In this review, we will be comparing Performa3 B110v2 and ASW608, two Powered Subwoofer speakers from Revel and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Revel Performa3 B110v2 and B&W ASW608 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Revel Performa3 B110v2and B&W ASW608 have a single woofer setup however the Revel Performa3 B110v2's woofer is 10-inch whereas the B&W ASW608 features a 8-inch woofer.
Frequency Response
Performa3 B110v2 has a frequency range of 34-150 Hz whereas ASW608 has a frequency range of 32-140 Hz. With a minimum frequency of 32Hz, the ASW608 can go slightly deeper then the Performa3 B110v2's min frequency of 34Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
Both Revel Performa3 B110v2 and B&W ASW608 have Acoustic Suspension type cabinets. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Revel Performa3 B110v2's and B&W ASW608's external dimensions. Revel Performa3 B110v2 has external dimensions of 429.0 x 364.0 x 393.0mm (16-7/8inch x 14-5/16inch x 15-7/16inch) whereas B&W ASW608 has external dimensions of 272.0 x 261.0 x 350.0mm (10-11/16 x 10-1/4 x 13-3/4inch).
Revel Performa3 B110v2 is clearly the larger of the two speakers. Its body is 103mm wider, 157mm taller and 43mm deeper than B&W ASW608.
Below you can see the front view size comparison of Revel Performa3 B110v2 and B&W ASW608 in scale.
Comparison image of Revel Performa3 B110v2 and B&W ASW608 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Revel Performa3 B110v2 is approximately 1430.5cm2 / 221.7inch2 and base area of the B&W ASW608 is approximately 913.5cm2 / 141.6inch2. The Performa3 B110v2 requires 57% more surface area than the ASW608 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Revel Performa3 B110v2 weighs 24.45kg / 53.8lbs and the B&W ASW608 weighs 8.86kg / 19.5lbs. This makes the Performa3 B110v2 176% heavier than the ASW608.
Here is a comparison of how Performa3 B110v2 and ASW608's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Revel Performa3 B110v2?
Here are the items that are included inside the box of Performa3 B110v2:
- Powered subwoofer
- 6-feet AC power cord
- Grille
- 4 Spike feet
- Owners Manual
What's in the Box of B&W ASW608?
Here are the items that come with the ASW608:
- Powered subwoofer
- Grille
- 6.5-feet AC power cord
- 4 Rubber feet
- 4 Spike feet
- 4 Lock-nuts
- Manual
- Bowers & Wilkins brochure
- Warranty Information
 Woofer Size |
10 inches
vs
8 inches
|
Larger woofer |
 High Frequency Response |
150 Hz
vs
140 Hz
|
Generates higher frequency |
| Low Frequency Response |
32 Hz
vs
34 Hz
|
Generates deeper bass |
 Height |
272mm
vs
429mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
913cm2
vs
1430cm2
|
Takes less floor space |
 Price per pair* |
599USD
vs
1925USD
|
costs less (*prices may change depending on the seller, location and time) |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Revel Performa3 B110v2 needs about 57% more floor area. Revel Performa3 B110v2 stands 43mm further into the room. Revel Performa3 B110v2 is 157mm taller.
| General |
Revel Performa3 B110v2 |
Bowers & Wilkins ASW608 |
| Brand |
Revel |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
1000 watts |
200 watts |
| Frequency Response |
34-150 Hz |
32-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
1000-watt RMS |
200-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
8" |
| Woofer Composition |
Coated Paper/Pulp |
Paper/Aramid Fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
429.0mm (16.9") |
272.0mm (10.7") |
| Width |
364.0mm (14.3") |
261.0mm (10.3") |
| Depth |
393.0mm (15.5") |
350.0mm (13.8") |
| Weight |
24.45kg (53.8lbs) |
8.86kg (19.5lbs) |
| Enclosure |
Acoustic Suspension |
Acoustic Suspension |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
2 Years |
| Labor Warranty |
5 Years |
2 Years |
Different price classes - Revel Performa3 B110v2 costs roughly 3.2x what B&W ASW608 does. Before paying it, read the note below about two smaller subwoofers.
| Area | Better | Why |
|---|
| Bass depth | evenly matched | Effectively the same reach (34Hz vs 32Hz). |
| Amplifier power | A | Revel Performa3 B110v2 has the bigger amplifier - 1000W against 200W RMS, about 7dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | Revel Performa3 B110v2 moves more air: 10" against 8" is 1.56x the cone area, not the 1.25x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | evenly matched | Both are sealed designs, so they roll off in much the same way. |
| Speaker-level inputs | B | B&W ASW608 takes a speaker-level connection as well as line level. That is what lets it work with an integrated amplifier or a vintage receiver that has no subwoofer output at all. |
| Cabinet size | depends | B&W ASW608 is about 60% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | A | Revel Performa3 B110v2 carries 5 years on parts against 2 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | B | B&W ASW608 costs less - $599 against $1,925, about 69% less. |
A Revel Performa3 B110v2 B B&W ASW608
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: Revel Performa3 B110v2 measures better, B&W ASW608 costs about 69% less. In a normal room, placement will make a bigger difference than the gap between these two. Check your amplifier first: if it has no subwoofer or preamp output, B&W ASW608 is the only one of these two you can connect at all. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $599 each, two B&W ASW608 cost about $1,198 against $1,925 for one of the other, which is worth a thought.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.