In this review, we will be comparing PB-2000 Pro and KUBE 10b, two Powered Subwoofer speakers from SVS and KEF. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of SVS PB-2000 Pro and KEF KUBE 10b first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the SVS PB-2000 Pro and KEF KUBE 10b compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both SVS PB-2000 Proand KEF KUBE 10b have a single woofer setup however the SVS PB-2000 Pro's woofer is 12-inch whereas the KEF KUBE 10b features a 10-inch woofer.
Frequency Response
PB-2000 Pro has a frequency range of 16-290 Hz whereas KUBE 10b has a frequency range of 24-140 Hz. With a minimum frequency of 16Hz, the PB-2000 Pro can go significantly deeper on the low side and provide stronger bass compared to the KUBE 10b's min frequency of 24Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The SVS PB-2000 Pro has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the KEF KUBE 10b have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare SVS PB-2000 Pro's and KEF KUBE 10b's external dimensions. SVS PB-2000 Pro has external dimensions of 534.0 x 442.0 x 609.0mm ( 21 x 17-3/8 x 23-15/16inch) whereas KEF KUBE 10b has external dimensions of 372.0 x 356.0 x 397.0mm ( 14-5/8 x 14 x 15-5/8inch) .
SVS PB-2000 Pro is clearly the larger of the two speakers. Its body is 86mm wider, 162mm taller and 212mm deeper than KEF KUBE 10b.
Below you can see the front view size comparison of SVS PB-2000 Pro and KEF KUBE 10b in scale.
Comparison image of SVS PB-2000 Pro and KEF KUBE 10b Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the SVS PB-2000 Pro is approximately 2691.8cm2 / 417.2inch2 and base area of the KEF KUBE 10b is approximately 1413.3cm2 / 219.1inch2. The PB-2000 Pro requires 90% more surface area than the KUBE 10b which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The SVS PB-2000 Pro weighs 29.45kg / 64.8lbs and the KEF KUBE 10b weighs 17.50kg / 38.5lbs. This makes the PB-2000 Pro 68% heavier than the KUBE 10b.
Here is a comparison of how PB-2000 Pro and KUBE 10b's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of SVS PB-2000 Pro?
Here are the items that are included inside the box of PB-2000 Pro:
Powered subwooferGrille8-feet AC power cordQuick Start GuideSafety InstructionsSVS brochure
What's in the Box of KEF KUBE 10b?
Here are the items that come with the KUBE 10b:
Powered subwoofer6.5-feet AC power cordSpeaker-level input blockUser ManualImportant Safety InformationWarranty Information
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
16 Hz
vs
24 Hz
|
Generates deeper bass |
 High Frequency Response |
290k Hz
vs
140k Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Height |
372mm
vs
534mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1413cm2
vs
2691cm2
|
Takes less floor space |
 Price per pair* |
750USD
vs
1100USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
SVS PB-2000 Pro |
KEF KUBE 10b |
| Brand |
SVS |
KEF |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
550 watts |
300 watts |
| Frequency Response |
16-290 Hz |
24-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
550-watt RMS |
300-watt RMS |
| Watts Peak (Max) |
1500-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
10" |
| Woofer Composition |
Aluminum |
|
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
40-140 Hz |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
534.0mm (21") |
372.0mm (14.6") |
| Width |
442.0mm (17.4") |
356.0mm (14") |
| Depth |
609.0mm (24") |
397.0mm (15.6") |
| Weight |
29.45kg (64.8lbs) |
17.50kg (38.5lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
2 Years |
| Labor Warranty |
5 Years |
2 Years |