In this review, we will be comparing SB-1000 Pro and HTS 10, two Powered Subwoofer speakers from SVS and Polk Audio. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of SVS SB-1000 Pro and Polk HTS 10 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both SVS SB-1000 Proand Polk HTS 10 have a single woofer setup however the SVS SB-1000 Pro's woofer is 12-inch whereas the Polk HTS 10 features a 10-inch woofer.
Frequency Response
SB-1000 Pro has a frequency range of 20-270 Hz whereas HTS 10 has a frequency range of 30-120 Hz. With a minimum frequency of 20Hz, the SB-1000 Pro can go significantly deeper on the low side and provide stronger bass compared to the HTS 10's min frequency of 30Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The SVS SB-1000 Pro has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the Polk HTS 10 have Bass Reflex type enclosure. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare SVS SB-1000 Pro's and Polk HTS 10's external dimensions. SVS SB-1000 Pro has external dimensions of 343.0 x 331.0 x 402.0mm (13-1/2inch x 13inch x 15-13/16inch) whereas Polk HTS 10 has external dimensions of 423.0 x 385.0 x 459.0mm (16-5/8 x 15-1/8 x 18-1/16inch).
Polk HTS 10 is clearly the larger of the two speakers. Its body is 54mm wider, 80mm taller and 57mm deeper than SVS SB-1000 Pro.
Below you can see the front view size comparison of SVS SB-1000 Pro and Polk HTS 10 in scale.
Comparison image of SVS SB-1000 Pro and Polk HTS 10 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the SVS SB-1000 Pro is approximately 1330.6cm2 / 206.2inch2 and base area of the Polk HTS 10 is approximately 1767.2cm2 / 273.9inch2. The SB-1000 Pro requires 25% less surface area than the HTS 10 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The SVS SB-1000 Pro weighs 11.82kg / 26lbs and the Polk HTS 10 weighs 17.16kg / 37.8lbs. This makes the HTS 10 45% heavier than the SB-1000 Pro.
Here is a comparison of how SB-1000 Pro and HTS 10's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of SVS SB-1000 Pro?
Here are the items that are included inside the box of SB-1000 Pro:
- Powered subwoofer
- Grille
- 6-feet AC power cord
- Quick Start Guide
- Brochure
- SVS Support Information
What's in the Box of Polk HTS 10?
Here are the items that come with the HTS 10:
- Powered subwoofer
- Grille
- 8-feet AC power cord
- Owners Manual
- Online Product Registration sheet
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
20 Hz
vs
30 Hz
|
Generates deeper bass |
 High Frequency Response |
270 Hz
vs
120 Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Height |
343mm
vs
423mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1330cm2
vs
1767cm2
|
Takes less floor space |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
 Price per pair* |
449USD
vs
600USD
|
costs less (*prices may change depending on the seller, location and time) |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Polk HTS 10 needs about 33% more floor area. Polk HTS 10 stands 57mm further into the room. Polk HTS 10 is 80mm taller.
| General |
SVS SB-1000 Pro |
Polk Audio HTS 10 |
| Brand |
SVS |
Polk Audio |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
325 watts |
100 watts |
| Frequency Response |
20-270 Hz |
30-120 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
325-watt RMS |
100-watt RMS |
| Watts Peak (Max) |
820-watt RMS |
200-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
10" |
| Woofer Composition |
Fiber-composite |
Polypropylene |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
343.0mm (13.5") |
423.0mm (16.7") |
| Width |
331.0mm (13") |
385.0mm (15.2") |
| Depth |
402.0mm (15.8") |
459.0mm (18.1") |
| Weight |
11.82kg (26lbs) |
17.16kg (37.8lbs) |
| Enclosure |
Acoustic Suspension |
Bass Reflex |
| Available Colors |
Black,White |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
3 Years |
| Labor Warranty |
5 Years |
3 Years |
A sealed subwoofer against a ported one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | A | SVS SB-1000 Pro goes deeper - 20Hz against 30Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | A | SVS SB-1000 Pro has the bigger amplifier - 325W against 100W RMS, about 5.1dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | SVS SB-1000 Pro moves more air: 12" against 10" is 1.44x the cone area, not the 1.2x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | SVS SB-1000 Pro is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room; Polk HTS 10 is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Speaker-level inputs | A | SVS SB-1000 Pro takes a speaker-level connection as well as line level. That is what lets it work with an integrated amplifier or a vintage receiver that has no subwoofer output at all. |
| Wireless option | depends | Only SVS SB-1000 Pro offers a wireless link (as a paid option). It decides where the sub can go if you cannot run a cable, and is worth nothing if you can. |
| Cabinet size | depends | SVS SB-1000 Pro is about 39% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | A | SVS SB-1000 Pro carries 5 years on parts against 3 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | B | Polk HTS 10 costs less - $449 against $600, about 25% less. |
A SVS SB-1000 Pro B Polk HTS 10
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: SVS SB-1000 Pro measures better, Polk HTS 10 costs about 25% less. In a normal room, placement will make a bigger difference than the gap between these two. Films or music? If this is mainly a home cinema, Polk HTS 10 will hit harder for the money; if it is mainly for music in a normal-sized room, SVS SB-1000 Pro is usually the easier one to make sound right. Check your amplifier first: if it has no subwoofer or preamp output, SVS SB-1000 Pro is the only one of these two you can connect at all.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.