In this review, we will be comparing 3060S and R-101SW, two Powered Subwoofer speakers from Q Acoustics and Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Q Acoustics 3060S and Klipsch R-101SW first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Q Acoustics 3060Sand Klipsch R-101SW have a single woofer setup however the Q Acoustics 3060S's woofer is 8-inch whereas the Klipsch R-101SW features a 10-inch woofer.
Frequency Response
3060S has a frequency range of 35-250 Hz whereas R-101SW has a frequency range of 29.5-160 Hz. With a minimum frequency of 30Hz, the R-101SW can go significantly deeper on the low side and provide stronger bass compared to the 3060S's min frequency of 35Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Q Acoustics 3060S has a Infinite Baffle type cabinet. On the other hand the Klipsch R-101SW have Bass Reflex type enclosure. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Q Acoustics 3060S's and Klipsch R-101SW's external dimensions. Q Acoustics 3060S has external dimensions of 324.0 x 480.0 x 155.0mm (12-3/4 x 18-7/8 x 6-1/8inch) whereas Klipsch R-101SW has external dimensions of 370.0 x 358.0 x 529.0mm (14-9/16inch x 14-1/16inch x 20-13/16inch).
Q Acoustics 3060S is 46mm shorter and 374mm less deeper than Klipsch R-101SW but it is also 122mm wider.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Klipsch R-101SW needs about 155% more floor or shelf area. Klipsch R-101SW is 374mm deeper, so it stands that much further out from the wall. Klipsch R-101SW is 46mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Q Acoustics 3060S is approximately 744.0cm2 / 115.3inch2 and base area of the Klipsch R-101SW is approximately 1893.8cm2 / 293.5inch2. The 3060S requires 61% less surface area than the R-101SW which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Q Acoustics 3060S weighs 8.50kg / 18.7lbs and the Klipsch R-101SW weighs 13.91kg / 30.6lbs. This makes the R-101SW 64% heavier than the 3060S.
Here is a comparison of how 3060S and R-101SW's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
 High Frequency Response |
250 Hz
vs
160 Hz
|
Generates higher frequency |
 Height |
324mm
vs
370mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
744cm2
vs
1893cm2
|
Takes less floor space |
 Price per pair* |
299USD
vs
499USD
|
costs less (*prices may change depending on the seller, location and time) |
 Woofer Size |
10 inches
vs
8 inches
|
Larger woofer |
| Low Frequency Response |
30 Hz
vs
35 Hz
|
Generates deeper bass |
Size, drawn to scale
Both subwoofers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same floor and pushed back to the same wall, so the bigger one visibly takes more of the room.
Klipsch R-101SW needs about 155% more floor area. Klipsch R-101SW stands 374mm further into the room. Klipsch R-101SW is 46mm taller.
| General |
Q Acoustics 3060S |
Klipsch Reference R-101SW |
| Brand |
Q Acoustics |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
150 watts |
150 watts |
| Frequency Response |
35-250 Hz |
29.5-160 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
150-watt RMS |
150-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
8" |
10" |
| Woofer Composition |
Paper composite |
Spun-Copper TCP |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
n/a |
front |
Physical Specs |
|
|
| Height |
324.0mm (12.8") |
370.0mm (14.6") |
| Width |
480.0mm (18.9") |
358.0mm (14.1") |
| Depth |
155.0mm (6.1") |
529.0mm (20.8") |
| Weight |
8.50kg (18.7lbs) |
13.91kg (30.6lbs) |
| Enclosure |
Infinite Baffle |
Bass Reflex |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
2 Years |
| Labor Warranty |
5 Years |
2 Years |
A sealed subwoofer against a ported one. That is the most consequential line on this page: it decides how the bass rolls off, how it behaves in a small room, and how much output you get for the size of the box.
| Area | Better | Why |
|---|
| Bass depth | B | Klipsch R-101SW goes deeper - 30Hz against 35Hz. A real difference, though most music has little content below 35Hz. |
| Amplifier power | evenly matched | Much the same amplifier (150W vs 150W RMS) - under 1dB apart. |
| Driver area | B | Klipsch R-101SW moves more air: 10" against 8" is 1.56x the cone area, not the 1.25x the diameters suggest. More area means the same output with less excursion, and less distortion with it. |
| Enclosure | depends | Q Acoustics 3060S is sealed - a sealed box rolls off gently and is usually the easier one to integrate in a small or awkward room; Klipsch R-101SW is ported - a ported box gives more output low down for its size, at the cost of a steeper roll-off below tuning. Neither is better in the abstract; ported tends to suit films and sealed tends to suit music, and both generalisations have exceptions. |
| Cabinet size | depends | Q Acoustics 3060S is about 66% smaller by volume. In a subwoofer that is a real trade rather than a preference: box volume is how you get output low down without a bigger amplifier. |
| Warranty | A | Q Acoustics 3060S carries 5 years on parts against 2 years. A subwoofer amplifier works harder than anything else in the system, so this is not a throwaway line. |
| Price | A | Q Acoustics 3060S costs less - $299 against $499, about 40% less. |
A Q Acoustics 3060S B Klipsch R-101SW
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both subwoofers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Klipsch R-101SW is ahead, but on only 1 of the measured areas, and it costs about 67% more. Q Acoustics 3060S is the sensible buy unless your room is large enough to need the extra. Films or music? If this is mainly a home cinema, Klipsch R-101SW will hit harder for the money; if it is mainly for music in a normal-sized room, Q Acoustics 3060S is usually the easier one to make sound right. Two small subwoofers beat one big one in most rooms - a pair evens out the room modes in a way no single box can, whatever its specs. At $299 each, two Q Acoustics 3060S cost about $598 against $499 for one of the other, which is worth a thought.
One thing outweighs everything above: where the subwoofer stands. Room modes can add or remove 10dB or more at a given seat, which is far larger than any difference on this page. Before spending more, try the sub in two or three positions - the crawl test, where you put it in the listening seat and crawl the room to find where the bass sounds best, costs nothing and usually beats an upgrade.