In this review, we will be comparing SB-1000 Pro and Muro SUB2020, two Powered Subwoofer speakers from SVS and ELAC. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of SVS SB-1000 Pro and ELAC Muro SUB2020 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the SVS SB-1000 Pro and ELAC Muro SUB2020 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both SVS SB-1000 Proand ELAC Muro SUB2020 have a single woofer setup however the SVS SB-1000 Pro's woofer is 12-inch whereas the ELAC Muro SUB2020 features a 10-inch woofer.
Frequency Response
SB-1000 Pro has a frequency range of 20-270 Hz whereas Muro SUB2020 has a frequency range of 28-200 Hz. With a minimum frequency of 20Hz, the SB-1000 Pro can go significantly deeper on the low side and provide stronger bass compared to the Muro SUB2020's min frequency of 28Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both SVS SB-1000 Pro and ELAC Muro SUB2020 have Acoustic Suspension type cabinets. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare SVS SB-1000 Pro's and ELAC Muro SUB2020's external dimensions. SVS SB-1000 Pro has external dimensions of 343.0 x 331.0 x 402.0mm ( 13-1/2inch x 13inch x 15-13/16inch ) whereas ELAC Muro SUB2020 has external dimensions of 399.0 x 185.0 x 515.0mm ( 15-11/16 x 7-1/4 x 20-1/4inch) .
SVS SB-1000 Pro is 56mm shorter and 113mm less deeper than ELAC Muro SUB2020 but it is also 146mm wider.
Below you can see the front view size comparison of SVS SB-1000 Pro and ELAC Muro SUB2020 in scale.
Comparison image of SVS SB-1000 Pro and ELAC Muro SUB2020 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the SVS SB-1000 Pro is approximately 1330.6cm2 / 206.2inch2 and base area of the ELAC Muro SUB2020 is approximately 952.8cm2 / 147.7inch2. The SB-1000 Pro requires 40% more surface area than the Muro SUB2020 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The SVS SB-1000 Pro weighs 11.82kg / 26lbs and the ELAC Muro SUB2020 weighs 12.73kg / 28lbs. This makes the Muro SUB2020 8% heavier than the SB-1000 Pro.
Here is a comparison of how SB-1000 Pro and Muro SUB2020's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of SVS SB-1000 Pro?
Here are the items that are included inside the box of SB-1000 Pro:
Powered subwooferGrille6-feet AC power cordQuick Start GuideBrochureSVS Support Information
What's in the Box of ELAC Muro SUB2020?
Here are the items that come with the Muro SUB2020:
Powered subwoofer8-feet AC power cord4 Cone feet2 Brackets2 Machine screws2 Wood screws2 Washers2 Wall anchorsOperating Instructions
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
20 Hz
vs
28 Hz
|
Generates deeper bass |
 High Frequency Response |
270k Hz
vs
200k Hz
|
Generates higher frequency |
 Height |
343mm
vs
399mm
|
Easier to fit in smaller spaces |
 Price per pair* |
600USD
vs
1000USD
|
costs less (*prices may change depending on the seller, location and time) |
 Base Surface Area |
952cm2
vs
1330cm2
|
Takes less floor space |
| General |
SVS SB-1000 Pro |
ELAC Muro SUB2020 |
| Brand |
SVS |
ELAC |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
325 watts |
200 watts |
| Frequency Response |
20-270 Hz |
28-200 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
325-watt RMS |
200-watt RMS |
| Watts Peak (Max) |
820-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
10" |
| Woofer Composition |
Fiber-composite |
Woven Cellulose Fiber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
side or bottom |
Physical Specs |
|
|
| Height |
343.0mm (13.5") |
399.0mm (15.7") |
| Width |
331.0mm (13") |
185.0mm (7.3") |
| Depth |
402.0mm (15.8") |
515.0mm (20.3") |
| Weight |
11.82kg (26lbs) |
12.73kg (28lbs) |
| Enclosure |
Acoustic Suspension |
Acoustic Suspension |
| Available Colors |
Black,White |
n/a |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
1 Year |
| Labor Warranty |
5 Years |
1 Year |