In this review, we will be comparing Q SUB120 and RP-1200SW, two Powered Subwoofer speakers from Q Acoustics and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Q Acoustics Q SUB120 and Klipsch RP-1200SW first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Q Acoustics Q SUB120 and Klipsch RP-1200SW compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Q Acoustics Q SUB120and Klipsch RP-1200SW have the same driver set up: Both subwoofers have 1 x 12" drivers.
Frequency Response
Q SUB120 has a frequency range of 28-250 Hz whereas RP-1200SW has a frequency range of 16.5-138 Hz. With a minimum frequency of 17Hz, the RP-1200SW can go significantly deeper on the low side and provide stronger bass compared to the Q SUB120's min frequency of 28Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Q Acoustics Q SUB120 has a Infinite Baffle type cabinet. On the other hand the Klipsch RP-1200SW have Bass Reflex type enclosure. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Q Acoustics Q SUB120's and Klipsch RP-1200SW's external dimensions. Q Acoustics Q SUB120 has external dimensions of 400.0 x 400.0 x 432.0mm ( 15-3/4 x 15-3/4 x 17inch) whereas Klipsch RP-1200SW has external dimensions of 482.0 x 432.0 x 659.0mm ( 18-15/16inch x 17inch x 25-15/16inch ) .
Klipsch RP-1200SW is clearly the larger of the two speakers. Its body is 32mm wider, 82mm taller and 227mm deeper than Q Acoustics Q SUB120.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Q Acoustics Q SUB120 is approximately 1728.0cm2 / 267.8inch2 and base area of the Klipsch RP-1200SW is approximately 2846.9cm2 / 441.3inch2. The Q SUB120 requires 39% less surface area than the RP-1200SW which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Q Acoustics Q SUB120 weighs 22.50kg / 49.5lbs and the Klipsch RP-1200SW weighs 31.18kg / 68.6lbs. This makes the RP-1200SW 39% heavier than the Q SUB120.
Here is a comparison of how Q SUB120 and RP-1200SW's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 High Frequency Response |
250k Hz
vs
138k Hz
|
Generates higher frequency |
 Height |
400mm
vs
482mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1728cm2
vs
2846cm2
|
Takes less floor space |
 Price per pair* |
799USD
vs
999USD
|
costs less (*prices may change depending on the seller, location and time) |
 Low Frequency Response |
17 Hz
vs
28 Hz
|
Generates deeper bass |
| General |
Q Acoustics Q SUB120 |
Klipsch Reference Premiere RP-1200SW |
| Brand |
Q Acoustics |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
300 watts |
400 watts |
| Frequency Response |
28-250 Hz |
16.5-138 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
300-watt RMS |
400-watt RMS |
| Watts Peak (Max) |
600-watt RMS |
800-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
12" |
| Woofer Composition |
Paper composite |
Cerametallic |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
400.0mm (15.7") |
482.0mm (19") |
| Width |
400.0mm (15.7") |
432.0mm (17") |
| Depth |
432.0mm (17") |
659.0mm (25.9") |
| Weight |
22.50kg (49.5lbs) |
31.18kg (68.6lbs) |
| Enclosure |
Infinite Baffle |
Bass Reflex |
| Finish |
n/a |
MDF with Vinyl |
| Available Colors |
n/a |
Ebony |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
5 years |
| Labor Warranty |
5 Years |
5 years |