In this review, we will be comparing SB-1000 Pro and R-8SW, two Powered Subwoofer speakers from SVS and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of SVS SB-1000 Pro and Klipsch R-8SW first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the SVS SB-1000 Pro and Klipsch R-8SW compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both SVS SB-1000 Proand Klipsch R-8SW have a single woofer setup however the SVS SB-1000 Pro's woofer is 12-inch whereas the Klipsch R-8SW features a 8-inch woofer.
Frequency Response
SB-1000 Pro has a frequency range of 20-270 Hz whereas R-8SW has a frequency range of 38-120 Hz. With a minimum frequency of 20Hz, the SB-1000 Pro can go significantly deeper on the low side and provide stronger bass compared to the R-8SW's min frequency of 38Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The SVS SB-1000 Pro has a Acoustic Suspension type cabinet. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs. On the other hand the Klipsch R-8SW have Bass Reflex type enclosure. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare SVS SB-1000 Pro's and Klipsch R-8SW's external dimensions. SVS SB-1000 Pro has external dimensions of 343.0 x 331.0 x 402.0mm ( 13-1/2inch x 13inch x 15-13/16inch ) whereas Klipsch R-8SW has external dimensions of 335.0 x 299.0 x 345.0mm ( 13-3/16 x 11-3/4 x 13-9/16inch) .
SVS SB-1000 Pro is clearly the larger of the two speakers. Its body is 32mm wider, 8mm taller and 57mm deeper than Klipsch R-8SW.
Below you can see the front view size comparison of SVS SB-1000 Pro and Klipsch R-8SW in scale.
Comparison image of SVS SB-1000 Pro and Klipsch R-8SW Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the SVS SB-1000 Pro is approximately 1330.6cm2 / 206.2inch2 and base area of the Klipsch R-8SW is approximately 1031.6cm2 / 159.9inch2. The SB-1000 Pro requires 29% more surface area than the R-8SW which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The SVS SB-1000 Pro weighs 11.82kg / 26lbs and the Klipsch R-8SW weighs 6.82kg / 15lbs. This makes the SB-1000 Pro 73% heavier than the R-8SW.
Here is a comparison of how SB-1000 Pro and R-8SW's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of SVS SB-1000 Pro?
Here are the items that are included inside the box of SB-1000 Pro:
Powered subwooferGrille6-feet AC power cordQuick Start GuideBrochureSVS Support Information
What's in the Box of Klipsch R-8SW?
Here are the items that come with the R-8SW:
Powered sub6.5-feet AC power cordUser ManualImportant Safety InstructionsWarranty Sheet
 Woofer Size |
12 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
20 Hz
vs
38 Hz
|
Generates deeper bass |
 High Frequency Response |
270k Hz
vs
120k Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
 Height |
335mm
vs
343mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1031cm2
vs
1330cm2
|
Takes less floor space |
 Price per pair* |
349USD
vs
600USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
SVS SB-1000 Pro |
Klipsch Reference R-8SW |
| Brand |
SVS |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
325 watts |
50 watts |
| Frequency Response |
20-270 Hz |
38-120 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
325-watt RMS |
50-watt RMS |
| Watts Peak (Max) |
820-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
8" |
| Woofer Composition |
Fiber-composite |
Copper IMG |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
bottom |
Physical Specs |
|
|
| Height |
343.0mm (13.5") |
335.0mm (13.2") |
| Width |
331.0mm (13") |
299.0mm (11.8") |
| Depth |
402.0mm (15.8") |
345.0mm (13.6") |
| Weight |
11.82kg (26lbs) |
6.82kg (15lbs) |
| Enclosure |
Acoustic Suspension |
Bass Reflex |
| Available Colors |
Black,White |
n/a |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
2 Years |
| Labor Warranty |
5 Years |
2 Years |