD
vs
1499USD
|
costs less (*prices may change depending on the seller, location and time) |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
| General |
Sonus faber Gravis II |
SVS SB-1000 Pro |
| Brand |
Sonus Faber |
SVS |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
350 watts |
325 watts |
| Frequency Response |
25-120 Hz |
20-270 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
350-watt RMS |
325-watt RMS |
| Watts Peak (Max) |
n/a |
820-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
12" |
| Woofer Composition |
Treated Paper |
Fiber-composite |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
407.0mm (16") |
343.0mm (13.5") |
| Width |
358.0mm (14.1") |
331.0mm (13") |
| Depth |
435.0mm (17.1") |
402.0mm (15.8") |
| Weight |
21.50kg (47.3lbs) |
11.82kg (26lbs) |
| Enclosure |
Passive Radiator |
Acoustic Suspension |
| Available Colors |
Piano Black,Matte White |
Black,White |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Yr/3 Yr registered |
5 Years |
| Labor Warranty |
2 Yr/3 Yr registered |
5 Years |