In this review, we will be comparing PB-3000 R|Evolution and SPL-120, two Powered Subwoofer speakers from SVS and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of SVS PB-3000 R|Evolution and Klipsch SPL-120 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both SVS PB-3000 R|Evolutionand Klipsch SPL-120 have a single woofer setup however the SVS PB-3000 R|Evolution's woofer is 13-inch whereas the Klipsch SPL-120 features a 12-inch woofer.
Frequency Response
PB-3000 R|Evolution has a frequency range of 16-235 Hz whereas SPL-120 has a frequency range of 24-125 Hz. With a minimum frequency of 16Hz, the PB-3000 R|Evolution can go significantly deeper on the low side and provide stronger bass compared to the SPL-120's min frequency of 24Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both SVS PB-3000 R|Evolution and Klipsch SPL-120 have Bass Reflex type cabinets. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare SVS PB-3000 R|Evolution's and Klipsch SPL-120's external dimensions. SVS PB-3000 R|Evolution has external dimensions of 556.0 x 465.0 x 627.0mm (21-7/8 x 18-5/16 x 24-11/16inch) whereas Klipsch SPL-120 has external dimensions of 450.0 x 375.0 x 540.0mm (17-11/16 x 14-3/4 x 21-1/4inch).
SVS PB-3000 R|Evolution is clearly the larger of the two speakers. Its body is 90mm wider, 106mm taller and 87mm deeper than Klipsch SPL-120.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the SVS PB-3000 R|Evolution is approximately 2915.6cm2 / 451.9inch2 and base area of the Klipsch SPL-120 is approximately 2025.0cm2 / 313.9inch2. The PB-3000 R|Evolution requires 44% more surface area than the SPL-120 which gives it a small disadvantage on placement in tight spaces.