In this review, we will be comparing Q SUB120 and ASW610, two Powered Subwoofer speakers from Q Acoustics and Bowers Wilkins. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Q Acoustics Q SUB120 and B&W ASW610 first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Q Acoustics Q SUB120and B&W ASW610 have a single woofer setup however the Q Acoustics Q SUB120's woofer is 12-inch whereas the B&W ASW610 features a 10-inch woofer.
Frequency Response
Q SUB120 has a frequency range of 28-250 Hz whereas ASW610 has a frequency range of 27-140 Hz. With a minimum frequency of 27Hz, the ASW610 can go slightly deeper then the Q SUB120's min frequency of 28Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Q Acoustics Q SUB120 has a Infinite Baffle type cabinet. On the other hand the B&W ASW610 have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Q Acoustics Q SUB120's and B&W ASW610's external dimensions. Q Acoustics Q SUB120 has external dimensions of 400.0 x 400.0 x 432.0mm (15-3/4 x 15-3/4 x 17inch) whereas B&W ASW610 has external dimensions of 321.0 x 312.0 x 394.0mm (12-5/8 x 12-1/4 x 15-1/2inch).
Q Acoustics Q SUB120 is clearly the larger of the two speakers. Its body is 88mm wider, 79mm taller and 38mm deeper than B&W ASW610.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Q Acoustics Q SUB120 needs about 41% more floor or shelf area. Q Acoustics Q SUB120 is 38mm deeper, so it stands that much further out from the wall. Q Acoustics Q SUB120 is 79mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Q Acoustics Q SUB120 is approximately 1728.0cm2 / 267.8inch2 and base area of the B&W ASW610 is approximately 1229.3cm2 / 190.5inch2. The Q SUB120 requires 41% more surface area than the ASW610 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Q Acoustics Q SUB120 weighs 22.50kg / 49.5lbs and the B&W ASW610 weighs 12.55kg / 27.6lbs. This makes the Q SUB120 79% heavier than the ASW610.
Here is a comparison of how Q SUB120 and ASW610's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
 High Frequency Response |
250 Hz
vs
140 Hz
|
Generates higher frequency |
 Price per pair* |
799USD
vs
899USD
|
costs less (*prices may change depending on the seller, location and time) |
| Low Frequency Response |
27 Hz
vs
28 Hz
|
Generates deeper bass |
 Height |
321mm
vs
400mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1229cm2
vs
1728cm2
|
Takes less floor space |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Q Acoustics Q SUB120 needs about 41% more floor area. Q Acoustics Q SUB120 stands 38mm further into the room. Q Acoustics Q SUB120 is 79mm taller.
| General |
Q Acoustics Q SUB120 |
Bowers & Wilkins ASW610 |
| Brand |
Q Acoustics |
Bowers Wilkins |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
300 watts |
200 watts |
| Frequency Response |
28-250 Hz |
27-140 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
300-watt RMS |
200-watt RMS |
| Watts Peak (Max) |
600-watt RMS |
n/a |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
10" |
| Woofer Composition |
Paper composite |
Paper/Aramid Fiber |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
400.0mm (15.7") |
321.0mm (12.6") |
| Width |
400.0mm (15.7") |
312.0mm (12.3") |
| Depth |
432.0mm (17") |
394.0mm (15.5") |
| Weight |
22.50kg (49.5lbs) |
12.55kg (27.6lbs) |
| Enclosure |
Infinite Baffle |
Acoustic Suspension |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
2 Years |
| Labor Warranty |
5 Years |
2 Years |
No single best subwoofer here. Your room, where the box can physically go, and whether this is mainly for films or mainly for music will settle it long before the specs do.
| Area | Better | Why |
|---|
| Bass depth | evenly matched | Effectively the same reach (28Hz vs 27Hz). |
| Amplifier power | A | Q Acoustics Q SUB120 has the bigger amplifier - 300W against 200W RMS, about 1.8dB more on tap. In a large room that is headroom before the DSP starts limiting. |
| Driver area | A | Q Acoustics Q SUB120 moves more air: 12" against 10" is 1.44x the cone area, not the 1.2x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | evenly matched | Both are sealed designs, so they roll off in much the same way. |
| Cabinet size | depends | B&W ASW610 is about 43% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | A | Q Acoustics Q SUB120 carries 5 years on parts against 2 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | A | Q Acoustics Q SUB120 costs less - $799 against $899, about 11% less. |
A Q Acoustics Q SUB120 B B&W ASW610
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Q Acoustics Q SUB120 is the easier recommendation: it leads on most of the measured areas and costs less. Take B&W ASW610 if one of the "depends" rows describes your room. If placement is the constraint - a corner, behind a sofa, under a desk - B&W ASW610 is the one that will actually go there, and a well-placed small subwoofer beats a badly-placed big one every time.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.