In this review, we will be comparing PB-3000 R|Evolution and SB-1000 Pro, two Powered Subwoofer speakers by SVS. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of SVS PB-3000 R|Evolution and SVS SB-1000 Pro first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both SVS PB-3000 R|Evolutionand SVS SB-1000 Pro have a single woofer setup however the SVS PB-3000 R|Evolution's woofer is 13-inch whereas the SVS SB-1000 Pro features a 12-inch woofer.
Frequency Response
PB-3000 R|Evolution has a frequency range of 16-235 Hz whereas SB-1000 Pro has a frequency range of 20-270 Hz. With a minimum frequency of 16Hz, the PB-3000 R|Evolution can go slightly deeper then the SB-1000 Pro's min frequency of 20Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The SVS PB-3000 R|Evolution has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the SVS SB-1000 Pro have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare SVS PB-3000 R|Evolution's and SVS SB-1000 Pro's external dimensions. SVS PB-3000 R|Evolution has external dimensions of 556.0 x 465.0 x 627.0mm (21-7/8 x 18-5/16 x 24-11/16inch) whereas SVS SB-1000 Pro has external dimensions of 343.0 x 331.0 x 402.0mm (13-1/2inch x 13inch x 15-13/16inch).
SVS PB-3000 R|Evolution is clearly the larger of the two speakers. Its body is 134mm wider, 213mm taller and 225mm deeper than SVS SB-1000 Pro.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the SVS PB-3000 R|Evolution is approximately 2915.6cm2 / 451.9inch2 and base area of the SVS SB-1000 Pro is approximately 1330.6cm2 / 206.2inch2. The PB-3000 R|Evolution requires 119% more surface area than the SB-1000 Pro which gives it a small disadvantage on placement in tight spaces.