In this review, we will be comparing Gravis I and SuperCube 4000, two Powered Subwoofer speakers from Sonus faber and Definitive Technology. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Sonus faber Gravis I and DT SuperCube 4000 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Sonus faber Gravis Iand DT SuperCube 4000 have the same driver set up: Both subwoofers have 1 x 8" drivers.
Frequency Response
Gravis I has a frequency range of 30-120 Hz whereas SuperCube 4000 has a frequency range of 16-200 Hz. With a minimum frequency of 16Hz, the SuperCube 4000 can go significantly deeper on the low side and provide stronger bass compared to the Gravis I's min frequency of 30Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Sonus faber Gravis I has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the DT SuperCube 4000 have Passive Radiator type enclosure. Passive Radiator type subwoofers sports a non-powered cone that moves in response to the main woofer to move air out in order to generate stronger bass in a smaller body compared to ported or sealed designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sonus faber Gravis I's and DT SuperCube 4000's external dimensions. Sonus faber Gravis I has external dimensions of 337.0 x 286.0 x 340.0mm (13-1/4inch x 11-1/4inch x 13-3/8inch) whereas DT SuperCube 4000 has external dimensions of 302.0 x 281.0 x 318.0mm (11-7/8 x 11-1/16 x 12-1/2inch).
Sonus faber Gravis I is clearly the larger of the two speakers. Its body is 5mm wider, 35mm taller and 22mm deeper than DT SuperCube 4000.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sonus faber Gravis I is approximately 972.4cm2 / 150.7inch2 and base area of the DT SuperCube 4000 is approximately 893.6cm2 / 138.5inch2. The Gravis I requires 9% more surface area than the SuperCube 4000 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Sonus faber Gravis I weighs 14.55kg / 32lbs and the DT SuperCube 4000 weighs 11.36kg / 25lbs. This makes the Gravis I 28% heavier than the SuperCube 4000.
Here is a comparison of how Gravis I and SuperCube 4000's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Sonus faber Gravis I?
Here are the items that are included inside the box of Gravis I:
- Powered subwoofer
- 6-feet AC power cord
- 33-feet Speakon cable
- Owners Manual
- Environmental Information
What's in the Box of DT SuperCube 4000?
Here are the items that come with the SuperCube 4000:
- 8-inch Powered subwoofer
- 7-feet AC power cord
- Remote control (CR2025 battery installed)
- 4 Threaded rubber-feet
- 4 Spike feet (hex-nut attached)
- Owners Manual
- SC4000 Booklet
 Low Frequency Response |
16 Hz
vs
30 Hz
|
Generates deeper bass |
 High Frequency Response |
200 Hz
vs
120 Hz
|
Generates higher frequency |
 Height |
302mm
vs
337mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
893cm2
vs
972cm2
|
Takes less floor space |
 Price per pair* |
799USD
vs
999USD
|
costs less (*prices may change depending on the seller, location and time) |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Sonus faber Gravis I needs about 9% more floor area. Sonus faber Gravis I stands 22mm further into the room. Sonus faber Gravis I is 35mm taller.
| General |
Sonus faber Gravis I |
Definitive Technology SuperCube 4000 |
| Brand |
Sonus faber |
Definitive Technology |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
150 watts |
1200 watts |
| Frequency Response |
30-120 Hz |
16-200 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
150-watt RMS |
1200-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
8" |
8" |
| Woofer Composition |
Treated Paper |
|
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
40-150 Hz and 40-150 Hz |
| Firing Direction |
bottom |
front |
Physical Specs |
|
|
| Height |
337.0mm (13.3") |
302.0mm (11.9") |
| Width |
286.0mm (11.3") |
281.0mm (11.1") |
| Depth |
340.0mm (13.4") |
318.0mm (12.5") |
| Weight |
14.55kg (32lbs) |
11.36kg (25lbs) |
| Enclosure |
Acoustic Suspension |
Passive Radiator |
| Available Colors |
Piano Black,Matte White |
n/a |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Yr/3 Yr registered |
3 Years |
| Labor Warranty |
2 Yr/3 Yr registered |
3 Years |
A sealed subwoofer against a passive radiator one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | B | DT SuperCube 4000 goes deeper - 16Hz against 30Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | B | DT SuperCube 4000 has the bigger amplifier - 1200W against 150W RMS, about 9dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | evenly matched | Near-identical radiating area (8" against 8"). |
| Enclosure | depends | Sonus faber Gravis I is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room; DT SuperCube 4000 is passive radiator - a passive radiator behaves like a port without the pipe noise, and suits a slim cabinet. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Driver placement | depends | Sonus faber Gravis I fires down and DT SuperCube 4000 fires front. A down-firing driver is more forgiving of a grille-less look and of a hard floor; a front-firing one is the safer choice on a thick carpet or a suspended timber floor. |
| Cabinet size | depends | DT SuperCube 4000 is about 18% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | B | DT SuperCube 4000 carries 3 years on parts against 2 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | B | DT SuperCube 4000 costs less - $799 against $999, about 20% less. |
A Sonus faber Gravis I B DT SuperCube 4000
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
DT SuperCube 4000 is the easier recommendation: it leads on most of the measured areas and costs less. Take Sonus faber Gravis I if one of the "depends" rows describes your room. Films or music? If this is mainly a home cinema, DT SuperCube 4000 will hit harder for the money; if it is mainly for music in a normal-sized room, Sonus faber Gravis I is usually the easier one to make sound right.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.