In this review, we will be comparing HT 1205 MKII and SuperCube 4000, two Powered Subwoofer speakers from REL and Definitive Technology. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of REL HT 1205 MKII and DT SuperCube 4000 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both REL HT 1205 MKIIand DT SuperCube 4000 have a single woofer setup however the REL HT 1205 MKII's woofer is 12-inch whereas the DT SuperCube 4000 features a 8-inch woofer.
Frequency Response
HT 1205 MKII has a frequency range of 22-200 Hz whereas SuperCube 4000 has a frequency range of 16-200 Hz. With a minimum frequency of 16Hz, the SuperCube 4000 can go significantly deeper on the low side and provide stronger bass compared to the HT 1205 MKII's min frequency of 22Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare REL HT 1205 MKII's and DT SuperCube 4000's external dimensions. REL HT 1205 MKII has external dimensions of 387.4 x 412.8 x 485.8mm () whereas DT SuperCube 4000 has external dimensions of 302.0 x 281.0 x 318.0mm (11-7/8 x 11-1/16 x 12-1/2inch).
REL HT 1205 MKII is clearly the larger of the two speakers. Its body is 131.8mm wider, 85.4mm taller and 167.8mm deeper than DT SuperCube 4000.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the REL HT 1205 MKII is approximately 2005.4cm2 / 310.8inch2 and base area of the DT SuperCube 4000 is approximately 893.6cm2 / 138.5inch2. The HT 1205 MKII requires 124% more surface area than the SuperCube 4000 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The REL HT 1205 MKII weighs 19.60kg / 43.1lbs and the DT SuperCube 4000 weighs 11.36kg / 25lbs. This makes the HT 1205 MKII 73% heavier than the SuperCube 4000.
Here is a comparison of how HT 1205 MKII and SuperCube 4000's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
12 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
16 Hz
vs
22 Hz
|
Generates deeper bass |
 Height |
302mm
vs
387mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
893cm2
vs
2005cm2
|
Takes less floor space |
 Price per pair* |
799USD
vs
899USD
|
costs less (*prices may change depending on the seller, location and time) |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
REL HT 1205 MKII needs about 124% more floor area. REL HT 1205 MKII stands 168mm further into the room. REL HT 1205 MKII is 85mm taller.
| General |
REL HT 1205 MKII |
Definitive Technology SuperCube 4000 |
| Brand |
REL |
Definitive Technology |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Frequency Response |
22-200 Hz |
16-200 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
500-watt RMS |
1200-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
8" |
| Woofer Composition |
|
|
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
40-150 Hz and 40-150 Hz |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
387.4mm (15.3") |
302.0mm (11.9") |
| Width |
412.8mm (16.3") |
281.0mm (11.1") |
| Depth |
485.8mm (19.1") |
318.0mm (12.5") |
| Weight |
19.60kg (43.1lbs) |
11.36kg (25lbs) |
| Enclosure |
|
Passive Radiator |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
3 Years |
3 Years |
| Labor Warranty |
3 Years |
3 Years |
A sealed subwoofer against a passive radiator one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | B | DT SuperCube 4000 goes deeper - 16Hz against 22Hz. Under 20Hz is felt more than heard - the bottom of a pipe organ and the bottom of a film mix. |
| Amplifier power | B | DT SuperCube 4000 has the bigger amplifier - 1200W against 500W RMS, about 3.8dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | REL HT 1205 MKII moves more air: 12" against 8" is 2.25x the cone area, not the 1.5x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | REL HT 1205 MKII is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room; DT SuperCube 4000 is passive radiator - a passive radiator behaves like a port without the pipe noise, and suits a slim cabinet. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Cabinet size | depends | DT SuperCube 4000 is about 65% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Price | B | DT SuperCube 4000 costs less - $799 against $899, about 11% less. |
A REL HT 1205 MKII B DT SuperCube 4000
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
DT SuperCube 4000 has the edge on paper, though not by much. The "depends" rows are more likely to decide this than the score is. Films or music? If this is mainly a home cinema, DT SuperCube 4000 will hit harder for the money; if it is mainly for music in a normal-sized room, REL HT 1205 MKII is usually the easier one to make sound right. If placement is the constraint - a corner, behind a sofa, under a desk - DT SuperCube 4000 is the one that will actually go there, and a well-placed small subwoofer beats a badly-placed big one every time.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.