In this review, we will be comparing Performa4 B140 and KC92, two Powered Subwoofer speakers from Revel and KEF. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Revel Performa4 B140 and KEF KC92 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Revel Performa4 B140 and KEF KC92 have a totally different setup: the Revel Performa4 B140 features 1 x 10-inch drivers whereas the KC92 features 2 x 9-inch drivers.
Frequency Response
Performa4 B140 has a frequency range of 26-150 Hz whereas KC92 has a frequency range of 11-200 Hz. With a minimum frequency of 11Hz, the KC92 can go significantly deeper on the low side and provide stronger bass compared to the Performa4 B140's min frequency of 26Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Revel Performa4 B140's and KEF KC92's external dimensions. Revel Performa4 B140 has external dimensions of 376.2 x 430.2 x 438.2mm () whereas KEF KC92 has external dimensions of 352.5 x 330 x 360.5 mm (13.88 x 13.00 x 14.19 in).
Revel Performa4 B140 is clearly the larger of the two speakers. Its body is 100.2mm wider, 24.2mm taller and 77.2mm deeper than KEF KC92.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Revel Performa4 B140 needs about 58% more floor or shelf area. Revel Performa4 B140 is 77mm deeper, so it stands that much further out from the wall. Revel Performa4 B140 is 24mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Revel Performa4 B140 is approximately 1885.1cm2 / 292.2inch2 and base area of the KEF KC92 is approximately 1191.3cm2 / 184.7inch2. The Performa4 B140 requires 58% more surface area than the KC92 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Revel Performa4 B140 weighs 27.81kg / 61.2lbs and the KEF KC92 weighs 20.00kg / 44lbs. This makes the Performa4 B140 39% heavier than the KC92.
Here is a comparison of how Performa4 B140 and KC92's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
10 inches
vs
9 inches
|
Larger woofer |
| Number of Woofers |
2
vs
1
|
More woofers |
| Low Frequency Response |
11 Hz
vs
26 Hz
|
Generates deeper bass |
 High Frequency Response |
200 Hz
vs
150 Hz
|
Generates higher frequency |
 Height |
352mm
vs
376mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1191cm2
vs
1885cm2
|
Takes less floor space |
 Price per pair* |
1999USD
vs
3000USD
|
costs less (*prices may change depending on the seller, location and time) |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Revel Performa4 B140 needs about 58% more floor area. Revel Performa4 B140 stands 77mm further into the room. Revel Performa4 B140 is 24mm taller.
| General |
Revel Performa4 B140 |
KEF KC92 |
| Brand |
Revel |
KEF |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Frequency Response |
26-150 Hz |
11-200 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
750-watt RMS |
1000-watt RMS |
| Watts Peak (Max) |
1500-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
2 |
| Woofer Size |
10" |
9" |
| Woofer Composition |
|
Polypropylene |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
40-140 Hz |
Physical Specs |
|
|
| Height |
376.2mm (14.8") |
352.0mm (13.9") |
| Width |
430.2mm (16.9") |
330.0mm (13") |
| Depth |
438.2mm (17.3") |
361.0mm (14.2") |
| Weight |
27.81kg (61.2lbs) |
20.00kg (44lbs) |
| Enclosure |
|
Acoustic Suspension |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 years |
2 Years |
| Labor Warranty |
5 years |
2 Years |
A ported subwoofer against a sealed one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | B | KEF KC92 goes deeper - 11Hz against 26Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | B | KEF KC92 has the bigger amplifier - 1000W against 750W RMS, about 1.2dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | B | KEF KC92 moves more air: 2 x 9" against 10" is 1.62x the cone area, not the 1.27x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | Revel Performa4 B140 is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning; KEF KC92 is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Cabinet size | depends | KEF KC92 is about 41% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | A | Revel Performa4 B140 carries 5 years on parts against 2 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | B | KEF KC92 costs less - $1,999 against $3,000, about 33% less. |
A Revel Performa4 B140 B KEF KC92
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
KEF KC92 is the easier recommendation: it leads on most of the measured areas and costs less. Take Revel Performa4 B140 if one of the "depends" rows describes your room. Films or music? If this is mainly a home cinema, Revel Performa4 B140 will hit harder for the money; if it is mainly for music in a normal-sized room, KEF KC92 is usually the easier one to make sound right. If placement is the constraint - a corner, behind a sofa, under a desk - KEF KC92 is the one that will actually go there, and a well-placed small subwoofer beats a badly-placed big one every time.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.