In this review, we will be comparing HT 1205 MKII and ASW610, two Powered Subwoofer speakers from REL and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of REL HT 1205 MKII and B&W ASW610 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both REL HT 1205 MKIIand B&W ASW610 have a single woofer setup however the REL HT 1205 MKII's woofer is 12-inch whereas the B&W ASW610 features a 10-inch woofer.
Frequency Response
HT 1205 MKII has a frequency range of 22-200 Hz whereas ASW610 has a frequency range of 27-140 Hz. With a minimum frequency of 22Hz, the HT 1205 MKII can go significantly deeper on the low side and provide stronger bass compared to the ASW610's min frequency of 27Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare REL HT 1205 MKII's and B&W ASW610's external dimensions. REL HT 1205 MKII has external dimensions of 387.4 x 412.8 x 485.8mm () whereas B&W ASW610 has external dimensions of 321.0 x 312.0 x 394.0mm (12-5/8 x 12-1/4 x 15-1/2inch).
REL HT 1205 MKII is clearly the larger of the two speakers. Its body is 100.8mm wider, 66.4mm taller and 91.8mm deeper than B&W ASW610.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the REL HT 1205 MKII is approximately 2005.4cm2 / 310.8inch2 and base area of the B&W ASW610 is approximately 1229.3cm2 / 190.5inch2. The HT 1205 MKII requires 63% more surface area than the ASW610 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The REL HT 1205 MKII weighs 19.60kg / 43.1lbs and the B&W ASW610 weighs 12.55kg / 27.6lbs. This makes the HT 1205 MKII 56% heavier than the ASW610.
Here is a comparison of how HT 1205 MKII and ASW610's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
22 Hz
vs
27 Hz
|
Generates deeper bass |
 High Frequency Response |
200 Hz
vs
140 Hz
|
Generates higher frequency |
 Height |
321mm
vs
387mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1229cm2
vs
2005cm2
|
Takes less floor space |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
REL HT 1205 MKII needs about 63% more floor area. REL HT 1205 MKII stands 92mm further into the room. REL HT 1205 MKII is 66mm taller.
| General |
REL HT 1205 MKII |
Bowers & Wilkins ASW610 |
| Brand |
REL |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Frequency Response |
22-200 Hz |
27-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
500-watt RMS |
200-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
10" |
| Woofer Composition |
|
Paper/Aramid Fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
387.4mm (15.3") |
321.0mm (12.6") |
| Width |
412.8mm (16.3") |
312.0mm (12.3") |
| Depth |
485.8mm (19.1") |
394.0mm (15.5") |
| Weight |
19.60kg (43.1lbs) |
12.55kg (27.6lbs) |
| Enclosure |
|
Acoustic Suspension |
| Grille |
n/a |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
3 Years |
2 Years |
| Labor Warranty |
3 Years |
2 Years |
No single best subwoofer here. Your room, where the box can physically go, and whether this is mainly for films or mainly for music will settle it long before the specs do.
| Area | Better | Why |
|---|
| Bass depth | A | REL HT 1205 MKII goes deeper - 22Hz against 27Hz. A real difference, though most music has little content below 27Hz. |
| Amplifier power | A | REL HT 1205 MKII has the bigger amplifier - 500W against 200W RMS, about 4dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | REL HT 1205 MKII moves more air: 12" against 10" is 1.44x the cone area, not the 1.2x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | evenly matched | Both are sealed designs, so they roll off in much the same way. |
| Cabinet size | depends | B&W ASW610 is about 49% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | A | REL HT 1205 MKII carries 3 years on parts against 2 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | evenly matched | Priced within a few per cent of each other. |
A REL HT 1205 MKII B B&W ASW610
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
REL HT 1205 MKII has the edge on paper, though not by much. The "depends" rows are more likely to decide this than the score is. If placement is the constraint - a corner, behind a sofa, under a desk - B&W ASW610 is the one that will actually go there, and a well-placed small subwoofer beats a badly-placed big one every time.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.