In this review, we will be comparing PB-3000 R|Evolution and RP-1200SW, two Powered Subwoofer speakers from SVS and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of SVS PB-3000 R|Evolution and Klipsch RP-1200SW first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both SVS PB-3000 R|Evolutionand Klipsch RP-1200SW have a single woofer setup however the SVS PB-3000 R|Evolution's woofer is 13-inch whereas the Klipsch RP-1200SW features a 12-inch woofer.
Frequency Response
PB-3000 R|Evolution has a frequency range of 16-235 Hz whereas RP-1200SW has a frequency range of 16.5-138 Hz. With a minimum frequency of 16Hz, the PB-3000 R|Evolution can go slightly deeper then the RP-1200SW's min frequency of 17Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both SVS PB-3000 R|Evolution and Klipsch RP-1200SW have Bass Reflex type cabinets. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare SVS PB-3000 R|Evolution's and Klipsch RP-1200SW's external dimensions. SVS PB-3000 R|Evolution has external dimensions of 556.0 x 465.0 x 627.0mm (21-7/8 x 18-5/16 x 24-11/16inch) whereas Klipsch RP-1200SW has external dimensions of 482.0 x 432.0 x 659.0mm (18-15/16inch x 17inch x 25-15/16inch).
Klipsch RP-1200SW is 33mm narrower and 74mm shorter than SVS PB-3000 R|Evolution but it is also 32mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the SVS PB-3000 R|Evolution is approximately 2915.6cm2 / 451.9inch2 and base area of the Klipsch RP-1200SW is approximately 2846.9cm2 / 441.3inch2. The PB-3000 R|Evolution requires 2% more surface area than the RP-1200SW which gives it a small disadvantage on placement in tight spaces.