In this review, we will be comparing PB-1000 Pro and Debut 2.0 SUB3030, two Powered Subwoofer speakers from SVS and ELAC. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of SVS PB-1000 Pro and ELAC Debut 2.0 SUB3030 first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the SVS PB-1000 Pro and ELAC Debut 2.0 SUB3030 compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.SVS PB-1000 Proand ELAC Debut 2.0 SUB3030 have the same driver set up: Both subwoofers have 1 x 12" drivers.
Frequency Response
PB-1000 Pro has a frequency range of 17-260 Hz whereas Debut 2.0 SUB3030 has a frequency range of 25-150 Hz. With a minimum frequency of 17Hz, the PB-1000 Pro can go significantly deeper on the low side and provide stronger bass compared to the Debut 2.0 SUB3030's min frequency of 25Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The SVS PB-1000 Pro has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the ELAC Debut 2.0 SUB3030 have Passive radiator type enclosure.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare SVS PB-1000 Pro's and ELAC Debut 2.0 SUB3030's external dimensions. SVS PB-1000 Pro has external dimensions of 479.0 x 380.0 x 509.0mm ( 18-13/16inch x 15inch x 20-15/16inch ) whereas ELAC Debut 2.0 SUB3030 has external dimensions of 462.0 x 451.0 x 464.0mm ( 18-3/16 x 17-3/4 x 18-1/4inch) .
ELAC Debut 2.0 SUB3030 is 17mm shorter and 45mm less deeper than SVS PB-1000 Pro but it is also 71mm wider.
Below you can see the front view size comparison of SVS PB-1000 Pro and ELAC Debut 2.0 SUB3030 in scale.
Comparison image of SVS PB-1000 Pro and ELAC Debut 2.0 SUB3030 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the SVS PB-1000 Pro is approximately 1934.2cm2 / 299.8inch2 and base area of the ELAC Debut 2.0 SUB3030 is approximately 2092.6cm2 / 324.4inch2. The PB-1000 Pro requires 8% less surface area than the Debut 2.0 SUB3030 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The SVS PB-1000 Pro weighs 19.30kg / 42.5lbs and the ELAC Debut 2.0 SUB3030 weighs 22.80kg / 50.2lbs. This makes the Debut 2.0 SUB3030 18% heavier than the PB-1000 Pro.
Here is a comparison of how PB-1000 Pro and Debut 2.0 SUB3030's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of SVS PB-1000 Pro?
Here are the items that are included inside the box of PB-1000 Pro:
Powered subwooferGrille6-feet AC power cordQuick Start GuideBrochureSVS Support Information
What's in the Box of ELAC Debut 2.0 SUB3030?
Here are the items that come with the Debut 2.0 SUB3030:
Powered subwoofer9-feet AC power cord4 Spikes4 Hex-nutsOperating Instructions
 Low Frequency Response |
17 Hz
vs
25 Hz
|
Generates deeper bass |
 High Frequency Response |
260k Hz
vs
150k Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Base Surface Area |
1934cm2 (380x509mm)
vs
2092cm2 (451x464mm)
|
Takes less floor space |
 Price per pair* |
799USD
vs
900USD
|
costs less (*prices may change depending on the seller, location and time) |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
 Height |
462mm
vs
479mm
|
Easier to fit in smaller spaces |
| General |
SVS PB-1000 Pro |
ELAC Debut 2.0 SUB3030 |
| Brand |
SVS |
ELAC |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
325 watts |
500 watts |
| Frequency Response |
17-260 Hz |
25-150 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
325-watt RMS |
500-watt RMS |
| Watts Peak (Max) |
820-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
12" |
| Woofer Composition |
Fiber-composite |
Doped Paper |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
479.0mm (18.9") |
462.0mm (18.2") |
| Width |
380.0mm (15") |
451.0mm (17.8") |
| Depth |
509.0mm (20") |
464.0mm (18.3") |
| Weight |
19.30kg (42.5lbs) |
22.80kg (50.2lbs) |
| Enclosure |
Bass Reflex |
Passive radiator |
| Available Colors |
Black |
n/a |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
1 Year |
| Labor Warranty |
5 Years |
1 Year |