In this review, we will be comparing Elite ES10 and SB-1000 Pro, two Powered Subwoofer speakers from Polk Audio and SVS. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Polk Signature Elite ES10 and SVS SB-1000 Pro first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Polk Signature Elite ES10 and SVS SB-1000 Pro compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Polk Signature Elite ES10and SVS SB-1000 Pro have a single woofer setup however the Polk Signature Elite ES10's woofer is 10-inch whereas the SVS SB-1000 Pro features a 12-inch woofer.
Frequency Response
Elite ES10 has a frequency range of 28-250 Hz whereas SB-1000 Pro has a frequency range of 20-270 Hz. With a minimum frequency of 20Hz, the SB-1000 Pro can go significantly deeper on the low side and provide stronger bass compared to the Elite ES10's min frequency of 28Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
Polk Signature Elite ES10
High Frequency
Subwoofer Speakers
Polk Signature Elite ES10
Cabinet Type
The Polk Signature Elite ES10 has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the SVS SB-1000 Pro have Acoustic Suspension type enclosure. Acoustic Suspension aka Sealed type subwoofers have enclosures that are sealed hence no ports or holes exists on the cabinet. Sealed designs helps to provide more accurate and tight bass responses compared to ported designs.
Polk Signature Elite ES10 double Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk Signature Elite ES10's and SVS SB-1000 Pro's external dimensions. Polk Signature Elite ES10 has external dimensions of 439.0 x 332.0 x 469.0mm ( 17-1/4inch x 13-1/16inch x 18-7/16inch ) whereas SVS SB-1000 Pro has external dimensions of 343.0 x 331.0 x 402.0mm ( 13-1/2inch x 13inch x 15-13/16inch ) .
Polk Signature Elite ES10 is clearly the larger of the two speakers. Its body is 1mm wider, 96mm taller and 67mm deeper than SVS SB-1000 Pro.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk Signature Elite ES10 is approximately 1557.1cm2 / 241.4inch2 and base area of the SVS SB-1000 Pro is approximately 1330.6cm2 / 206.2inch2. The Elite ES10 requires 17% more surface area than the SB-1000 Pro which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Polk Signature Elite ES10 weighs 17.73kg / 39lbs and the SVS SB-1000 Pro weighs 11.82kg / 26lbs. This makes the Elite ES10 50% heavier than the SB-1000 Pro.
Here is a comparison of how Elite ES10 and SB-1000 Pro's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
Polk Signature Elite ES10
What's in the Box of Polk Signature Elite ES10?
Here are the items that are included inside the box of Elite ES10:
Powered subwooferGrille6-feet AC power cordOwners ManualOnline Product Registration sheet
What's in the Box of SVS SB-1000 Pro?
Here are the items that come with the SB-1000 Pro:
Powered subwooferGrille6-feet AC power cordQuick Start GuideBrochureSVS Support Information
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
20 Hz
vs
28 Hz
|
Generates deeper bass |
 High Frequency Response |
270k Hz
vs
250k Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Height |
343mm
vs
439mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1330cm2 (331x402mm)
vs
1557cm2 (332x469mm)
|
Takes less floor space |
 Price per pair* |
600USD
vs
649USD
|
costs less (*prices may change depending on the seller, location and time) |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
| General |
Polk Signature Elite ES10 |
SVS SB-1000 Pro |
| Brand |
Polk Audio |
SVS |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
200 watts |
325 watts |
| Frequency Response |
28-250 Hz |
20-270 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
200-watt RMS |
325-watt RMS |
| Watts Peak (Max) |
n/a |
820-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
12" |
| Woofer Composition |
Mineral-filled polypropylene |
Fiber-composite |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
439.0mm (17.3") |
343.0mm (13.5") |
| Width |
332.0mm (13.1") |
331.0mm (13") |
| Depth |
469.0mm (18.5") |
402.0mm (15.8") |
| Weight |
17.73kg (39lbs) |
11.82kg (26lbs) |
| Enclosure |
Bass Reflex |
Acoustic Suspension |
| Available Colors |
n/a |
Black,White |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
3 Years |
5 Years |
| Labor Warranty |
3 Years |
5 Years |