In this review, we will be comparing HT 1205 MKII and KC62, two Powered Subwoofer speakers from REL and KEF. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of REL HT 1205 MKII and KEF KC62 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.REL HT 1205 MKII and KEF KC62 have a totally different setup: the REL HT 1205 MKII features 1 x 12-inch drivers whereas the KC62 features 2 x 6.5-inch drivers.
Frequency Response
HT 1205 MKII has a frequency range of 22-200 Hz whereas KC62 has a frequency range of 11-200 Hz. With a minimum frequency of 11Hz, the KC62 can go significantly deeper on the low side and provide stronger bass compared to the HT 1205 MKII's min frequency of 22Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare REL HT 1205 MKII's and KEF KC62's external dimensions. REL HT 1205 MKII has external dimensions of 387.4 x 412.8 x 485.8mm () whereas KEF KC62 has external dimensions of 245.0 x 258.0 x 281.0mm (9-5/8inch x 10-1/8inch x 11-1/16inch).
REL HT 1205 MKII is clearly the larger of the two speakers. Its body is 154.8mm wider, 142.4mm taller and 204.8mm deeper than KEF KC62.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the REL HT 1205 MKII is approximately 2005.4cm2 / 310.8inch2 and base area of the KEF KC62 is approximately 725.0cm2 / 112.4inch2. The HT 1205 MKII requires 177% more surface area than the KC62 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The REL HT 1205 MKII weighs 19.60kg / 43.1lbs and the KEF KC62 weighs 14.05kg / 30.9lbs. This makes the HT 1205 MKII 40% heavier than the KC62.
Here is a comparison of how HT 1205 MKII and KC62's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
12 inches
vs
6.5 inches
|
Larger woofer |
 Price per pair* |
899USD
vs
1500USD
|
costs less (*prices may change depending on the seller, location and time) |
| Number of Woofers |
2
vs
1
|
More woofers |
| Low Frequency Response |
11 Hz
vs
22 Hz
|
Generates deeper bass |
 Height |
245mm
vs
387mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
725cm2
vs
2005cm2
|
Takes less floor space |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
REL HT 1205 MKII needs about 177% more floor area. REL HT 1205 MKII stands 205mm further into the room. REL HT 1205 MKII is 142mm taller.
| General |
REL HT 1205 MKII |
KEF KC62 |
| Brand |
REL |
KEF |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Frequency Response |
22-200 Hz |
11-200 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
500-watt RMS |
1000-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
2 |
| Woofer Size |
12" |
6.5" |
| Woofer Composition |
|
|
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
side |
Physical Specs |
|
|
| Height |
387.4mm (15.3") |
245.0mm (9.6") |
| Width |
412.8mm (16.3") |
258.0mm (10.2") |
| Depth |
485.8mm (19.1") |
281.0mm (11.1") |
| Weight |
19.60kg (43.1lbs) |
14.05kg (30.9lbs) |
| Enclosure |
|
Acoustic Suspension |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
3 Years |
2 Years |
| Labor Warranty |
3 Years |
2 Years |
Two quite different sizes of subwoofer. Room volume decides this more than anything else on the page: a big driver in a small room is wasted, and a small one in a large room is worked to death.
| Area | Better | Why |
|---|
| Bass depth | B | KEF KC62 goes deeper - 11Hz against 22Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | B | KEF KC62 has the bigger amplifier - 1000W against 500W RMS, about 3dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | REL HT 1205 MKII moves more air: 12" against 2 x 6.5" is 1.7x the cone area, not the 1.31x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | evenly matched | Both are sealed designs, so they roll off in much the same way. |
| Cabinet size | depends | KEF KC62 is about 77% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | A | REL HT 1205 MKII carries 3 years on parts against 2 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | A | REL HT 1205 MKII costs less - $899 against $1,500, about 40% less. |
A REL HT 1205 MKII B KEF KC62
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Neither runs away with it - they trade advantages. Let your room size and where the box can actually stand settle it. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $899 each, two REL HT 1205 MKII cost about $1,798 against $1,500 for one of the other, which is worth a thought. If placement is the constraint - a corner, behind a sofa, under a desk - KEF KC62 is the one that will actually go there, and a well-placed small subwoofer beats a badly-placed big one every time.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.