In this review, we will be comparing No.35 and KUBE 10b, two Powered Subwoofer speakers from REL and KEF. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of REL No.35 and KEF KUBE 10b first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both REL No.35and KEF KUBE 10b have a single woofer setup however the REL No.35's woofer is 12-inch whereas the KEF KUBE 10b features a 10-inch woofer.
Frequency Response
No.35 has a frequency range of 17 Hz (-6dB, in room) whereas KUBE 10b has a frequency range of 24-140 Hz. With a minimum frequency of 17Hz, the No.35 can go significantly deeper on the low side and provide stronger bass compared to the KUBE 10b's min frequency of 24Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The REL No.35 has a Sealed type cabinet. On the other hand the KEF KUBE 10b have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare REL No.35's and KEF KUBE 10b's external dimensions. REL No.35 has external dimensions of 435.0 x 638.0 x 724.0mm (17-1/8 x 25-1/8 x 28-1/2inch) whereas KEF KUBE 10b has external dimensions of 372.0 x 356.0 x 397.0mm (14-5/8 x 14 x 15-5/8inch).
REL No.35 is clearly the larger of the two speakers. Its body is 282mm wider, 63mm taller and 327mm deeper than KEF KUBE 10b.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
REL No.35 needs about 227% more floor or shelf area. REL No.35 is 327mm deeper, so it stands that much further out from the wall. REL No.35 is 63mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the REL No.35 is approximately 4619.1cm2 / 716.0inch2 and base area of the KEF KUBE 10b is approximately 1413.3cm2 / 219.1inch2. The No.35 requires 227% more surface area than the KUBE 10b which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The REL No.35 weighs 59.00kg / 129.8lbs and the KEF KUBE 10b weighs 17.50kg / 38.5lbs. This makes the No.35 237% heavier than the KUBE 10b.
Here is a comparison of how No.35 and KUBE 10b's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of REL No.35?
Here are the items that are included inside the box of No.35:
- Subwoofer
- Grille
- 6 ft AC power cord
- 32 ft Neutrik Speakon cable
- User manual and warranty information
- Reference remote
- 2 AAA batteries
What's in the Box of KEF KUBE 10b?
Here are the items that come with the KUBE 10b:
- Powered subwoofer
- 6.5-feet AC power cord
- Speaker-level input block
- User Manual
- Important Safety Information
- Warranty Information
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
17 Hz
vs
24 Hz
|
Generates deeper bass |
 Handheld Remote |
Yes
vs
No
|
Control the speaker by the included RC |
 High Frequency Response |
140 Hz
vs
Hz
|
Generates higher frequency |
 Height |
372mm
vs
435mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1413cm2
vs
4619cm2
|
Takes less floor space |
 Price per pair* |
750USD
vs
10000USD
|
costs less (*prices may change depending on the seller, location and time) |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
REL No.35 needs about 227% more floor area. REL No.35 stands 327mm further into the room. REL No.35 is 63mm taller.
| General |
REL No.35 |
KEF KUBE 10b |
| Brand |
REL |
KEF |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
900 watts |
300 watts |
| Frequency Response |
17 Hz (-6dB, in room) |
24-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
900-watt RMS |
300-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
10" |
| Woofer Composition |
Carbon fibre |
|
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
40-140 Hz |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
435.0mm (17.1") |
372.0mm (14.6") |
| Width |
638.0mm (25.1") |
356.0mm (14") |
| Depth |
724.0mm (28.5") |
397.0mm (15.6") |
| Weight |
59.00kg (129.8lbs) |
17.50kg (38.5lbs) |
| Enclosure |
Sealed |
Acoustic Suspension |
| Finish |
Piano Black Lacquer, 12 coats |
n/a |
| Available Colors |
Black |
n/a |
| Grille |
Yes |
n/a |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
|
2 Years |
| Labor Warranty |
|
2 Years |
Different price classes - REL No.35 costs roughly 13.3x what KEF KUBE 10b does. Before paying it, read the note below about two smaller subwoofers.
| Area | Better | Why |
|---|
| Bass depth | A | REL No.35 goes deeper - 17Hz against 24Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | A | REL No.35 has the bigger amplifier - 900W against 300W RMS, about 4.8dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | REL No.35 moves more air: 12" against 10" is 1.44x the cone area, not the 1.2x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | evenly matched | Both are sealed designs, so they roll off in much the same way. |
| Speaker-level inputs | A | REL No.35 takes a speaker-level connection as well as line level. That is what lets it work with an integrated amplifier or a vintage receiver that has no subwoofer output at all. |
| Cabinet size | depends | KEF KUBE 10b is about 74% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Price | B | KEF KUBE 10b costs less - $750 against $10,000, about 93% less. |
A REL No.35 B KEF KUBE 10b
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: REL No.35 measures better, KEF KUBE 10b costs about 93% less. In a normal room, placement will make a bigger difference than the gap between these two. Check your amplifier first: if it has no subwoofer or preamp output, REL No.35 is the only one of these two you can connect at all. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $750 each, two KEF KUBE 10b cost about $1,500 against $10,000 for one of the other, which is worth a thought.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.