In this review, we will be comparing PC-2000 and RP-1000SW, two Powered Subwoofer speakers from SVS and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of SVS PC-2000 and Klipsch RP-1000SW first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both SVS PC-2000and Klipsch RP-1000SW have a single woofer setup however the SVS PC-2000's woofer is 12-inch whereas the Klipsch RP-1000SW features a 10-inch woofer.
Frequency Response
PC-2000 has a frequency range of 16-260 Hz whereas RP-1000SW has a frequency range of 19-131 Hz. With a minimum frequency of 16Hz, the PC-2000 can go slightly deeper then the RP-1000SW's min frequency of 19Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both SVS PC-2000 and Klipsch RP-1000SW have Bass Reflex type cabinets. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare SVS PC-2000's and Klipsch RP-1000SW's external dimensions. SVS PC-2000 has external dimensions of 872.0 x 422.0 x 422.0mm (34-5/16 x 16-5/8 x 16-5/8inch) whereas Klipsch RP-1000SW has external dimensions of 423.0 x 381.0 x 635.0mm (16-5/8inch x 15inch x 25inch).
Klipsch RP-1000SW is 41mm narrower and 449mm shorter than SVS PC-2000 but it is also 213mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the SVS PC-2000 is approximately 1780.8cm2 / 276.0inch2 and base area of the Klipsch RP-1000SW is approximately 2419.4cm2 / 375.0inch2. The PC-2000 requires 26% less surface area than the RP-1000SW which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The SVS PC-2000 weighs 22.70kg / 49.9lbs and the Klipsch RP-1000SW weighs 25.77kg / 56.7lbs. This makes the RP-1000SW 14% heavier than the PC-2000.
Here is a comparison of how PC-2000 and RP-1000SW's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
16 Hz
vs
19 Hz
|
Generates deeper bass |
 High Frequency Response |
260 Hz
vs
131 Hz
|
Generates higher frequency |
 Base Surface Area |
1780cm2
vs
2419cm2
|
Takes less floor space |
 Price per pair* |
750USD
vs
850USD
|
costs less (*prices may change depending on the seller, location and time) |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 Height |
423mm
vs
872mm
|
Easier to fit in smaller spaces |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Klipsch RP-1000SW needs about 36% more floor area. Klipsch RP-1000SW stands 213mm further into the room. SVS PC-2000 is 449mm taller.
| General |
SVS PC-2000 |
Klipsch Reference Premiere RP-1000SW |
| Brand |
SVS |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
500 watts |
300 watts |
| Frequency Response |
16-260 Hz |
19-131 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
500-watt RMS |
300-watt RMS |
| Watts Peak (Max) |
1100-watt RMS |
600-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
10" |
| Woofer Composition |
Aluminum |
Cerametallic |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
rear |
front |
Physical Specs |
|
|
| Height |
872.0mm (34.3") |
423.0mm (16.7") |
| Width |
422.0mm (16.6") |
381.0mm (15") |
| Depth |
422.0mm (16.6") |
635.0mm (25") |
| Weight |
22.70kg (49.9lbs) |
25.77kg (56.7lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
n/a |
MDF with Vinyl |
| Available Colors |
n/a |
Ebony |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
5 years |
| Labor Warranty |
5 Years |
5 years |
No single best subwoofer here. Your room, where the box can physically go, and whether this is mainly for films or mainly for music will settle it long before the specs do.
| Area | Better | Why |
|---|
| Bass depth | A | SVS PC-2000 goes deeper - 16Hz against 19Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | A | SVS PC-2000 has the bigger amplifier - 500W against 300W RMS, about 2.2dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | SVS PC-2000 moves more air: 12" against 10" is 1.44x the cone area, not the 1.2x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | evenly matched | Both are ported designs, so they roll off in much the same way. |
| Cabinet size | depends | Klipsch RP-1000SW is about 34% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Price | A | SVS PC-2000 costs less - $750 against $850, about 12% less. |
A SVS PC-2000 B Klipsch RP-1000SW
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
SVS PC-2000 is the easier recommendation: it leads on most of the measured areas and costs less. Take Klipsch RP-1000SW if one of the "depends" rows describes your room. If placement is the constraint - a corner, behind a sofa, under a desk - Klipsch RP-1000SW is the one that will actually go there, and a well-placed small subwoofer beats a badly-placed big one every time.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.