In this review, we will be comparing Monitor XT12 and Dynamo 600X, two Powered Subwoofer speakers from Polk Audio and MartinLogan. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Polk Monitor XT12 and MartinLogan 600X first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how the Polk Monitor XT12 and MartinLogan 600X compare and hopefully end up with enough arguments to decide which one of these subwoofers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Both Polk Monitor XT12and MartinLogan 600X have a single woofer setup however the Polk Monitor XT12's woofer is 12-inch whereas the MartinLogan 600X features a 10-inch woofer.
Frequency Response
Monitor XT12 has a frequency range of 24-160 Hz whereas Dynamo 600X has a frequency range of 27-200 Hz. With a minimum frequency of 24Hz, the Monitor XT12 can go slightly deeper then the Dynamo 600X's min frequency of 27Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Polk Monitor XT12 has a Bass Reflex type cabinet. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs. On the other hand the MartinLogan 600X have Bass reflex type enclosure.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk Monitor XT12's and MartinLogan 600X's external dimensions. Polk Monitor XT12 has external dimensions of 418.0 x 408.0 x 485.0mm ( 16-7/16inch x 16-1/16inch x 19-1/16inch ) whereas MartinLogan 600X has external dimensions of 415.0 x 369.0 x 420.0mm ( 16-5/16 x 14-1/2 x 16-1/2inch) .
Polk Monitor XT12 is clearly the larger of the two speakers. Its body is 39mm wider, 3mm taller and 65mm deeper than MartinLogan 600X.
Below you can see the front view size comparison of Polk Monitor XT12 and MartinLogan 600X in scale.
Comparison image of Polk Monitor XT12 and MartinLogan 600X Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk Monitor XT12 is approximately 1978.8cm2 / 306.7inch2 and base area of the MartinLogan 600X is approximately 1549.8cm2 / 240.2inch2. The Monitor XT12 requires 28% more surface area than the Dynamo 600X which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Polk Monitor XT12 weighs 17.73kg / 39lbs and the MartinLogan 600X weighs 15.91kg / 35lbs. This makes the Monitor XT12 11% heavier than the Dynamo 600X.
Here is a comparison of how Monitor XT12 and Dynamo 600X's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Polk Monitor XT12?
Here are the items that are included inside the box of Monitor XT12:
Black powered subwoofer6.5-feet AC power cordGrilleOwners ManualOnline registration card
What's in the Box of MartinLogan 600X?
Here are the items that come with the Dynamo 600X:
Powered subwoofer6.5-feet AC power cordUser-feets Manual
 Woofer Size |
12 inches
vs
10 inches
|
Larger woofer |
| Low Frequency Response |
24 Hz
vs
27 Hz
|
Generates deeper bass |
 Price per pair* |
399USD
vs
700USD
|
costs less (*prices may change depending on the seller, location and time) |
 High Frequency Response |
200k Hz
vs
160k Hz
|
Generates higher frequency |
 App-Based Control |
iOS,Android
vs
None
|
Control the speaker via an app |
 Height |
415mm
vs
418mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1549cm2 (369x420mm)
vs
1978cm2 (408x485mm)
|
Takes less floor space |
 Wireless Operation |
Optional
vs
No
|
Connect your subwoofer to your system wireless |
| General |
Polk Monitor XT12 |
MartinLogan Dynamo 600X |
| Brand |
Polk Audio |
MartinLogan |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
50 watts |
120 watts |
| Frequency Response |
24-160 Hz |
27-200 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
50-watt RMS |
120-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
12" |
10" |
| Woofer Composition |
Bi-laminate paper |
Polypropylene |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
bottom |
Physical Specs |
|
|
| Height |
418.0mm (16.5") |
415.0mm (16.3") |
| Width |
408.0mm (16.1") |
369.0mm (14.5") |
| Depth |
485.0mm (19.1") |
420.0mm (16.5") |
| Weight |
17.73kg (39lbs) |
15.91kg (35lbs) |
| Enclosure |
Bass Reflex |
Bass reflex |
| Available Colors |
n/a |
Satin Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
3 Years |
3 Yrs w/ Registration |
| Labor Warranty |
3 Years |
3 Yrs w/ Registration |