In this review, we will be comparing PB-3000 R|Evolution and KC62, two Powered Subwoofer speakers from SVS and KEF. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of SVS PB-3000 R|Evolution and KEF KC62 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.SVS PB-3000 R|Evolution and KEF KC62 have a totally different setup: the SVS PB-3000 R|Evolution features 1 x 13-inch drivers whereas the KC62 features 2 x 6.5-inch drivers.
Frequency Response
PB-3000 R|Evolution has a frequency range of 16-235 Hz whereas KC62 has a frequency range of 11-200 Hz. With a minimum frequency of 11Hz, the KC62 can go significantly deeper on the low side and provide stronger bass compared to the PB-3000 R|Evolution's min frequency of 16Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The SVS PB-3000 R|Evolution has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the KEF KC62 have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare SVS PB-3000 R|Evolution's and KEF KC62's external dimensions. SVS PB-3000 R|Evolution has external dimensions of 556.0 x 465.0 x 627.0mm (21-7/8 x 18-5/16 x 24-11/16inch) whereas KEF KC62 has external dimensions of 245.0 x 258.0 x 281.0mm (9-5/8inch x 10-1/8inch x 11-1/16inch).
SVS PB-3000 R|Evolution is clearly the larger of the two speakers. Its body is 207mm wider, 311mm taller and 346mm deeper than KEF KC62.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the SVS PB-3000 R|Evolution is approximately 2915.6cm2 / 451.9inch2 and base area of the KEF KC62 is approximately 725.0cm2 / 112.4inch2. The PB-3000 R|Evolution requires 302% more surface area than the KC62 which gives it a small disadvantage on placement in tight spaces.